Rpk cluster

rpk cluster: Brokers, Config, Partitions & Maintenance

rpk cluster is the CLI front-end to the Redpanda Admin API (default port 9644). It lets you inspect and operate a running Redpanda cluster without writing raw HTTP calls. Every subcommand communicates with the Admin API unless noted otherwise (rpk cluster info, rpk cluster logdirs, and rpk cluster quotas use the Kafka protocol — they need the broker port (default 9092) and Kafka/SASL credentials, not the Admin API port 9644).

The command group has these major subgroups: health, info, logdirs, brokers, config, connections, loggers, maintenance, partitions, self-test, quotas, storage, txn, upgrade, and license.

brokers, loggers, and upgrade were added in Redpanda v26.2. Broker decommission/recommission now lives at rpk cluster brokers; the older rpk redpanda admin brokers commands still work but are hidden and deprecated (they forward to rpk cluster brokers).

Quickstart

# 1. Check cluster health (exit code 10 if unhealthy)
rpk cluster health

# 2. Inspect brokers, topics, and cluster metadata
rpk cluster info

# 3. List brokers with Admin API detail (cores, membership, liveness, version)
rpk cluster info -b --detailed

# 4. Get a single cluster config property
rpk cluster config get log_retention_ms

# 5. Set a cluster config property
rpk cluster config set log_retention_ms=604800000

# 6. Set a property with a negative value (use -- to avoid POSIX flag parsing)
rpk cluster config set -- log_retention_ms -1

# 7. Check whether any node needs a restart after a config change
rpk cluster config status

# 8. List partitions for a topic, showing leader and replica placement
rpk cluster partitions list my-topic

# 9. List ALL partitions in the cluster
rpk cluster partitions list --all

# 10. Trigger on-demand partition rebalancing
rpk cluster partitions balance

# 11. Check balancer status
rpk cluster partitions balancer-status

# 12. Move a partition's replicas to specific brokers
rpk cluster partitions move my-topic -p 0:1,2,3

# 13. Cancel all ongoing partition movements
rpk cluster partitions move-cancel

# 14. Enable maintenance mode on broker 1, waiting for drain to complete
rpk cluster maintenance enable 1 --wait

# 15. Check maintenance status across all brokers
rpk cluster maintenance status

# 16. Decommission broker 4
rpk cluster brokers decommission 4
# Monitor progress:
rpk cluster brokers decommission-status 4

# 17. Run a cluster self-test (disk + network + cloud)
rpk cluster self-test start --no-confirm
rpk cluster self-test status

# 18. Describe log directory sizes (human-readable, by topic)
rpk cluster logdirs describe -H --aggregate-into topic

# 19. Add a producer byte-rate quota for a client ID
rpk cluster quotas alter --add producer_byte_rate=180000 --name client-id=my-producer

Cluster Health and Metadata

rpk cluster health

Queries the Admin API for a health overview. A cluster is healthy when:

• All nodes are responding
• All partitions have leaders
• The cluster controller is present

rpk cluster health            # one-shot check; exits 10 if unhealthy
rpk cluster health --watch    # stream health changes
rpk cluster health --exit-when-healthy  # block until healthy

The output includes: is_healthy, unhealthy_reasons, controller_id, all_nodes, nodes_down, nodes_in_recovery_mode, leaderless_partitions (count), under_replicated_partitions (count), and high_disk_usage_nodes.

Flags: -w/--watch, -e/--exit-when-healthy, --format json|yaml|text|wide. Note: --watch and --exit-when-healthy are only available with --format text (the default). Combining them with --format json, yaml, or wide returns an error.

rpk cluster info

Fetches Kafka-protocol metadata (cluster name, brokers, topics). Aliases: rpk cluster status, rpk cluster metadata.

rpk cluster info                   # all sections (cluster, brokers, topics)
rpk cluster info -b --detailed     # brokers + Admin API extras (cores, liveness, disk)
rpk cluster info -b --include-decommissioned  # include decommissioned node UUIDs
rpk cluster info -t my-topic -d    # per-partition detail for one topic

Key flags: -b/--print-brokers, -t/--print-topics, -d/--print-detailed-topics, -i/--print-internal-topics, --detailed, --include-decommissioned.

The BROKERS section marks the controller with *. With --detailed, adds CORES, MEMBERSHIP, IS-ALIVE, VERSION, and UUID columns, plus a DISK SPACE section showing free/total/used% per path per node.

rpk cluster logdirs describe

Describes log directory sizes using the Kafka protocol.

rpk cluster logdirs describe                         # all brokers, all topics
rpk cluster logdirs describe --topics my-topic -H    # human-readable sizes
rpk cluster logdirs describe --aggregate-into broker # total per broker
rpk cluster logdirs describe --aggregate-into topic  # total per topic
rpk cluster logdirs describe -b 1                    # single broker
rpk cluster logdirs describe --sort-by-size          # largest first

Aggregate options: partition (default), broker, dir, topic.

rpk cluster connections list

Displays statistics about active and recently closed Kafka connections in the cluster — useful for finding which client applications are producing load. Notably available on Redpanda Cloud too (it maps to the Data Plane monitoring API there).

# All connections (default: subset of columns; --format=json for everything)
rpk cluster connections list

# Order by recent produce/fetch throughput or idle time
rpk cluster connections list --order-by="recent_request_statistics.produce_bytes desc"
rpk cluster connections list --order-by="recent_request_statistics.fetch_bytes desc"
rpk cluster connections list --order-by="idle_duration desc"

Shorthand filters (e.g. --client-id, --state) plus raw expressions (--filter-raw, --order-by) are available — see --help for the full list; the expression syntax follows the Admin API's ListKafkaConnections endpoint.

Brokers

rpk cluster brokers manages broker membership through the Admin API: decommission, decommission-status, and recommission (added in v26.2). There is no rpk cluster brokers list — list brokers with rpk cluster info -b --detailed. The older rpk redpanda admin brokers commands still work but are hidden and deprecated, forwarding here.

# List brokers (Admin API detail: cores, membership, liveness, version)
rpk cluster info -b --detailed

# Decommission a broker (removes from cluster, moves partitions to remaining nodes)
rpk cluster brokers decommission 4

# Monitor decommission progress
rpk cluster brokers decommission-status 4      # progress table
rpk cluster brokers decommission-status 4 -d   # includes bytes moved/remaining
rpk cluster brokers decommission-status 4 -H   # human-readable sizes

# Abort a decommission that is still in progress (once complete, cannot recommission)
rpk cluster brokers recommission 4

# Bypass the maintenance-mode/liveness pre-checks for a dead/unreachable broker
rpk cluster brokers decommission 4 --skip-liveness-check

--skip-liveness-check is the canonical bypass flag; the older --force spelling is now a hidden, deprecated alias for it.

See brokers-maintenance.md for full decommission/recommission and maintenance-mode detail.

Cluster Configuration

Cluster properties apply to all nodes and are separate from node (redpanda.yaml) properties. Changes propagate immediately.

# Get a single property value
rpk cluster config get log_retention_ms

# Set one property
rpk cluster config set log_retention_ms=604800000

# Set multiple properties (key=value notation required)
rpk cluster config set iceberg_enabled=true iceberg_catalog_type=rest

# Interactive edit (opens $EDITOR)
rpk cluster config edit

# List all available properties (use --filter for regex filtering)
rpk cluster config list
rpk cluster config list --filter="kafka.*"

# Export current config to a file
rpk cluster config export -f /tmp/cluster-config.yml

# Import config from a file
# (properties present in the schema but absent from the file are reset to
#  default within the exported visibility scope; use --all on both export and
#  import for full coverage — safest to import from a complete export)
rpk cluster config import -f /tmp/cluster-config.yml

# Validate a config file without applying it
rpk cluster config lint -f /tmp/cluster-config.yml

# Check config version and restart requirements per node
rpk cluster config status

# Force-reset: clears a property from the local node's config_cache.yaml so
# redpanda treats it as default on next startup. Use ONLY when redpanda will
# not start due to a bad config value, and ONLY while redpanda is STOPPED.
# For a normal reset-to-default, use: rpk cluster config set log_retention_ms ""
rpk cluster config force-reset log_retention_ms

See config.md for property categories, common keys, and the cluster-vs-node config distinction.

Partitions

# List partitions for specific topics
rpk cluster partitions list my-topic other-topic

# List ALL partitions in the cluster
rpk cluster partitions list --all

# Filter by partition ID
rpk cluster partitions list my-topic --partition 0,1,2

# Filter by broker ID (show only partitions with a replica on broker 2)
rpk cluster partitions list my-topic --node-ids 2

# Show only disabled partitions
rpk cluster partitions list --all --disabled-only

# Trigger on-demand balance
rpk cluster partitions balance

# Check balancer status (off/ready/starting/in_progress/stalled)
rpk cluster partitions balancer-status

# Move partition 0 of "my-topic" to brokers 1, 2, 3
rpk cluster partitions move my-topic -p 0:1,2,3

# Move partition 0 with explicit core assignment
rpk cluster partitions move my-topic -p 0:1-0,2-0,3-0

# Move using namespace-qualified topic name
rpk cluster partitions move -p foo/0:1,2,3

# Cancel all ongoing movements
rpk cluster partitions move-cancel

# Cancel movements only on broker 1
rpk cluster partitions move-cancel --node 1

# Check movement status
rpk cluster partitions move-status

# Transfer leadership for a partition (topic as positional arg, partition:target)
rpk cluster partitions transfer-leadership my-topic --partition 0:2
# Or using the fully-qualified form (no positional topic arg):
rpk cluster partitions transfer-leadership --partition my-topic/0:2

# Enable/disable a partition (emergency isolation of a corrupted partition)
# Flag is --partitions (plural); accepts {namespace}/{topic}/[partitions...] or --all
rpk cluster partitions enable  my-topic --partitions 0
rpk cluster partitions disable my-topic --partitions 0
# Disable all partitions of a topic at once:
rpk cluster partitions disable my-topic --all

# Unsafe recovery: requires --from-nodes listing permanently-lost broker IDs
# Use ONLY as a last resort when instructed by Redpanda support
rpk cluster partitions unsafe-recover --from-nodes 2,3
# Dry run (prints plan without executing):
rpk cluster partitions unsafe-recover --from-nodes 2,3 --dry

See partitions.md for balancer states, move syntax, and safe move workflows.

Maintenance Mode

Maintenance mode drains raft leadership off a node so it can be safely restarted or upgraded with minimal disruption. Only one node may be in maintenance mode at a time.

rpk cluster maintenance enable  1           # put node 1 in maintenance
rpk cluster maintenance enable  1 --wait    # wait until all leadership drained
rpk cluster maintenance disable 1           # remove node 1 from maintenance
rpk cluster maintenance status              # show status table for all nodes

Status table columns: NODE-ID, ENABLED, FINISHED, ERRORS, PARTITIONS, ELIGIBLE, TRANSFERRING, FAILED.

See brokers-maintenance.md for the rolling-upgrade playbook.

Broker Log Levels (rpk cluster loggers)

Temporarily raise or lower a broker's per-logger log level through the Admin API — the standard way to capture debug/trace logs without a restart, and without the risk of leaving debug logging on permanently (overrides expire). Added in v26.2; it replaces the now-deprecated rpk redpanda admin config log-level.

# List the loggers available on a broker (defer to this, not a static list)
rpk cluster loggers list
rpk cluster loggers list --node-id 1        # query a specific broker

# Raise one logger to debug on broker 1 for the default 300s
rpk cluster loggers set storage --node-id 1

# Several loggers at trace with a custom expiry; 0 = persist until shutdown
rpk cluster loggers set raft rpc --node-id 1 -l trace -e 60

# Every logger (the special logger "all")
rpk cluster loggers set all --node-id 1 -l debug -e 120

--node-id is required for set (it targets one broker). Flags: -l/--level (error|warn|info|debug|trace, default debug), -e/--expiry-seconds (default 300; 0 persists until shutdown). Unknown logger names are accepted (per-logger success/failure is printed), so rpk and redpanda can be upgraded independently. The logger set is broker-version specific — always discover it with rpk cluster loggers list.

Cluster Upgrade Finalization (rpk cluster upgrade)

Redpanda gates new features behind a logical cluster version that advances only once every broker reports the new binary version. Normally this finalization is automatic. When the cluster config features_auto_finalization is false, finalization is deferred so you can soak-test on the new version and still downgrade; rpk cluster upgrade (added in v26.2) inspects and completes that deferred step through the Admin API.

# Show finalization state, active vs post-finalization logical version,
# whether auto-finalization is enabled, and per-broker reported versions
rpk cluster upgrade status

# Commit the cluster to the version all brokers report (irreversible;
# activates version-gated features and raises the downgrade floor)
rpk cluster upgrade finalize
rpk cluster upgrade finalize --no-confirm

finalize is irreversible — once finalized you can no longer downgrade to the previous version. It only runs when the cluster is ready to finalize (all brokers on the same new version and live) and refuses when features_auto_finalization is enabled (the cluster finalizes on its own then). status reports the lifecycle state (finalized, ready to finalize, or upgrade in progress).

Self-Test

Benchmarks disk I/O and network throughput on cluster nodes using the Admin API. Do not run on a production cluster under heavy load.

# Start all tests (disk + network + cloud) — prompts for confirmation
rpk cluster self-test start

# Start without confirmation prompt
rpk cluster self-test start --no-confirm

# Run only disk tests
rpk cluster self-test start --only-disk-test

# Run only network tests
rpk cluster self-test start --only-network-test

# Run only cloud storage tests (requires cloud_storage_enabled=true)
rpk cluster self-test start --only-cloud-test

# Limit to specific nodes
rpk cluster self-test start --participant-node-ids 1,2

# Poll status (returns test ID + results once complete)
rpk cluster self-test status

# Stop a running test
rpk cluster self-test stop

Default durations: disk 30 s, network 30 s. Disk test suite includes 512 KB sequential r/w throughput, 4 KB latency at varying io depths, and 16 KB tests. Network test is an 8 KB throughput test between all node pairs.

See health-and-selftest.md for test descriptions and interpreting results.

Quotas

Client quotas throttle produce and consume byte rates for Kafka clients, matched by client ID or client ID prefix.

# Add a consumer byte-rate quota for client ID "my-consumer"
rpk cluster quotas alter --add consumer_byte_rate=200000 --name client-id=my-consumer

# Add a producer quota matching a client ID prefix
rpk cluster quotas alter --add producer_byte_rate=180000 --name client-id-prefix=batch-

# Add a default quota for all client IDs (no --name)
rpk cluster quotas alter --add producer_byte_rate=180000 --default client-id

# Remove a quota
rpk cluster quotas alter --delete producer_byte_rate --name client-id=my-consumer

# Dry run (validate without applying)
rpk cluster quotas alter --add consumer_byte_rate=200000 --name client-id=foo --dry

# Describe existing quotas
rpk cluster quotas describe

# Import quotas from a YAML file (flag is --from, not -f)
# --from also accepts an inline YAML/JSON string; use --no-confirm to skip prompt
rpk cluster quotas import --from /tmp/quotas.yml

Storage (Whole Cluster Restore & Mountable Topics)

rpk cluster storage interacts with Tiered Storage at the cluster level: it recovers topics/cluster state from the object-storage (archival) bucket and mounts/unmounts topics between the cluster and Tiered Storage. Both Whole Cluster Restore and mountable topics are Enterprise-licensed capabilities and require Tiered Storage (cloud_storage_enabled=true).

# --- Whole Cluster Restore / topic recovery (alias: recovery) ---
# Start restoring topics from the archival bucket (exits after starting)
rpk cluster storage restore start
# Wait for the restore to finish instead of returning immediately
rpk cluster storage restore start --wait
# Check restore progress after it has started
rpk cluster storage restore status

# --- Mountable topics (move topics in/out of the cluster via Tiered Storage) ---
# List topics in object storage that can be mounted into this cluster
rpk cluster storage list-mountable
# Mount a topic from Tiered Storage into the cluster (optionally rename with --to)
rpk cluster storage mount my-namespace/my-topic
rpk cluster storage mount my-namespace/my-topic --to my-namespace/my-new-topic
# Unmount: reject writes, flush to Tiered Storage, remove topic from the cluster
rpk cluster storage unmount my-namespace/my-topic
# List mount/unmount migrations (filter by planned|prepared|executed|finished)
rpk cluster storage list-mount
# Status of a mount/unmount migration by its migration ID
rpk cluster storage status-mount 123
# Cancel an in-progress mount/unmount migration by its migration ID
rpk cluster storage cancel-mount 123

See storage.md for the restore workflow, mount/unmount lifecycle, and migration states.

Enterprise Features

Most Redpanda differentiators are gated behind an Enterprise license and turned on through cluster config (rpk cluster config set). New clusters (24.3+) ship with a 30-day trial; on expiration, enabling/modifying these features is restricted (the cluster keeps running without data loss).

# Check license + detect violations (enterprise features without a valid license)
rpk cluster license info            # fields: Type, Expires, License Status, Violation
rpk cluster license set --path /etc/redpanda/redpanda.license   # no restart needed

# Enterprise feature gates (cluster config)
rpk cluster config set partition_autobalancing_mode continuous  # Continuous Data Balancing
rpk cluster config set core_balancing_continuous true           # Continuous core balancing
rpk cluster config set cloud_storage_enabled true               # Tiered Storage (restart)
rpk cluster config set iceberg_enabled true                     # Iceberg Topics (restart)
rpk cluster config set enable_shadow_linking true               # Shadow Linking DR
rpk cluster config set audit_enabled true                       # Audit Logging
rpk cluster config set enable_schema_id_validation redpanda     # Schema ID Validation
rpk cluster config set default_leaders_preference racks:rack1,rack2  # Leadership Pinning
rpk cluster config set delete_topic_enable false                # Topic Deletion Control
rpk cluster config set sasl_mechanisms "[SCRAM,GSSAPI,OAUTHBEARER]"  # Kerberos/OIDC
rpk cluster config set http_authentication "[BASIC,OIDC]"       # OIDC on HTTP/Admin API

The 14 enterprise-flagged cluster properties, their nested sub-settings (partition_autobalancing_*, iceberg_*, audit_*, cloud_storage_*), the license-free fallback values, and disablement-for-compliance steps are documented in enterprise-features.md. RBAC/GBAC is managed via rpk security role, and FIPS via rpk redpanda config set redpanda.fips_mode (both noted in that reference).

Reference Directory

• enterprise-features.md: Enterprise differentiators via cluster config + rpk cluster license — the 14 enterprise-flagged cluster properties with defaults/enterprise values, plus nested settings for Continuous Data Balancing, core balancing, Tiered Storage, Iceberg Topics, Shadow Linking, Remote Read Replicas, Audit Logging, Leadership Pinning, Schema ID Validation, Schema Registry authorization, Topic Deletion Control, and OIDC/OAUTHBEARER/Kerberos auth. Also notes Cloud Topics (cluster prerequisite cloud_topics_enabled, a non-enterprise deprecated property; per-topic redpanda.storage.mode=cloud). License lifecycle and compliance-disable steps.
• config.md: rpk cluster config subcommands in depth — get/set/edit/list/import/export/lint/force-reset/status, common property keys, and the cluster-vs-node config distinction.
• storage.md: rpk cluster storage subcommands — Whole Cluster Restore / topic recovery (restore start/restore status) and mountable topics (mount/unmount/list-mountable/list-mount/status-mount/cancel-mount), both Enterprise-licensed and Tiered-Storage-backed.
• partitions.md: rpk cluster partitions subcommands — list, balance, balancer-status, move (format syntax), move-cancel, move-status, enable/disable, and unsafe-recover.
• brokers-maintenance.md: broker decommission/recommission/decommission-status (via rpk cluster brokers; the legacy rpk redpanda admin brokers path is hidden/deprecated) and rpk cluster maintenance (enable/disable/status) — lifecycle, rolling upgrade playbook, and interaction with replication.
• health-and-selftest.md: rpk cluster health, rpk cluster info, rpk cluster logdirs describe, rpk cluster quotas, and rpk cluster self-test — health fields, metadata sections, log-dir aggregation, quota types, and self-test benchmarks.