agentsclimarketplace

The catalog

607,828 rows, by stacks then stars

  • Automated feature extraction from spectra

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/automated-feature-extraction-from-spectra Skill

    16★ repo

    Use when when you have raw or processed direct-infusion MS (DI-MS) or ASAP-MS spectra as mz/intensity pairs and need to rapidly identify salient peaks for species authentication, sample scoring, or comparative profiling without manual inspection.

  • Automated lipid identification

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/automated-lipid-identification Skill

    16★ repo

    Use when you have high-resolution tandem mass spectrometry (MS2) data in .ms2 format and need to systematically identify and annotate lipid A molecular structures.

  • Automated metabolite property computation

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/automated-metabolite-property-computation Skill

    16★ repo

    Use when you have ion mobility-mass spectrometry data (raw drift times, m/z values, and feature intensities) from DTIMS-MS or SLIM-based IMS-MS platforms and need to compute collision cross section values using a calibration standard (e.g., Agilent tune-mix).

  • Automated peak detection without conventional picking

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/automated-peak-detection-without-conventional-picking Skill

    16★ repo

    Use when you have a two-dimensional GC–MS or LC–MS dataset (m/z vs retention time) and need to identify discriminative analyte features without relying on conventional peak picking algorithms. This is especially valuable when analyzing complex, low-abundance samples (e.

  • Automated reaction network exploration

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/automated-reaction-network-exploration Skill

    16★ repo

    Use when when you have a molecular geometry (XYZ format) and need to predict electron ionization (EI) mass spectrum fragmentation patterns by exhaustively sampling conformational space and reaction intermediates.

  • Autotuner object manipulation

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/autotuner-object-manipulation Skill

    16★ repo

    Use when after AutoTuner has completed EICparams extraction and parameter estimation on raw untargeted metabolomics data (mzML, mzXML, or CDF format), and you need to pass those estimates into XCMS or MZmine2 for full dataset processing.

  • Axis label format customization

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/axis-label-format-customization Skill

    16★ repo

    Use when when designing injection plate layouts in InjectionDesign and needing to display sample positions with clear, domain-appropriate labels on the y-axis (e.g., row identifiers, well coordinates, or sample indices).

  • Backend compatibility verification visualization library

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/backend-compatibility-verification-visualization-library Skill

    16★ repo

    Use when you have mass spectrometry data loaded into a pandas DataFrame with m/z, retention time, and intensity columns, and need to confirm that pyOpenMS-Viz can produce visualizations (spectra, chromatograms, or peak maps) using a specific plotting backend (matplotlib, Bokeh, or Plotly) on real.

  • Backend merging and concatenation

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/backend-merging-and-concatenation Skill

    16★ repo

    Use when when you have two or more MsBackend objects (e.g., multiple MsBackendMemory, MsBackendDataFrame, or MsBackendMzR instances) containing distinct sets of MS spectra and you need to consolidate them into a single backend for downstream analysis, parallel processing, or export.

  • Backend performance benchmarking

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/backend-performance-benchmarking Skill

    16★ repo

    Use when when you have execution time data for visualization scripts across multiple backends (matplotlib, Bokeh, Plotly) and need to determine which backend offers the fastest median performance for specific mass spectrometry plot types (chromatogram, mobilogram, peakmap, peakmap-marginals.

  • Backend performance comparison

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/backend-performance-comparison Skill

    16★ repo

    Use when you have execution-time metrics (from a benchmark table or profiling logs) across multiple visualization backends for the same set of plots (e.

  • Backend performance tradeoff analysis

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/backend-performance-tradeoff-analysis Skill

    16★ repo

    Use when you are designing or optimizing an MsBackend implementation and need to decide whether to pre-populate the @spectraVars slot with all core spectra variable columns (mz, intensity, rtime, scanIndex, precursorMz, precursorIntensity, acquisitionNum, msLevel) at initialization time, or defer.

  • Backend routing and dispatch

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/backend-routing-and-dispatch Skill

    16★ repo

    Use when you need to support multiple plotting backends for the same data visualization task, and you want to centralize backend selection logic so that users can specify their preferred rendering engine (matplotlib, bokeh, or plotly) at call time without modifying the core plotting logic.

  • Background contamination threshold assessment

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/background-contamination-threshold-assessment Skill

    16★ repo

    Use when after batch correction of metabolomics data when you need to identify and remove compounds whose signal in background/blank samples exceeds a tolerable contamination level.

  • Background distribution generation shuffled omics

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/background-distribution-generation-shuffled-omics Skill

    16★ repo

    Use when when training a regression or neural-network model on paired microbiome and metabolome data, and you need to establish a statistically principled cutoff for identifying metabolites (or other features) whose prediction correlations are significantly better than random chance.

  • Background distribution null hypothesis testing

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/background-distribution-null-hypothesis-testing Skill

    16★ repo

    Use when when predicting one data modality (e.g., metabolite abundances) from another (e.g., microbiome composition) and you need to distinguish genuine microbe–metabolite associations from false positives driven by data compositionality, sample size artifacts, or confounding variation.

  • Background distribution significance thresholding

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/background-distribution-significance-thresholding Skill

    16★ repo

    Use when use when the workflow requires background-distribution-significance-thresholding.

  • Background distribution threshold calibration

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/background-distribution-threshold-calibration Skill

    16★ repo

    Use when when you have trained a predictive model (e.g., neural network or regression model) that outputs continuous scores (such as Spearman correlation coefficients) for individual features (e.

  • Background distribution threshold derivation

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/background-distribution-threshold-derivation Skill

    16★ repo

    Use when when you have trained predictive models (e.g., neural networks) on paired microbiome-metabolome data and need to identify which metabolites are genuinely well-predicted above chance.

  • Background ion blank comparison

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/background-ion-blank-comparison Skill

    16★ repo

    Use when after generating an initial LC-MS feature table (from Asari or similar peak detection) and before normalization or statistical analysis, especially when blank samples (e.g., solvent-only or buffer-only runs) were acquired alongside study samples.

  • Background ion contaminant removal

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/background-ion-contaminant-removal Skill

    16★ repo

    Use when you have a feature table from LC-MS data alongside blank (solvent-only) sample runs, and you want to remove features whose intensity in study samples is not substantially higher than their intensity in blanks.

  • Background ion drift detection and removal

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/background-ion-drift-detection-and-removal Skill

    16★ repo

    Use when processing MS-DIAL peak lists from untargeted LC-MS/MS experiments (DDA or DIA mode) where you suspect instrumental background contamination or ion source carry-over is generating false positive features.

  • Background reference set construction

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/background-reference-set-construction Skill

    16★ repo

    Use when when preparing to perform pathway enrichment analysis on metabolomics data, you need a background-reference file that maps metabolic pathways to their constituent metabolites.

  • Badge endpoint retrieval

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/badge-endpoint-retrieval Skill

    16★ repo

    Use when when you need to verify the current operational status of a software project across multiple dimensions (CI/CD, code quality, test coverage, containerization, archival) and those status indicators are exposed as badge endpoints in the project's README.

  • Bag of fragments representation construction

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/bag-of-fragments-representation-construction Skill

    16★ repo

    Use when after noise filtering and polarity selection of MS/MS spectra (from .mgf, .mzML, or .msp files), when you need to prepare spectra for unsupervised discovery of recurring fragmentation patterns without prior compound identification.

  • Bag of words document representation generation

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/bag-of-words-document-representation-generation Skill

    16★ repo

    Use when you have raw MS/MS spectral data in standard mass spectrometry formats and need to prepare it for unsupervised substructure discovery via topic modeling.

  • Bandwidth parameter effect comparison

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/bandwidth-parameter-effect-comparison Skill

    16★ repo

    Use when you suspect XCMS grouping contains misaligned features due to suboptimal parameter settings or insufficient samples.

  • Baseline and noise level estimation from quartile statistics

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/baseline-and-noise-level-estimation-from-quartile-statistics Skill

    16★ repo

    Use when before peak detection on a composite or individual mass track when you need to filter out low-intensity noise and baseline drift without removing true signal.

  • Baseline comparative analysis

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/baseline-comparative-analysis Skill

    16★ repo

    Use when your research proposes a new spectral embedding, matching algorithm, or retrieval method and you need to quantify its improvement over known baselines. Specifically, when you have a test dataset (e.

  • Baseline comparison analysis

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/baseline-comparison-analysis Skill

    16★ repo

    Use when when you have trained a candidate model (e.g., an ensemble, a new architecture) and need to demonstrate its advantage over published or reference implementations on the same test data.

  • Baseline comparison performance benchmarking

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/baseline-comparison-performance-benchmarking Skill

    16★ repo

    Use when when you have implemented a novel annotation algorithm or network and must verify it outperforms a simpler reference approach on held-out or independent spectral data. Specifically: (1) you have ground-truth annotations for a common test set;

  • Baseline correction algorithm selection

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/baseline-correction-algorithm-selection Skill

    16★ repo

    Use when when you have imported a raw GCxGC-MS chromatogram as a 2D-TIC (2D Total Intensity Chromatogram) object from a NetCDF file and observe steady or increasing baseline intensity caused by instrumental contamination, column bleeding, or thermal drift.

  • Baseline method comparison and benchmarking

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/baseline-method-comparison-and-benchmarking Skill

    16★ repo

    Use when you have developed or adapted an analytical method (e.g., NPFimg for GC–MS marker identification) and need to demonstrate its reliability or improved performance over a widely-used reference method (e.g., XCMS). Apply this skill when you have access to both the same raw input data (e.

  • Baseline model implementation for comparison

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/baseline-model-implementation-for-comparison Skill

    16★ repo

    Use when you are introducing a novel spectrum prediction model and need to demonstrate that performance improvements come from architectural innovation rather than experimental advantage.

  • Baseline model training and evaluation

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/baseline-model-training-and-evaluation Skill

    16★ repo

    Use when when you need to establish comparable performance baselines for a novel spectrum prediction model and require fair comparison across multiple baseline architectures. Trigger this skill when: (1) you have a new spectrum prediction approach (e.g., ICEBERG, SCARF) to benchmark;

  • Baseline noise estimation chromatogram

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/baseline-noise-estimation-chromatogram Skill

    16★ repo

    Use when after auditing and optionally rescaling a mass track (composite mass chromatogram) when you need to subtract background signal and set dynamic prominence thresholds for peak detection.

  • Basepeak intensity identification

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/basepeak-intensity-identification Skill

    16★ repo

    Use when when you have Thermo Fisher Scientific .raw files from an Orbitrap instrument and need to identify the m/z value and corresponding intensity of the most abundant ion in each MS1 scan for quality control, method optimization, or feature extraction in a modular R-based proteomics pipeline.

  • Batch aware normalization workflows

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-aware-normalization-workflows Skill

    16★ repo

    Use when your LC-MS feature table exhibits intensity variations across samples that correlate with technical batches (e.

  • Batch construction parameter optimization

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-construction-parameter-optimization Skill

    16★ repo

    Use when preparing labeled LC-MS peak data for neural network training and you need to decide whether class imbalance in your dataset should be preserved or corrected in batch construction. Use it particularly when your annotated peak dataset has unequal class distributions (e.

  • Batch corrected data extraction

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-corrected-data-extraction Skill

    16★ repo

    Use when after batch correction has been applied to metabolomics data using pooled SQC samples, and you need to retrieve the corrected ratios (compound / internal standard) for quality metrics calculation, internal standard recommendation, concentration estimation, or statistical modelling.

  • Batch corrected data visualization

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-corrected-data-visualization Skill

    16★ repo

    Use when after doAnalysis() has been completed and batch correction applied (ratio_corrected assay populated), use this skill when you need to inspect the effect of batch correction on QC sample clustering, verify that study samples group appropriately by type or aliquot, or identify remaining.

  • Batch corrected feature table validation

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-corrected-feature-table-validation Skill

    16★ repo

    Use when after applying batch correction (e.g., ComBat, SVA) to a merged feature table from non-targeted LC-MS/MS metabolomics data and before proceeding to univariate or multivariate statistical analysis.

  • Batch correction quality assessment

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-correction-quality-assessment Skill

    16★ repo

    Use when after applying pycombat-based batch correction to multi-batch interpolated feature tables in LC-MS metabolomics workflows, when you need to verify that batch effects have been attenuated without loss of data dimensionality or sample information.

  • Batch design specification

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-design-specification Skill

    16★ repo

    Use when before applying any batch effect correction function in dbnorm (dbnormPcom, dbnormNPcom, dbnormBer, dbnormBagging, Visodbnorm, or hclustdbnorm), you must first prepare and validate a batch assignment vector that maps each sample to its analytical run or batch.

  • Batch document verification

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-document-verification Skill

    16★ repo

    Use when when you have deposited a collection of JSON project documents in a platform and need to verify that all conform to the published schema before public release or after schema updates.

  • Batch effect assessment via quality metrics

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-assessment-via-quality-metrics Skill

    16★ repo

    Use when when you have processed metabolomics LC-MS/MS data organized by batch and sample type (including pooled QC replicates), and you need to quantify whether batch-to-batch and matrix effects are acceptable for downstream reporting.

  • Batch effect correction and adjustment

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-correction-and-adjustment Skill

    16★ repo

    Use when your m/z peak data spans multiple batches (recorded in metadata as a batch ID column) or samples have varying concentrations that are documented in metadata.

  • Batch effect correction application

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-correction-application Skill

    16★ repo

    Use when you have a SummarizedExperiment object containing metabolomics assay data (compound areas, internal standard areas) organized by batch and sample type (including pooled SQC samples), and you need to correct systematic variation across batches before calculating Relative Standard Deviation.

  • Batch effect correction chromatography

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-correction-chromatography Skill

    16★ repo

    Use when when analyzing untargeted LC/HRMS data from population-scale projects (n > 500) spanning multiple sample batches or instrument runs, peaks with identical or near-identical m/z values appear at systematically shifted retention times across batches due to instrument drift, column aging, or.

  • Batch effect correction combat model

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-correction-combat-model Skill

    16★ repo

    Use when your metabolomics matrix shows evidence of systematic variation correlated with batch/run assignment (detectable via PCA separation by batch, elevated batch-dependent variance, or RLA plots showing non-zero median log-ratios).

  • Batch effect correction combat sva

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-correction-combat-sva Skill

    16★ repo

    Use when you have a normalized count matrix (from Salmon or similar quantification tool) with sample metadata that documents batch variables (e.g., sequencing run, processing date, lab site), and you observe or suspect that batch effects—not biological signal—are driving variance across samples.

  • Batch effect correction in metabolomics

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-correction-in-metabolomics Skill

    16★ repo

    Use when you have a preprocessed and normalized lipid abundance matrix with documented batch identifiers and experimental group assignments, and you need to perform differential abundance testing across simple or complex experimental designs (multi-factor, repeated measures) where batch effects.

  • Batch effect correction metabolomics

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-correction-metabolomics Skill

    16★ repo

    Use when your metabolomics dataset exhibits samples analyzed across multiple batches or analytical runs with suspected technical drift or batch-to-batch signal shift visible as systematic separation in unsupervised clustering (PCA, hierarchical clustering).

  • Batch effect correction qc reference

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-correction-qc-reference Skill

    16★ repo

    Use when your peak intensity matrix exhibits batch-to-batch variation (retention time drift, signal intensity fluctuation across injection sequences), you have QC samples injected at regular intervals throughout the analysis, and you want to preserve biological signal differences while removing.

  • Batch effect correction reference based

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-correction-reference-based Skill

    16★ repo

    Use when when you have log-transformed metabolite abundance data from multiple batches (e.

  • Batch effect correction workflow

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-correction-workflow Skill

    16★ repo

    Use when you have a feature table generated from LC-MS/MS non-targeted metabolomics data that spans multiple sample preparation batches, instrumental runs, or experimental conditions.

  • Batch effect detection and quantification

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-detection-and-quantification Skill

    16★ repo

    Use when after merging feature tables from multiple LC-MS/MS analytical runs or sample cohorts processed in separate batches, and before applying batch correction.

  • Batch effect matrix construction

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-matrix-construction Skill

    16★ repo

    Use when when you need to generate synthetic metabolomics feature tables with quantified batch effects for validating batch-correction methods. Use this skill when: (1) you want reproducible, ground-truth batch effects overlaid on condition-only variation;

  • Batch effect preprocessing with replicate structure

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-preprocessing-with-replicate-structure Skill

    16★ repo

    Use when you have metabolomics data from multiple experimental batches (≥2) with embedded replicate samples (identical samples run at different points within or across batches), log-transformed raw assays containing ≥50% missing values per batch, and a need to harmonise metabolite quantification.

  • Batch effect removal metabolomic data

    HolobiomicsLab/asb-skill-collections/collections/metabolomics/v2/skills/batch-effect-removal-metabolomic-data Skill

    16★ repo

    Use when after integrating feature matrices from multiple analytical experiments or batches (e.g., n=3 or more batches). Use it when batch-related systematic variations are present in the integrated dataset before proceeding to sample separation, marker identification, or annotation steps.