Github copilot repo instructions

github-copilot-repo-instructions

Repository-scoped Copilot guidance. Markdown files in .github/ that GitHub Copilot reads on every request against the repo.

Generic, doc-faithful. For an opinionated generator that bakes in specific engineering principles, see the setup mode of /copilot — /copilot setup (if installed).

For the multi-mode Copilot driver (review / delegate / setup), see /copilot (if installed) — this skill only writes and audits the instruction files.

---

File layout

File	Scope	Frontmatter	Notes
.github/copilot-instructions.md	Repo-wide, every request	None	Single file. Keep ≤ 2 pages.
.github/instructions/<name>.instructions.md	Path-glob	Required (applyTo)	Multiple files allowed. Filename must end .instructions.md.
AGENTS.md	Nearest-wins	None	Place anywhere in the tree; the file closest to the edited path wins.
CLAUDE.md	Repo root only	None	Single file at root.
GEMINI.md	Repo root only	None	Single file at root.

The repo-wide file and path-specific files combine when a path matches — both sets of instructions are sent to Copilot together.

---

Frontmatter (path-specific files only)

---
applyTo: "**/*.ts, **/*.tsx"
excludeAgent: "code-review"
---

- Prefer `interface` over `type` for object shapes.
- Use named exports.

Field	Required	Values
applyTo	Yes	Glob pattern, or comma-separated globs (*.py, src/**/*.rb, **/subdir/**/*.py).
excludeAgent	No	"code-review" or "cloud-agent" — hides this file from that surface.

---

Surfaces

Copilot reads repo instructions across these surfaces:

• Copilot Chat — github.com/copilot (with repo attached) and IDE chat.
• Copilot code review — PR reviews. Toggleable per-repo. Reads from the base branch, not the feature branch.
• Copilot coding agent (cloud agent) — issue-driven implementations.

Path-specific files (.github/instructions/*.instructions.md) are fully supported on github.com for code-review and the cloud agent. IDE support for path-specific files lags — repo-wide file is the safer bet for IDE coverage.

---

Precedence

When multiple instruction sets exist, all are merged and sent to Copilot. Stated priority order (highest → lowest):

1. Personal instructions (per-user, github.com Chat only).
2. Repository instructions (this skill).
3. Organization instructions.

Conflicts are not auto-resolved — Copilot sees them all. If quality drops, temporarily disable a set rather than fighting overlap.

---

Protocol

Add repo-wide instructions

1. mkdir -p .github
2. Write .github/copilot-instructions.md. Markdown only, no frontmatter.
3. Keep it ≤ 2 pages. Whitespace is ignored, so use bullets liberally.
4. Content that pulls weight: stack summary, build/test commands, layout map, non-obvious conventions. Skip generic advice Copilot already knows.
5. Commit on the base branch (usually main) — code review reads from base.

Add path-specific instructions

1. mkdir -p .github/instructions
2. Create <name>.instructions.md with applyTo frontmatter.
3. One file per scope (e.g. python.instructions.md, frontend.instructions.md).
4. Use excludeAgent to keep review-only or coding-agent-only guidance from leaking into the other surface.

Enable Copilot code review

Repo Settings → Code & automation → Copilot → Code review → toggle "Use custom instructions when reviewing pull requests".

Default is enabled, but confirm — orgs sometimes flip it off.

Enable automatic Copilot review on every PR

Two paths — pick one. Both create a branch ruleset; the API path is scriptable.

UI — Settings → Rules → Rulesets → New branch ruleset. Under "Branch rules", select Automatically request Copilot code review. Two sub-toggles: Review new pushes (re-review on each push, burns premium requests) and Review draft pull requests.

API (gh) — the rule type is copilot_code_review. It is not listed on the rulesets schema page as of writing, but the endpoint accepts it. Targets work like any other ruleset.

gh api repos/<owner>/<repo>/rulesets -X POST --input - <<'JSON'
{
  "name": "copilot-auto-review",
  "target": "branch",
  "enforcement": "active",
  "conditions": { "ref_name": { "include": ["~DEFAULT_BRANCH"], "exclude": [] } },
  "rules": [
    {
      "type": "copilot_code_review",
      "parameters": {
        "review_on_push": false,
        "review_draft_pull_requests": false
      }
    }
  ]
}
JSON

Defaults shown are conservative: review once on PR open, skip drafts. Flip review_on_push to true to re-review on every push — useful for agentic workflows, expensive on premium-request quota.

Requires Copilot Business/Enterprise on the org, or Copilot Pro for personal repos. The ruleset still installs without a license; reviews just don't fire.

For the full knob inventory across repo / org / per-PR — including what Copilot review cannot do (no "request changes" mode, no severity threshold, no API re-request) — read references/code-review-knobs.md.

Verify Copilot is reading the file

1. Open github.com/copilot and attach the repo.
2. Ask any Copilot Chat question.
3. Expand the References list at the top of the response.
4. .github/copilot-instructions.md should appear; click to confirm it's the version you expect. Path-specific files appear when relevant paths are mentioned or attached.

For PR review verification, look at the review comment metadata or trigger a review on a PR that touches a glob covered by a path-specific file.

---

Audit checklist

When the user says "audit our Copilot config":

1. ls -la .github/copilot-instructions.md .github/instructions/ AGENTS.md CLAUDE.md GEMINI.md 2>/dev/null (silence missing files).
2. Read each present file and check:
   • Repo-wide file ≤ 2 pages.
   • Every path-specific file has applyTo frontmatter.
   • Filenames end .instructions.md (path-specific only).
   • excludeAgent values are exactly "code-review" or "cloud-agent".
   • No instructions baked into the repo-wide file that should be path-scoped (e.g. "always add type hints" — that's Python-only, hoist it).
3. Check the base branch in git log — recent edits to instructions on a feature branch won't be seen by code review until merged.
4. Flag conflicts with org-level or expected personal instructions.

---

Rules

• Repo-wide file: no frontmatter. GitHub does not document frontmatter on .github/copilot-instructions.md. Don't add applyTo there.
• Path-specific file: frontmatter is mandatory. Without applyTo the file is ignored.
• Don't put task-specific instructions in either ("fix bug X", "do refactor Y") — they're long-lived configuration, not ticket scope.
• Don't duplicate org instructions. If your org already says "use Conventional Commits", don't repeat it at repo level.
• Code review reads base branch. PR-only changes to instructions don't affect that PR's own review.
• Don't include secrets, tokens, or internal URLs. These files are part of the repo — anyone with read access sees them.

---

Gotchas

• A path-specific file with malformed YAML frontmatter is silently dropped. Validate frontmatter before committing.
• If a glob isn't matching as expected, prefix with **/ to cover nested paths (**/*.py covers nested files; *.py may only cover the root, depending on the glob engine).
• The IDE may cache instructions; reload the window after editing.
• AGENTS.md is recursive — a deeply nested AGENTS.md overrides a higher one for files near it. Useful, but confusing if the user expects merging.
• CLAUDE.md and GEMINI.md are also read by Copilot now, even though they originated as other-vendor files. If you maintain both, expect Copilot to see all three.
• Personal instructions take precedence over repo guidance for that one user on github.com Chat — symptoms look like "Copilot ignores our rules for Alice but works for everyone else". Check /github-copilot-personal-instructions.
• The repo-wide file's only documented size guidance is "≤ 2 pages". Treat that as the ceiling — long instructions crowd out the actual question.

---

What this skill is not

• Not a setup wizard — it advises and edits, does not interview.
• Not the same as /copilot setup (if installed) — that mode of the /copilot driver bakes in a specific style.
• Not personal instructions — see /github-copilot-personal-instructions.
• Not org-level instructions — those are configured in GitHub Enterprise org settings, outside any repo.

---

Source

• Add repository custom instructions for GitHub Copilot