Ase code lint

@${CLAUDE_SKILL_DIR}/../../meta/ase-control.md @${CLAUDE_SKILL_DIR}/../../meta/ase-skill.md @${CLAUDE_SKILL_DIR}/../../meta/ase-dialog.md @${CLAUDE_SKILL_DIR}/../../meta/ase-getopt.md

<purpose name="ase-code-lint"> Lint Source Code </purpose>

<expand name="getopt" arg1="ase-code-lint" arg2="--auto|-a --severity|-S=(LOW|MEDIUM|HIGH) --include|-i=(none|A01|A02|A03|A04|A05|A06|A07|A08|A09|A10|A11|A12|A13|A14|A15|A16|A17|A18|A19|A20)... --exclude|-e=(none|A01|A02|A03|A04|A05|A06|A07|A08|A09|A10|A11|A12|A13|A14|A15|A16|A17|A18|A19|A20)..."> $ARGUMENTS </expand>

<objective> *Analyze* the code of `<getopt-arguments/>` for *potential problems* related to a set of code quality aspects. </objective> <flow>

1. <step id="STEP 1: Investigation"> <if condition="<ase-project-boxing/> is equal `black`">

   The project source artifacts are classified as a black box, so the user does not want them inspected or their problems surfaced. Skip the entire investigation and reporting: do not invoke any Glob or Agent tool and do not read any source, only output the following <template/> and then SKIP the remaining steps STEP 2 and STEP 3:

   <template> <ase-tpl-bullet-normal/> **LINT**: *suppressed* (`project.boxing` is `black`) </template> </if>

   First, determine the effective aspect set <aspects/>, i.e., the code quality aspects which are checked at all. For this, parse <getopt-option-include/> and <getopt-option-exclude/> as comma-separated token lists, silently dropping the none sentinel and any empty token. If a token <token/> is not one of the aspect ids A01...A20, only output the following <template/> and then STOP the entire flow (do not perform any further steps):

   <template> ⧉ **ASE**: ✪ skill: **ase-code-lint**, ▶ ERROR: invalid aspect id: **<token/>** </template>

   Otherwise set <aspects/> to all twenty aspect ids A01...A20 if both lists are empty, to the include list if only it is non-empty, to all twenty minus the exclude list if only it is non-empty, and to the include list minus the exclude list if both are non-empty. If the resulting <aspects/> is empty, only output the following <template/> and then STOP the entire flow (do not perform any further steps):

   <template> ⧉ **ASE**: ✪ skill: **ase-code-lint**, ▶ ERROR: options `--include` and `--exclude` cancel out to an empty aspect set </template>

   Then, use the following <template/> to give a hint on this step:

   <template> <ase-tpl-bullet-secondary/> **LINT INVESTIGATION** </template>

   Dispatch the investigation to sub-agents via the Agent tool so that no investigation details leak into the user-visible transcript. The sub-agents perform the silent reading and checking; only their final structured return values are consumed here.

   For this, first silently resolve <getopt-arguments/> to the list <sources/> of individual source code files, expanding any directory or wildcard references with the Glob tool. Then partition <sources/>, preserving order, into at most eight batches of roughly equal size (a single file yields a single batch), and invoke the following tool once per batch, emitting all invocations in one single message so they run in parallel:

       Agent(
           description:       "Lint Investigation (<batch-index/>/<batch-count/>)",
           subagent_type:     "ase:ase-code-lint",
           prompt:            "<aspects/> <batch/>",
           run_in_background: false
       )
   

   Here <aspects/> is the comma-separated list of the effective aspect ids (without any spaces), <batch/> is the space-separated list of the source code file paths of the corresponding batch, <batch-index/> is the 1-based index of that batch, and <batch-count/> is the total number of batches, so that each parallel invocation is distinguishable in the progress display.

   Parse the result message of each Agent tool invocation as a JSON array and concatenate all those arrays. Then deduplicate the combined list: when two problems share the same file, line, and aspect, silently drop all but the first one (sub-agents may have read overlapping related files for comprehension). Finally sort the list by file and then numerically by line, and set <problems/> to that list.

   Then determine the effective severity floor <floor/>: define the ordinal rank LOW=1, MEDIUM=2, HIGH=3, start from <floor><getopt-option-severity/></floor> (default LOW), and - if <ase-project-boxing/> is equal grey - raise <floor/> to MEDIUM whenever its current rank is below rank(MEDIUM) (grey boxing surfaces only material findings of severity MEDIUM and above).

   Then apply the effective severity floor <floor/>: Keep a problem in <problems/> if and only if its severity field is ACCEPTED or rank(severity) is greater than or equal to rank(<floor/>); silently drop all other problems. With the default floor LOW, all problems are kept. ACCEPTED problems are never dropped.

   Finally, sort the surviving problems in <problems/> by their severity field from highest to lowest in the fixed order HIGH, MEDIUM, LOW, ACCEPTED, so the subsequent reporting starts with the most severe problem. Within the same severity, keep the file/line order established above.

   You MUST NOT output anything else in this STEP 1.

   </step>
2. <step id="STEP 2: Summary">

   Use the following <template/> to output a summary of the detected problems in <problems/> (if any were found), in the original aspect ordering A01 - XXX...A20 - XXX.

   <template> <ase-tpl-bullet-secondary/> **LINT SUMMARY**:

   <ase-tpl-bullet-signal/> AX - XXX: N issues <ase-tpl-bullet-signal/> AX - XXX: N issues [...] </template>

   Else, if no problems were found, use the following <template/> to output the summary instead:

   <template> <ase-tpl-bullet-secondary/> **LINT SUMMARY**:

   (no problems detected) </template>

   You MUST NOT output anything else in this STEP 2.

   </step>
3. <step id="STEP 3: Correction">

   1. Mark this skill as the active edit-capable skill so that the ASE pre-tool-use hook auto-approves the subsequent Edit invocations on any invocation path (slash command or Skill tool). Call the ase_config_set(key: "agent.skill", val: "ase-code-lint", scope: "session:<ase-session-id/>") tool from the ase MCP server. Do not output anything in this substep.

      Critical safety invariant: the marker set here grants Edit auto-approval and MUST be cleared again (substep 3 below) before this skill yields control, regardless of how the iteration in substep 2 ends - whether it completes normally, is aborted early (e.g. an Edit failure, an unparseable value, or any other unexpected condition), or is otherwise interrupted. If you ever stop or bail out of substep 2 early, you MUST still perform substep 3 first. Never leave this marker active for a later, unrelated Edit.

   2. Set <total/> to the number of problems in <problems/> and <index/> to 0. Then iterate over all problems:

      <for items="<problems/>">

      1. Increment <index/> by one (the 1-based position of the current <item/> within <problems/>). Set <aspect/> to the aspect field of <item/>. Set <severity/> to the severity field of <item/>. Set <description/> to the description field of <item/>. Set <change-set/> to the change-set field of <item/>.

      2. Set <context></context> (set to empty). Set <diff></diff> (set to empty). Set <diff-condensed></diff-condensed> (set to empty).

      3. Iterate over the change set:

         <for items="<change-set/>">

         1. Set <file/> to the file field of <item/>. Set <change-hunks/> to the change-hunks field of <item/>.

            Unless <ase-project-boxing/> is equal grey (where the full unified diff is suppressed and this per-file header is unused), set <diff-file/> to the following <template/>:

            <template> --- <file/> (original) +++ <file/> (corrected) </template>

         2. Iterate over the change hunks.

            <for items="<change-hunks/>">

            1. Set <line/> to the line field of <item/>. Set <context-before/> to the context_before field of <item/>. Set <old-text/> to the old_text field of <item/>. Set <new-text/> to the new_text field of <item/>. Set <context-after/> to the context_after field of <item/>.

               Then normalize the hunk to its minimal form, so that the proposed diff shows exactly the lines the later Edit will actually change: while the first line of <old-text/> is identical to the first line of <new-text/>, move that line from both to the end of <context-before/> and increment <line/> by one; likewise, while the last line of <old-text/> is identical to the last line of <new-text/>, move that line from both to the front of <context-after/>. Finally, trim <context-before/> to its last two lines and <context-after/> to its first two lines.

            2. Skip this substep entirely when <ase-project-boxing/> is equal grey - the full unified diff is suppressed there, so none of the <hunk-body/>, <old-count/>, <new-count/>, <old-start/>, or <new-start/> values below are consumed (substep 4 builds only the condensed one-liner instead).

               Otherwise, determine the hunk body as an ordered list of lines, each carrying a one-character prefix ( for context, - for old-side, + for new-side). Build it by concatenating, in order and skipping any part that is empty:

               • one -prefixed line for each line of <context-before/> (if non-empty),
               • one --prefixed line for each line of <old-text/> (if non-empty; split <old-text/> on newlines),
               • one +-prefixed line for each line of <new-text/> (if non-empty; split <new-text/> on newlines),
               • one -prefixed line for each line of <context-after/> (if non-empty).

               Set <hunk-body/> to those prefixed lines joined by newlines.

               Set <old-count/> to the number of old-side hunk lines, i.e., the combined line count of <context-before/>, <old-text/>, and <context-after/> (each empty part counts as 0). Set <new-count/> to the number of new-side hunk lines, i.e., the combined line count of <context-before/>, <new-text/>, and <context-after/> (each empty part counts as 0).

               Set <old-start/> to the 1-based line number of the first old-side hunk line: if <context-before/> is non-empty, that is its line (one before <line/>); otherwise it is <line/> itself (the first line of <old-text/>). For a hunk that only inserts new lines (empty <old-text/> and empty context), set it to the line before which the insertion happens, clamped to a minimum of 0, so a top-of-file insertion yields @@ -0,0 ... @@. Set <new-start/> to the same value as <old-start/>, but clamped to a minimum of 1 whenever <new-count/> is greater than 0 (the corrected side then has a real first line).

            3. If <context/> is not empty, set <context><context/>,</context> (append a comma). Then append the following <template/> to <context/>:

               <template><file/>:<line/></template>

            4. <if condition="<ase-project-boxing/> is equal `grey`">

               The full unified diff is suppressed under grey boxing (see substep 5 below), so skip the full-diff append and instead build only a condensed one-line representation of this hunk: determine <old-snippet/> as the single-line collapse of <old-text/> (join its lines with ⏎, or ∅ when <old-text/> is empty for a pure insertion) and <new-snippet/> as the same collapse of <new-text/> (or ∅ when empty for a pure deletion). Then append the following <template/> to <diff-condensed/> as a new line:

               <template> <ase-tpl-bullet-signal/> `<file/>`:<line/>: `<old-snippet/>` → `<new-snippet/>` </template> </if> <else>

               Append the following <template/> to <diff-file/>, emitting <hunk-body/> verbatim (one already-prefixed line per line, with no extra blank or space-only lines):

               <template> @@ -<old-start/>,<old-count/> +<new-start/>,<new-count/> @@ <hunk-body/> </template> </else>
            </for>

         3. Unless <ase-project-boxing/> is equal grey (where <diff-file/> is unused), append <diff-file/> to <diff/>.

         </for>

      4. Report the problem with the following <template/>:

         <template> <ase-tpl-bullet-signal/> [<index/>/<total/>]: **<aspect/> PROBLEM** (`<severity/>`): <context/> <description/> </template>
      5. <if condition="<getopt-option-auto/> is not equal `true` and <ase-project-boxing/> is not equal `black`"> <if condition="<ase-project-boxing/> is equal `grey`">

         The project source artifacts are classified as a grey box, so the user does not want the full artifact internals surfaced: suppress the full unified diff and instead show only the condensed one-line-per-hunk representation. Report the solution with the following <template/>:

         <template> <ase-tpl-bullet-normal/> **<aspect/> SOLUTION**: <diff-condensed/> </template> </if> <else>

         Report the solution with the following <template/>:

         <template> <ase-tpl-bullet-normal/> **<aspect/> SOLUTION**:

         <diff/>
         

         </template> </else> </if> <else>

         Report the solution with the following <template/>:

         <template> <ase-tpl-bullet-normal/> **<aspect/> SOLUTION**:

         (corresponding change automatically applied)

         </template> </else>
      6. <if condition="<getopt-option-auto/> is not equal `true`">

         In the following, you MUST NOT use your built-in <user-dialog-tool/> tool! Instead, you MUST just show a custom dialog according to the expanded custom-dialog definition. You MUST closely follow this definition:

         <expand name="custom-dialog" arg1="--other"> CORRECTION: How would you like to proceed with this proposed correction? ACCEPT: Apply this proposed correction. REJECT: Skip this proposed correction. </expand> </if> <else>

         Set <result>ACCEPT</result>. You MUST NOT output anything else in this sub-step 6.

         </else>

      7. Check <result/> and dispatch accordingly:

         • <if condition="<result/> is 'ACCEPT'"> Invoke the `Edit` tool to apply the changes exactly as given by the hunks of the current <change-set/> (rendered as <diff/>, unless suppressed under grey boxing). The operation will be auto-approved by the ASE `pre-tool-use` hook (which tracks the active skill), so *no* interactive permission prompt will appear. After applying the changes, just continue with the next <item/>. </if>
         • <if condition="<result/> starts with 'OTHER'"> Generate a *new* proposal for the *same* <item/> (incorporating the user's free-text hint from <result/> if provided via the "OTHER" prefix). *Reassign* <description/> and <change-set/> to reflect this refined proposal (each change-hunk's `old_text` stays anchored to the existing text at its `file`:`line`; `new_text` carries the refinement) so that the substep 2/3 rebuild renders the new <diff/> and any `Edit` applies the new proposal rather than the original. Then loop back to substep 2 of this iteration. There is *no* cap on refinement rounds - keep refining until the user picks `ACCEPT` or `REJECT`. </if>

         • <if condition=" <result/> is 'REJECT' or <result/> is 'CANCEL' or <result/> starts with 'ERROR' "> Skip this <item/> without any Edit call and continue with the next <item/>. </if>

      </for>

   3. Clear the active edit-capable skill marker now that all Edit invocations are done, so a later unrelated Edit is not auto-approved. Call the ase_config_delete(key: "agent.skill", scope: "session:<ase-session-id/>") tool from the ase MCP server. Do not output anything in this substep.

   4. You MUST NOT output any further additional explanations or summaries at the end of this skill processing, except for the following final <template/>:

      <template> <ase-tpl-bullet-secondary/> **LINT FINISHED** </template>

   5. Finally, give the closing hints by expanding the following (which, depending on the configured <ase-guidance-level/>, may each expand into nothing and hence emit no output at all):

      <if condition="at least one problem in <problems/> was left uncorrected"> <ase-tpl-hint level="normal"> For problems whose correction demands more than a local edit, use `/ase-code-resolve` to derive and apply a full solution approach. </ase-tpl-hint> </if> <if condition="<getopt-option-auto/> is not equal `true`"> <ase-tpl-hint level="verbose"> Use `/ase-code-lint --auto` to apply all corrections unattended, `--severity` to raise the reporting floor, and `--include`/`--exclude` to narrow the checked aspects. </ase-tpl-hint> </if>
   </step>

</flow>