agentsclimarketplace

Strava coach

Skill srothgan/strava-claude-skill/skills/strava-coach

Accesses and interprets an athlete's Strava data via the Strava MCP, with a coach's perspective. Use whenever the user asks about their runs, rides, swims, or workouts, training load, heart-rate/power/pace zones, segments, PRs, gear, clubs, race readiness, or wants analysis, trends, or training advice from their Strava history. Covers which tool to call, the exact data shapes and units returned, the metric-to-km/miles/pace conversions the data requires, and how to interpret the numbers (zones, relative effort, weekly load, timelines) without over-claiming.From its SKILL.md

Install
npx -y skills add srothgan/strava-claude-skill --skill strava-coach

Assembled from the repository path, not quoted from the project. Check it against their README if it does not work.

One thing to look at

  • 1 stars1 stars. Stars are a popularity signal and not a quality one, but at this level it is likely that nobody has read this closely except its author, and you would be relying on your own review.

SKILL.md

9.3 KB, as published. Nobody here has run it

Strava: data access + coaching interpretation

This skill makes you effective with the Strava MCP. It has two jobs:

  1. Get the right data with the right tool, and read its exact shape/units correctly.
  2. Interpret it responsibly -- like a knowledgeable coach, not a hype machine.

Strava MCP tools are typically prefixed mcp__claude_ai_Strava__ (the exact prefix depends on how the server is registered; match the available tool names). There is usually an auth pair (authenticate / complete_authentication) used only when the MCP is not yet connected.

First moves

  • If you're unsure access works, call health (returns {"ok": true}) or eligibility. If eligibility says you only see the eligibility tool, tell the user to start a new chat -- the full toolset can load per-session.
  • Always read the athlete profile early for any analysis. get_athlete_profile gives measurement_preference (Metric/Imperial), plus identity, body metrics, and current_focus (a stated training goal + an expires_at_local date when present). Tailor units and advice to these.
  • Don't assume the unit system -- confirm it. Read measurement_preference (Metric/Imperial) from the profile; it reflects the athlete's account settings and is your closest source of truth for how values come back. Do not hardcode "it's metric": sanity-check magnitudes, and convert to whatever unit the user asks for (km or miles), defaulting to the athlete's preference when unspecified.

Tool map -- pick the right one

NeedTool
List/scan workouts, date ranges, totalslist_activities
Deep stats for ONE activity (HR, watts, laps, segments, PRs, best efforts)get_activity_performance
Raw time-series for ONE activity (charts, splits, pacing, HR drift)get_activity_streams
Athlete identity, units, body metrics, goalget_athlete_profile
HR / power / run-pace zones, FTPget_athlete_zones
Bikes & shoes, mileage, retirementget_gear
Clubs & upcoming eventsget_club_info
A real coached planget_training_plan (WARNING may return a partner referral link, not data)
Connectivity / accesshealth, eligibility

Critical gotchas (read before trusting numbers)

  • Don't hardcode the unit system; confirm it per athlete. Values are raw numbers whose unit system tracks the athlete's account settings, so it can be metric for one user and imperial for another -- never assume. Check measurement_preference, sanity-check magnitudes, and convert to the unit the user asked for (km or miles). Typical metric forms are distance/ elevation in metres, *_speed and run-zone bounds in m/s, temp in degC; an imperial account may surface miles/feet/degF -- verify rather than trust the label.
  • Speed is not pace. Speed values (e.g. m/s) read backwards from pace: faster = higher speed but lower (faster) pace. For runs, always convert speed to pace before showing -- never show a runner a raw speed like "2.47 m/s".
  • Non-distance sports (WeightTraining, Elliptical, Yoga, etc.) return distance:0, avg_speed:0, elevation_gain:0. Don't compute pace/speed for them.
  • IDs are strings. Pass activity_id as a string.
  • Streams are index-aligned arrays. time[i], heart_rate[i], distance[i] all describe the same sample. Missing streams are silently omitted and unknown stream names are silently ignored -- check which keys actually came back (e.g. cadence/watts are absent if the device didn't record them).
  • resolution downsamples streams (higher integer = more points; omit for max granularity). Use a low value (e.g. 20-100) for trend/shape; full only when you truly need every sample.
  • Pagination is cursor-based. list_activities -> has_next_page + end_cursor; pass it back as after. get_club_info uses clubs_after.
  • HR/effort fields require a HR signal. relative_effort, average_heartrate, etc. are absent/zero without a monitor. get_activity_performance exposes has_heartrate / has_device_watts (inferred from stream presence).
  • ftp_is_estimated / is_estimated -- when true, treat FTP, power zones, and any sample race pace as rough. Say so; don't build precise prescriptions on them.
  • get_training_plan may be a referral, not data. Don't pretend it returned a plan; if the user wants a plan, build one from their data (see references/training-interpretation.md) or surface the link.

Conversions cheat sheet

Always state which unit you used. These formulas assume metric raw values (the common case); if you've confirmed an imperial account or a magnitude looks off, adjust the source unit accordingly before converting.

  • Pace min/km from speed (m/s): sec_per_km = 1000 / speed; format m:ss. e.g. 2.473 m/s -> 6:44 /km.
  • Pace min/mile from speed (m/s): sec_per_mile = 1609.34 / speed. e.g. 2.473 m/s -> 10:51 /mi.
  • Distance: km = metres / 1000; miles = metres / 1609.34.
  • Elevation: feet = metres x 3.281.
  • Speed (cycling display): km/h = m/s x 3.6; mph = m/s x 2.237.
  • Run-zone bounds are m/s -> convert each to a pace range (per km and/or mile).
  • best_efforts[].value (runs) = seconds -> format m:ss (e.g. 1914 -> 31:54).
  • Times (moving_time, elapsed_time, and the per-lap/effort times) = seconds.
  • start_local = naive local-time ISO (already the athlete's local clock).
  • Weight is kg; convert to lb = kg x 2.205 if Imperial.

Core workflows

Analyze one workout -> get_activity_performance (laps, HR, segments, PRs, best efforts) + optionally get_activity_streams for pacing/HR-drift detail. Cross-reference HR against get_athlete_zones to label intensity per lap/segment.

Weekly / load review -> list_activities with range_start/range_end (ISO LocalDateTime). Sum distance & moving_time, track relative_effort as the load proxy, and check the easy/hard balance against zones. See interpretation ref.

Race readiness for a goal -> read current_focus + expires_at_local, pull recent activities, compare current best_efforts/paces to the target, and sanity-check the timeline. Be honest about gaps.

Zone-based prescription -> get_athlete_zones, convert run zones to paces (km and mile) and HR zones to bpm ranges, then give workout targets. Flag estimates.

Going deeper

  • references/tools-and-data.md -- exact parameters, every output field, units, and quirks for each tool. Read it before parsing an unfamiliar response.
  • references/training-interpretation.md -- how to turn the numbers into sound coaching: zone models, relative effort, weekly load & progression, trend windows, timelines, and how to advise without overstepping the data.

Response templates

Use one of these templates unless the user asks for a different format. Keep the same structure even when data is thin; missing data should be labeled, not hidden.

Single-workout analysis

Window: <range or activity name>
Data source: <list_activities -> get_activity_performance -> optional get_activity_streams>
Units: <metric/imperial + confirmed from profile>

  • Quick read: <1-2 sentence summary>
  • Distance / time / load: distance=<..>, moving_time=<..>, relative_effort=<..>
  • Pace / power / HR: <pace or speed + HR/power deltas with context>
  • Intensity profile: <laps or segments, zone interpretation>
  • Limitations: <missing HR/power/temp, estimated values, small sample>
  • Suggested next step: <one actionable question to test>

Weekly load / trend review

Window: <4 weeks / 6 weeks / etc>
Units: <metric/imperial + confirmed from profile>

  • Workload table: include week-by-week distance, moving_time, relative_effort, easy/hard split
  • Trend summary: <up/down of distance and load>
  • Risk / recovery flags: <one concise note>
  • Recommendation: <2-3 practical adjustments>
  • Confidence: <what supports this and what is uncertain>

Race readiness check

Goal: <race distance/date>
Window checked: <start-end>
Units: <metric/imperial + confirmed from profile>

  • Current evidence: <best effort proxy from recent activities>
  • Gap estimate: <high level range, not guaranteed outcome>
  • Feasibility: <target timeline support with one sentence>
  • What to improve next: <max 3 training priorities>
  • What cannot be claimed: <hard limit of data>

Tone & honesty

Be a careful coach. Distinguish measured vs estimated data. State the analysis window. Don't diagnose medical issues or guarantee race outcomes. When data is thin (no HR, few activities, estimated FTP), say what you can and can't conclude.

Keep looking

Skills are one crate of 608,475. Ordering is by how many stacks a row turns up in, so the top of any crate is what has actually been picked rather than what has the most stars.