Appstore generate push screenshots

Capture and push App Store screenshots

Drives the capture → review → upload phase of the App Store screenshot workflow. The seed catalog must already be complete (python3 scripts/screenshot_content/check_content.py exits 0); generate it with /appstore:generate-screenshot-seeding first if it is not.

This skill does two long-running things back to back:

1. Capture — fastlane screenshots drives the AppStoreScreenshots UI test on the Simulator (50 locales × 2 devices, ~2 h), then renames the captured runtime-code folders to App Store storefront codes (rename_for_deliver.py, run automatically by the lane).
2. Upload — upload_with_retry.sh pushes the captured shots to App Store Connect, working around ASC's HTTP 500s. Nothing goes live (submit_for_review:false); shots stage into the "Prepare for Submission" version.

Both phases run in the background with 20-minute progress ticks, so the whole skill runs unattended apart from (at most) two choices: whether to re-capture when shots already exist (step 2, only asked if capture is already complete) and the pause-vs-upload choice (step 3). Both are skippable via arguments.

Preflight — orchestrator model (before anything else)

Before any other step, run the orchestrator-model preflight (canonical: AGENTS.md → "Orchestrator-model preflight"). This skill is tuned to orchestrate on Sonnet; if the current session model is not Sonnet, stop and confirm (AskUserQuestion on Claude Code, a markdown block on Cursor) before running anything. This skill has no subagents — it's pure capture/upload mechanics — so the only concern is that a model weaker than Sonnet may handle the tick-loop and success-verification steps unreliably; Opus works but is pricier for no gain.

Arguments — how to run fully unattended

The invocation may carry optional arguments that pre-answer the prompts, so there is zero prompting. Arguments are space-separated and order-independent; they fall on two independent axes.

Capture axis (pre-answers the step-2 re-capture prompt, only relevant when shots already exist):

• recapture (also accepts fresh, overwrite) → clear the existing shots and re-capture from scratch (the ~2 h job), even if capture is already complete.
• keep (also accepts reuse, skip-capture) → reuse the existing shots and skip capture.
• no capture argument → if capture is already complete, ask the step-2 prompt once (the safe default; recapture is a ~2 h job that overwrites already-inspected shots). If capture is missing or partial, capture runs regardless — no prompt.

Upload axis (pre-answers the step-3 choice):

• upload-now (also accepts b, no-pause, auto) → Option B: capture, then upload immediately; review page opens for post-upload review.
• pause (also accepts a, inspect) → Option A: capture, open the review page, and pause for an explicit "proceed" before uploading.
• no upload argument → ask the step-3 choice once (the safe default; uploading to ASC is outward-facing, so absent explicit authorization, confirm first).

If the user's surrounding message already authorizes the action (e.g. "re-capture everything" → recapture; "keep the existing shots" → keep; "push them without stopping" / "upload as autonomously as possible" → upload-now), treat that as the matching argument and do not prompt for that axis.

Autonomy

Apart from the step-2 re-capture prompt (only asked when shots already exist, and skippable via the capture-axis argument above) and the step-3 choice (skippable via the upload-axis argument), run end to end without pausing: do not ask "shall I proceed?" between steps, do not ask before re-capturing failed locales, and do not ask before retrying a failed upload subset — all of that is routine and pre-approved in .claude/settings.json. The only other time you stop is a hard failure you cannot self-heal (e.g. the capture lane fails to build) — surface the log tail and stop.

Progress checklist

Print this checklist unchecked at the start, then re-print it (compact, one line per step) with - [x] as each step completes:

0. Model preflight — confirm session is Sonnet (else confirm before proceeding)
1. Precondition — seed catalog complete (check_content.py exits 0)
2. Capture status — is capture already done? (capture_progress.py); if done, ask re-capture vs reuse (unless pre-answered by argument)
3. Choice — Option A (pause) or B (upload now), or pre-answered by argument
4. Capture — fastlane screenshots (skipped if step 2 says done)
5. Review page — open fastlane/screenshots/screenshots.html
6. Gate — [A] pause for "proceed"; [B] continue immediately
7. Upload — upload_with_retry.sh running in background
8. Done — verify all storefronts confirmed; [B] remind review page is open

Omit steps that provably won't run (e.g. skip step 4 when capture is already complete and you chose to keep the existing shots) and say why.

Recipe

1. Precondition — seed catalog complete

python3 scripts/screenshot_content/check_content.py

• Exit 0: continue.
• Exit non-zero: stop. The seed catalog has gaps — tell the user to run /appstore:generate-screenshot-seeding first. Do not capture against an incomplete catalog.

2. Capture status — is capture already done?

python3 scripts/screenshot_content/capture_progress.py

Reports N/M locales done and exits 0 only when every locale has its full 5-shot story for every device. It accepts both runtime-code folders (mid-capture) and storefront-code folders (post-rename), so it reads correctly whether capture just finished or never ran.

• Exit non-zero: capture is needed (or partial). Step 4 runs it — no re-capture prompt (there is nothing to overwrite).

• Exit 0: capture is already complete. Do not silently skip — ask whether to re-capture or reuse, unless the capture-axis argument (or the surrounding message) already pre-answered it (see Arguments). Ask once with AskUserQuestion:

  Question: "Screenshots are already captured (N/M locales, 2 devices each). Re-capture and overwrite them, or keep the existing ones?"

  • Keep existing (recommended): skip capture (step 4) and go straight to the review/upload steps. Recapture is a ~2 h job that would overwrite the already-captured (possibly already-inspected) shots.
  • Re-capture (overwrite): clear the old shots and run the full capture.

  Cursor / no-AskUserQuestion: present the choice as a markdown block and wait for the reply (unless pre-authorized).

  Then branch:

  • Keep / keep: skip step 4. Note this in the checklist.
  • Re-capture / recapture: clear the existing shots so capture_progress.py no longer reports "done", then run step 4:

    rm -rf fastlane/screenshots/*
    

    (This is the only path that wipes fastlane/screenshots/. It is gated behind the explicit re-capture choice — never clear shots on the "keep" path.)

3. Choice — the one human input (skip if pre-authorized)

If an argument or the surrounding message already pre-answered this (see Arguments), skip the prompt and record the chosen option. Otherwise ask once, before the long capture, with AskUserQuestion:

Question: "Capture + upload screenshots. How would you like to proceed?"

• A — Pause for inspection (recommended): after capture, open the review page and pause; you say "proceed" when ready to upload.
• B — Upload without pausing: after capture, start the upload immediately; the review page opens so you can look while it uploads.

Cursor / no-AskUserQuestion: present the choice as a markdown block and wait for the reply (unless pre-authorized).

Record the answer (A or B) — it determines step 6.

4. Capture — fastlane screenshots

Skip entirely if step 2 was already complete and you chose "keep". Run it when capture was missing/partial, or when you chose "re-capture" in step 2 (the old shots are already cleared at that point). Run in the background (run_in_background: true):

fastlane screenshots 2>&1 | tee tmp/screenshots-capture.log

This is the ~2 h capture; the lane renames folders to storefront codes when it finishes. Track it on 20-minute ticks:

1. Launch sleep 1200 as a background Bash task (run_in_background: true).
2. On its completion notification, run python3 scripts/screenshot_content/capture_progress.py, report the done/pending diff in one line, then re-arm the next sleep 1200.
3. Stop re-arming when the fastlane screenshots background task exits.

Judge capture success by capture_progress.py, not by the task's exit code. The command is piped through tee, so the reported exit status is tee's, not fastlane's — it is unreliable. When the capture task exits, run capture_progress.py and branch on its exit:

• Exit 0 (all locales done): go to step 5.
• Exit non-zero with some locales done (partial capture — a few locales flaked): self-heal, don't stop. Re-capture only the pending runtime codes it lists, then re-rename, then re-check:

  fastlane snapshot --languages <pending runtime codes, comma-separated> --clear_previous_screenshots false 2>&1 | tee tmp/screenshots-recapture.log
  python3 scripts/screenshot_content/rename_for_deliver.py
  python3 scripts/screenshot_content/capture_progress.py
  

  --clear_previous_screenshots false is mandatory here — the Snapfile sets clear_previous_screenshots(true) for full runs, so without this override snapshot would wipe the entire fastlane/screenshots/ tree (every already-good locale) before recapturing just these few. (snapshot reuses the device list from fastlane/Snapfile; the pending codes are exactly what capture_progress.py prints under "pending".) Loop until capture_progress.py exits 0. Run the recapture in the background with the same 20-minute ticks.
• Exit non-zero with zero done (the lane never produced shots — usually a build/test failure): surface the tail of tmp/screenshots-capture.log and stop. This is the one hard-failure case; do not upload nothing.

Do not use the Monitor tool for ticks — it prompts on each re-arm. sleep *, capture_progress.py, and screenshot_status.sh are all allowlisted and never prompt. See memory feedback_no_prompt_periodic_progress.

5. Open the review page

open fastlane/screenshots/screenshots.html

Opens in the user's default browser, for both A and B.

6. Gate on the step-3 choice

• Option A — pause: stop and tell the user:

  "Review page open at fastlane/screenshots/screenshots.html. Let me know when you're ready to upload."

  Wait for an explicit "proceed" (or equivalent) before step 7. Do not auto-continue on a timer.

• Option B — continue: proceed straight to step 7; the page stays open for post-upload review.

7. Upload — self-healing retry controller

Never use bare fastlane push_screenshots — it hangs indefinitely on ASC HTTP 500s. Use the controller, in the background (run_in_background: true):

bash scripts/screenshot_content/upload_with_retry.sh 2>&1 | tee tmp/screenshots-upload.log

Nothing goes live until App Store Connect review; submit_for_review:false is baked into the lanes. Track it on 20-minute ticks, same pattern as step 4 but using the status helper:

1. Launch sleep 1200 as a background Bash task.
2. On its completion notification, run bash scripts/screenshot_content/screenshot_status.sh, report the status in one line, then re-arm the next sleep 1200.
3. Stop re-arming when the upload background task exits.

screenshot_status.sh reports local capture progress, running processes, the controller's recent log, and per-storefront upload confirmation — prefer it over ad-hoc ps / find / grep pipelines, which are not allowlisted and will prompt.

8. Verify completion and self-heal stragglers

When the upload background task exits, do not trust its exit code (piped through tee). Determine success from authoritative state:

bash scripts/screenshot_content/screenshot_status.sh

• All storefronts confirmed (and tmp/upload-controller.log shows a SUCCESS line): report success — all shots staged in App Store Connect. If Option B, remind the user the review page is at fastlane/screenshots/screenshots.html.
• Some storefronts unconfirmed (controller log shows EXHAUSTED, or screenshot_status.sh lists "not fully" storefronts): re-push just those, no prompt. Take the unconfirmed storefront names and run, in the background:

  SUBSET_ONLY="<storefront codes, space-separated>" bash scripts/screenshot_content/upload_with_retry.sh 2>&1 | tee tmp/screenshots-upload.log
  

  A clean controller SUCCESS line for the subset confirms ASC accepted them. Loop (re-check with screenshot_status.sh) until every storefront is confirmed.

9. Cleanup — offer to clear tmp working files

After all storefronts are confirmed, offer to clear this run's gitignored tmp logs/staging (tmp/screenshots-capture.log, tmp/screenshots-recapture.log, tmp/screenshots-upload.log, tmp/upload-controller.log, tmp/fastlane-push-*.log, tmp/screenshots-subset/). Ask first; leave fastlane/screenshots/ (the captured deliverables) in place unless the user asks to remove them.

Commands reference

python3 scripts/screenshot_content/check_content.py          # seed catalog gate
python3 scripts/screenshot_content/capture_progress.py       # capture done vs pending (authoritative)
rm -rf fastlane/screenshots/*                                 # clear shots before a chosen full re-capture (overwrite path only)
fastlane screenshots                                          # capture (~2 h) + auto-rename
fastlane snapshot --languages ja,de,ar --clear_previous_screenshots false  # re-capture a few runtime codes WITHOUT wiping the rest
python3 scripts/screenshot_content/rename_for_deliver.py     # rename runtime→storefront after a snapshot recapture
open fastlane/screenshots/screenshots.html                    # open review page
bash scripts/screenshot_content/upload_with_retry.sh         # full upload with retry
SUBSET_ONLY="kn-IN ru" bash scripts/screenshot_content/upload_with_retry.sh  # re-push stragglers
bash scripts/screenshot_content/screenshot_status.sh         # running jobs + upload confirmation (authoritative)

When NOT to use this skill

• To generate the seed catalog → /appstore:generate-screenshot-seeding.
• To transcreate App Store text metadata → /appstore:translate-metadata.