agentsclimarketplace

Debug

Skill arbazkhan971/godmode/skills/debug

Scientific debugging. Reproduce → investigate → prove root cause. Finds all bugs.From its SKILL.md

Install
npx -y skills add arbazkhan971/godmode --skill debug

Assembled from the repository path, not quoted from the project. Check it against their README if it does not work.

SKILL.md

7.1 KB, as published. Nobody here has run it

Activate When

  • /godmode:debug, "why is this happening?", "this doesn't work"

Lessons Integration

Before investigation: read .godmode/lessons.md for known root causes and debugging shortcuts. After session: append lessons about root cause patterns discovered.

The Loop

failing_count = run_tests()  # test_cmd (from stack detection), count failures
current_iteration = 0
skipped = 0

WHILE failing_count > 0 AND skipped < 3:
    current_iteration += 1
    bug = pick_highest_severity(remaining_bugs)
    technique_index = 0
    techniques = [stack_trace, git_bisect, state_inspection, binary_search]

    # 1. REPRODUCE — run failing command 3x. Consistent failure = real bug. Intermittent = add to flaky list.
    # 2. SELECT TECHNIQUE (max 5 min each):
         Stack trace → Trace Analysis | "Used to work" → `git bisect` | Regression → `git log -20`
         Intermittent/Wrong results → State Inspection | Unknown → Binary Search (eliminate half)
    # 3. INVESTIGATE — insert print/log at suspect file:line. Log: variable name=value, caller, actual vs expected.
    # 4. PROVE — state: "Bug is at {file}:{line} because {variable}={actual}, expected {expected}. Reproduce: {cmd}."
         Chain: Symptom → Why? → Why? → Root cause → Fix (file:line + diff). Min 3 'why's.
    #    Root cause found → KEEP (fix or hand off)
    #    Root cause NOT found → try next technique (step 2)
    #    All techniques exhausted → DISCARD bug (skip++), log reason_stuck + root_cause_unknown
    # 5. FIX OR HAND OFF — see Fix Handoff Protocol below
    # 6. VERIFY — re-run failing test. Then run full suite to check for regressions.
    # 7. APPEND .godmode/debug-findings.tsv: iteration, bug_id, symptom, root_cause, file:line, fix_commit, status(fixed/skipped), reason_stuck
    # 8. STATUS every 3: "{found} found, {failing_count} remaining, {skipped} skipped"
    failing_count = run_tests()

IF skipped >= 3: STOP, report partial results

Stuck Criteria

IF stuck >3 iterations on same bug:
  → Discard bug, move to next
  → Log: bug_id, reason_stuck, root_cause_unknown, skipped=true
  → Max skipped bugs: 3. After 3 skipped → stop, report partial

Reflective Diagnosis on Stuck

On 3+ iterations without finding root cause:
  Read all attempted techniques and their outputs.
  Write diagnosis: "Techniques X, Y, Z all assume {wrong assumption}.
  The actual constraint is {insight}."
  Use diagnosis to select the next technique.

Timeout Per Technique

Max 5 min per technique:
  - Stack trace: read stderr, follow call chain once
  - git bisect: binary search to <10 commits, then manual
  - State inspection: add 1-3 logs, reproduce 3x
If >5 min without progress → abandon technique, try next

Fix Handoff Protocol

After proving root cause at file:line:
  IF one-line fix: fix it, verify, commit, log
  ELSE: call /godmode:fix with proven root cause as context

Hand off SPECIFIC: "Null user.id at src/auth/login.ts:42 when session expires mid-request"
NOT vague: "auth is broken"

Output Format

Print: Debug: {found} bugs found, {fixed} fixed, {remaining} remaining in {N} iterations. Skipped: {skipped_list}.

Keep/Discard Discipline

After EACH bug investigation:
  KEEP if: root cause proven with file:line + actual vs expected values
  DISCARD if: root cause not found after all techniques exhausted
  On discard: log bug as skipped with reason_stuck. Move to next bug.
  Never keep an unproven hypothesis as a root cause.

Stop Conditions

Loop until target or budget. Never ask to continue — loop autonomously.
On failure: git reset --hard HEAD~1.

STOP when FIRST of:
  - target_reached: failing_count == 0 (all bugs fixed or handed off)
  - budget_exhausted: max iterations reached
  - diminishing_returns: 3 consecutive bugs produce no fix
  - stuck: >5 skipped bugs (skipped >= 3 already triggers stop)

Hard Rules

  1. Reproduce before investigating — no reproduce = no bug. Run the code, read stdout+stderr.
  2. Evidence required: file:line + actual vs expected values + reproduce command.
  3. One bug at a time. If stuck 3 iterations on same bug, skip it and move on.
  4. Max 5 min per technique. All techniques exhausted on a bug = discard it.
  5. Hand off specific root causes to /godmode:fix, not vague descriptions.
# Common debug commands
npm test 2>&1 | tail -20
git bisect start HEAD HEAD~20
git log --oneline -10

IF test failures > 10: prioritize by severity, fix critical first. WHEN intermittent failure (< 50% reproduce rate): add to flaky list. IF stuck > 3 iterations on one bug: skip, move to next.

Workflow

  1. Run test_cmd, count failures — this is the starting bug count.
  2. Pick highest-severity bug, reproduce it 3x to confirm it is real (not flaky).
  3. Select investigation technique: stack trace, git bisect, state inspection, or binary search.
  4. Prove root cause with "5 whys" chain — minimum 3 levels. State file:line, actual vs expected.
  5. Hand off to /godmode:fix or apply one-line fix. Verify by re-running failing test + full suite.

Rules

  1. Reproduce before investigating. No reproduce = no bug. Run the code, read stdout+stderr, paste the output.
  2. Evidence: file:line + actual vs expected values + reproduce command. Found root cause → /godmode:fix.
  3. One bug at a time. Don't fix during debug (one-line fixes excepted). If stuck 3 iterations on same bug, skip it.
  4. Max 5 min per technique. No progress → abandon technique, try next. All techniques exhausted → discard bug.
  5. Hand off specific root causes, not vague descriptions. Include file:line, variable state, and reproduce steps.
<!-- tier-3 -->

Error Recovery

FailureAction
Cannot reproduce the bugRun failing command 3x. If intermittent, add to flaky list with timestamp and environment details. Move to next bug.
git bisect fails (no good commit)Fall back to git log -20 manual inspection. Check for config or environment drift rather than code changes.
Debug logs produce no useful outputIncrease log granularity — log variable values, not only "reached here". Add caller info and stack depth.
Root cause spans multiple filesUse the "5 whys" chain. Trace data flow from symptom backward. Document each hop in the chain.

Success Criteria

  1. Every reported bug has a proven root cause with file:line and actual-vs-expected values.
  2. Fix verified by re-running the originally failing test/command.
  3. Full test suite passes after all fixes (no regressions introduced).
  4. Skipped bugs documented with reason_stuck and root_cause_unknown.

TSV Logging

Append to .godmode/debug-findings.tsv:

iteration	bug_id	symptom	root_cause	file_line	fix_commit	status	reason_stuck

One row per bug investigated. Status: fixed, skipped, handed_off.

Failure Classification

On bug SKIP: classify and append to .godmode/debug-failures.tsv with reason. Failure classes: unreproducible, environment_dependent, insufficient_context, tooling_gap, intermittent.

Keep looking

Skills are one crate of 613,757. Ordering is by how many stacks a row turns up in, so the top of any crate is what has actually been picked rather than what has the most stars.