Network 101
Awesome Claude Skills, Tools for Customizing Claude AI workflows
npx -y skills add ranbot-ai/awesome-skills --skill network-101Assembled from the repository path, not quoted from the project. Check it against their README if it does not work.
2 things to look at
- no licenseNo license file was found in the repository. Code published without one is not open source by default, so using it at work is a question for whoever answers licensing questions where you are.
- 6 stars6 stars. Stars are a popularity signal and not a quality one, but at this level it is likely that nobody has read this closely except its author, and you would be relying on your own review.
What its author says it does
Copied from the file, not written here
Configure and test common network services (HTTP, HTTPS, SNMP, SMB) for penetration testing lab environments. Enable hands-on practice with service enumeration, log analysis, and security testing agai
SKILL.md
5.3 KB, ~1.4k tokens by cl100k_base, as published. Nobody here has run it
Network 101
Purpose
Configure and test common network services (HTTP, HTTPS, SNMP, SMB) for penetration testing lab environments. Enable hands-on practice with service enumeration, log analysis, and security testing against properly configured target systems.
Inputs/Prerequisites
- Windows Server or Linux system for hosting services
- Kali Linux or similar for testing
- Administrative access to target system
- Basic networking knowledge (IP addressing, ports)
- Firewall access for port configuration
Outputs/Deliverables
- Configured HTTP/HTTPS web server
- SNMP service with accessible communities
- SMB file shares with various permission levels
- Captured logs for analysis
- Documented enumeration results
Core Workflow
1. Configure HTTP Server (Port 80)
Set up a basic HTTP web server for testing:
Windows IIS Setup:
- Open IIS Manager (Internet Information Services)
- Right-click Sites → Add Website
- Configure site name and physical path
- Bind to IP address and port 80
Linux Apache Setup:
# Install Apache
sudo apt update && sudo apt install apache2
# Start service
sudo systemctl start apache2
sudo systemctl enable apache2
# Create test page
echo "<html><body><h1>Test Page</h1></body></html>" | sudo tee /var/www/html/index.html
# Verify service
curl http://localhost
Configure Firewall for HTTP:
# Linux (UFW)
sudo ufw allow 80/tcp
# Windows PowerShell
New-NetFirewallRule -DisplayName "HTTP" -Direction Inbound -Protocol TCP -LocalPort 80 -Action Allow
2. Configure HTTPS Server (Port 443)
Set up secure HTTPS with SSL/TLS:
Generate Self-Signed Certificate:
# Linux - Generate certificate
sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
-keyout /etc/ssl/private/apache-selfsigned.key \
-out /etc/ssl/certs/apache-selfsigned.crt
# Enable SSL module
sudo a2enmod ssl
sudo systemctl restart apache2
Configure Apache for HTTPS:
# Edit SSL virtual host
sudo nano /etc/apache2/sites-available/default-ssl.conf
# Enable site
sudo a2ensite default-ssl
sudo systemctl reload apache2
Verify HTTPS Setup:
# Check port 443 is open
nmap -p 443 192.168.1.1
# Test SSL connection
openssl s_client -connect 192.168.1.1:443
# Check certificate
curl -kv https://192.168.1.1
3. Configure SNMP Service (Port 161)
Set up SNMP for enumeration practice:
Linux SNMP Setup:
# Install SNMP daemon
sudo apt install snmpd snmp
# Configure community strings
sudo nano /etc/snmp/snmpd.conf
# Add these lines:
# rocommunity public
# rwcommunity private
# Restart service
sudo systemctl restart snmpd
Windows SNMP Setup:
- Open Server Manager → Add Features
- Select SNMP Service
- Configure community strings in Services → SNMP Service → Properties
SNMP Enumeration Commands:
# Basic SNMP walk
snmpwalk -c public -v1 192.168.1.1
# Enumerate system info
snmpwalk -c public -v1 192.168.1.1 1.3.6.1.2.1.1
# Get running processes
snmpwalk -c public -v1 192.168.1.1 1.3.6.1.2.1.25.4.2.1.2
# SNMP check tool
snmp-check 192.168.1.1 -c public
# Brute force community strings
onesixtyone -c /usr/share/seclists/Discovery/SNMP/common-snmp-community-strings.txt 192.168.1.1
4. Configure SMB Service (Port 445)
Set up SMB file shares for enumeration:
Windows SMB Share:
- Create folder to share
- Right-click → Properties → Sharing → Advanced Sharing
- Enable sharing and set permissions
- Configure NTFS permissions
Linux Samba Setup:
# Install Samba
sudo apt install samba
# Create share directory
sudo mkdir -p /srv/samba/share
sudo chmod 777 /srv/samba/share
# Configure Samba
sudo nano /etc/samba/smb.conf
# Add share:
# [public]
# path = /srv/samba/share
# browsable = yes
# guest ok = yes
# read only = no
# Restart service
sudo systemctl restart smbd
SMB Enumeration Commands:
# List shares anonymously
smbclient -L //192.168.1.1 -N
# Connect to share
smbclient //192.168.1.1/share -N
# Enumerate with smbmap
smbmap -H 192.168.1.1
# Full enumeration
enum4linux -a 192.168.1.1
# Check for vulnerabilities
nmap --script smb-vuln* 192.168.1.1
5. Analyze Service Logs
Review logs for security analysis:
HTTP/HTTPS Logs:
# Apache access log
sudo tail -f /var/log/apache2/access.log
# Apache error log
sudo tail -f /var/log/apache2/error.log
# Windows IIS logs
# Location: C:\inetpub\logs\LogFiles\W3SVC1\
Parse Log for Credentials:
# Search for POST requests
grep "POST" /var/log/apache2/access.log
# Extract user agents
awk '{print $12}' /var/log/apache2/access.log | sort | uniq -c
Quick Reference
Essential Ports
| Service | Port | Protocol |
|---|---|---|
| HTTP | 80 | TCP |
| HTTPS | 443 | TCP |
| SNMP | 161 | UDP |
| SMB | 445 | TCP |
| NetBIOS | 137-139 | TCP/UDP |
Service Verification Commands
# Check HTTP
curl -I http://target
# Check H
What ships with it
Read from the repository
Just SKILL.md. No reference files, no scripts.