Squid perf

/squid-perf

Compare sync-time performance across one or more Squid SDK deployments. Produces a self-contained HTML report and a Markdown summary in the current working directory.

Skill dir: ~/.claude/skills/squid-perf/ (scripts live in scripts/) Output dir: ./squid-perf-output/ (CWD-relative; created if missing)

---

Locked-in design (do not re-litigate)

These are settled — don't ask the user again unless they change something.

• Comparison unit: per-service (e.g., compare settlement-arbitrum in deployment A vs B independently of other services). Services present in every compared deployment go in comparison tables; services present in only some go in a "solo metrics" section with a warning.
• Sync time metric: report wall-clock elapsed (headline), active processing time (excludes gaps > 120s — configurable via --downtime-threshold), and downtime (wall − active). All three per breakpoint.
• Block alignment: assume all compared indexers cover the same block ranges (user's stated assumption). Use relative-from-first-log per deployment. If detected ranges diverge noticeably across deployments for a given service, emit a loud warning in the summary but still render.
• Tier of metrics extracted:
  • Tier 1 (always): sqd:processor / sqd:batch-processor progress lines → (ts, current_block, target_block, rate, mapping_rate, items_per_sec, eta).
  • Tier 2 (always if present): sqd:multicall latency lines, restarts (detected via current_block going backward), ERROR/WARN lines (capped at 1000/service).
  • Tier 3 (auto-discovered): any logger namespace appearing ≥10 times in ALL compared deployments for the SAME service; extract numeric fields; render as a small stats table (count, mean, median, p95).
• Breakpoint selection: percentage-based — 10 evenly-spaced breakpoints at 10%, 20%, ..., 100% of each service's effective range, where effective range = (catchupBlock - firstBlock). catchupBlock = first progress row where current >= target - 10 (indexer reached chain tip). Anything past this is steady-state, not sync, and is excluded from the metric.
  • Rationale: fraction-based clips (e.g., "99.9% of observed range") fail when the idle tail has many progress rows but few blocks — a deployment synced in 4 min and idled 10 days ends up with 99.9% of its blocks still inside the sync phase but 100% of the time inside the tail.
  • If a service has no catchup point in the logs (stillSyncing), falls back to actual lastBlock with a "never caught up" warning.
  • If a service was already caught up at the first progress row (wasAlreadyCaughtUp), the entire captured window is the idle tail — emit a warning and fall back to lastBlock (metrics reflect steady-state latency, not sync).
  • For multi-deployment comparison: shared effective range = min(catchupBlock across deployments) - firstBlock.
  • Output surfaces both the percentage and the absolute block count (e.g., "10% (500K blocks)"). Override via --breakpoints 500K,1M,5M,10M,20M (absolute block offsets from firstBlock; catchup logic does NOT apply to overrides).
• Catchup gap threshold: CATCHUP_GAP_BLOCKS = 10 (constant in report.mjs). Matches the indexer's own steady-state lag behind chain head; tuneable if a chain's head noise is higher.
• Output: self-contained HTML (Chart.js inlined — no CDN), plus Markdown with tables only (no charts in MD, link to HTML at the top).
• HTML template: the HTML report MUST be rendered from the template at ~/.claude/skills/squid-perf/templates/report.html. report.mjs reads this template and substitutes placeholders rather than building markup via string concatenation. Edit the template to change layout/styling; do not inline HTML in the script.
• Output layout:

  ./squid-perf-output/
  ├── cache/
  │   └── <ref-slug>__<since>.log (+ .done sentinel)
  ├── <ISO-timestamp>/
  │   ├── compare-syncs.json
  │   ├── parsed/<ref-slug>.json
  │   ├── report.html
  │   ├── report.md
  │   └── run.log
  └── latest -> <ISO-timestamp>/
  

• Caching: (ref, since) keyed; .done sentinel written atomically after successful fetch. --force-refresh ignores cache. Interrupted runs (no sentinel) are treated as absent.
• Fetching: parallel Bash (not subagents), one per deployment, wraps sqd logs in expect to handle the "type \"it\" to fetch more logs" pagination prompt. Retries 3× with 10s backoff. Partial success is OK (continue with ≥1 fetched deployment); if all fail, abort.
• Script language: Node (ESM, zero deps). Uses stdlib only. Shell scripts use bash + expect.
• Still-syncing detection: if last log timestamp ≤ 60s of fetch-start, flag as "live/partial" in summary.

---

Orchestration

Execute the following phases in order. Mark progress with TaskCreate/TaskUpdate as you go.

Phase 0 — Preflight

Run bash ~/.claude/skills/squid-perf/scripts/preflight.sh.

• On non-zero exit: print the script's error output verbatim, then stop. Do not proceed.
• On zero exit: continue.

Phase 1 — Collect inputs

Parse the slash-command args. Accepted shapes:

/squid-perf <ref1> [<ref2> ...]
/squid-perf --config path/to/compare-syncs.json
/squid-perf <ref1> <ref2> --breakpoints 500K,1M,5M --downtime-threshold 180 --force-refresh

Flags (all optional):

• --config <path>: read refs/since/labels from JSON (skips prompts entirely).
• --breakpoints <csv>: override auto-generated breakpoints. Accepts K/M/B suffixes.
• --downtime-threshold <seconds>: gap > N seconds counts as downtime (default 120).
• --force-refresh: ignore cache, re-fetch every deployment.

For each positional ref the user supplied:

1. Regex-validate the shape: ^[a-zA-Z0-9_-]+/[a-zA-Z0-9_-]+@[a-zA-Z0-9_-]+$. On invalid shape, report which ref is malformed and stop.
2. If since or label for that ref is missing (not in config), ask via AskUserQuestion in a single batched call:
   • "Deployment date for <ref> (ISO 8601 with Z, e.g., 2026-04-16T08:30:59Z) — used for sqd logs --since?"
   • "Short label for <ref> (e.g., 'baseline', 'optimized')? Default: derived from ref name."
3. After collecting: resolve label collisions (append _2, _3, …).

If zero positional refs and no --config, prompt: "Which indexer refs would you like to compare? Enter space-separated refs in the form <org>/<name>@<hash>, or just one for single-indexer mode."

Write the resolved config to <run-dir>/compare-syncs.json:

{
  "createdAt": "2026-04-21T14:22:03Z",
  "downtimeThresholdSec": 120,
  "breakpointsOverride": null,
  "indexers": [
    { "ref": "void/gmx-optimized-multichain-v2@oe4zvr", "since": "2026-04-16T08:30:59Z", "label": "optimized" },
    { "ref": "void/gmx-baseline-multichain-v1@xyz123",  "since": "2026-03-20T12:00:00Z", "label": "baseline" }
  ]
}

Where <run-dir> is ./squid-perf-output/<now-ISO-Z-with-colons-replaced-by-dash>/. Create it now; also ./squid-perf-output/cache/ if missing.

Phase 2 — Fetch logs (parallel Bash)

For each indexer in the resolved config, compute:

• slug = ref.replace(/[\/@:]/g, "-") (filesystem-safe)
• cache_path = ./squid-perf-output/cache/<slug>__<since-with-colons-as-dashes>.log
• sentinel_path = <cache_path>.done

If sentinel_path exists and --force-refresh is NOT set: skip fetch, reuse cache.

Otherwise, launch the fetch in parallel — one Bash(run_in_background=true) call per indexer:

bash ~/.claude/skills/squid-perf/scripts/fetch-logs.sh <ref> <since> <cache_path>

After launching all background Bash calls, poll them with BashOutput until each finishes. Don't sleep proactively — the runtime notifies on completion.

The fetch script handles:

• Retry logic (3× with 10s backoff).
• Writes to <cache_path>.partial then atomic rename + .done sentinel on success.
• On permanent failure: exits non-zero with a clear error on stderr.

After all fetches return:

• For each failure, record in failed_fetches[].
• If all failed: write a minimal report.md with the failure summary, print path, exit.
• Otherwise continue with whichever deployments succeeded. If only 1 left: single-indexer mode.

Phase 3 — Parse

For each successfully-fetched deployment, run (can be parallel, but sequential is fine — parse is fast):

node ~/.claude/skills/squid-perf/scripts/parse.mjs \
  --input <cache_path> \
  --output <run-dir>/parsed/<slug>.json \
  --label <label>

The parser streams the log, emits structured JSON per service. See scripts/parse.mjs for the exact schema it produces.

If parse fails for a deployment: record, continue. If all fail: stop with error.

Phase 4 — Compute metrics & render

node ~/.claude/skills/squid-perf/scripts/report.mjs \
  --run-dir <run-dir> \
  [--breakpoints <csv>] \
  [--downtime-threshold <seconds>]

This reads <run-dir>/compare-syncs.json + all <run-dir>/parsed/*.json, computes breakpoints per service, calculates wall/active/downtime at each breakpoint per deployment, runs Tier-3 auto-discovery, generates the summary findings, writes:

• <run-dir>/report.html (self-contained)
• <run-dir>/report.md

Phase 5 — Finalize

1. Update the ./squid-perf-output/latest symlink atomically:

   ln -sfn <ISO-timestamp-dir> ./squid-perf-output/latest
   

2. Print to the user:

   ✓ Report: ./squid-perf-output/<id>/report.html
     Markdown: ./squid-perf-output/<id>/report.md
     Cached logs: ./squid-perf-output/cache/ (re-used on next run)
     Failed fetches: <list or "none">
   

3. Mark all tasks completed.

---

Error handling

• Preflight fails: stop immediately, print install instructions from the script. Never proceed without sqd/expect/node/auth.
• Malformed ref: stop before fetching, surface the exact bad ref.
• Fetch fails for one deployment: continue with the rest. Summary gets a prominent warning.
• Fetch fails for all: write a minimal failure report and stop.
• Parse fails: treat like fetch failure for that deployment.
• Interrupted (Ctrl-C): partial cache files have no .done sentinel, so next run re-fetches. Never treat a partial as complete.
• Live deployment: if a deployment's most recent log is within 60s of fetch start, flag "live": true in parsed JSON; renderer prints a warning.
• Range divergence: if two deployments' first-block or max-block differ by > 5% for the same service, emit a warning banner in summary.
• Service missing from some deployments: intersection only for comparison tables; solo section per missing service; warning in summary.

---

Single-indexer mode

Triggered when only 1 ref is supplied (or only 1 fetch succeeded). Behavior:

• Skip "verdict" findings (no comparison).
• HTML/MD still show breakpoint table + Tier 2/3 stats per service.
• Line chart shows one series (that deployment).
• Summary block just lists services, block ranges, wall-time-to-end, and warnings.

---

Notes for future maintenance

• The "type \"it\" to fetch more logs" pagination prompt is hard-coded in fetch-logs.sh. If the sqd CLI changes its prompt, update that string.
• Chart assets ship inside templates/report.html as part of the bundler manifest; report.mjs doesn't fetch or embed Chart.js itself. To update the client renderer, re-bundle and replace the template file.
• report.mjs injects a ReportData JSON payload (schema defined inside templates/report.html as a TEMPLATE CONTRACT comment) into the <script id="__REPORT_DATA__"> slot. If the schema changes, update both the template contract and buildReportData in lockstep.
• To extend Tier-3 discovery (e.g., add known log shapes), edit parse.mjs's TIER3_EXTRACTORS.