Multiqc qc reports

MultiQC — Multi-Sample QC Report Aggregator

Overview

MultiQC automatically searches directories for QC log files from 150+ bioinformatics tools and aggregates statistics across all samples into a single interactive HTML report. It parses outputs from FastQC, samtools flagstat, STAR, HISAT2, Trim Galore, Salmon, Kallisto, featureCounts, Picard, GATK, and many more — eliminating the need to manually review per-sample QC files. Reports include interactive bar plots, scatter plots, heatmaps, and tables with configurable warnings and pass/fail thresholds.

When to Use

• Reviewing QC metrics across 10+ samples at once after FastQC, alignment, or quantification
• Final QC checkpoint before differential expression or variant analysis
• Sharing QC summaries with collaborators or including in publications
• Identifying batch effects, outlier samples, or failed sequencing runs
• Combining QC from multi-step pipelines (trimming → alignment → quantification) into one view
• Use FastQC directly instead for initial single-sample QC exploration
• For custom QC metrics not from standard tools, use Python/R directly; MultiQC parses tool outputs only

Prerequisites

• Python packages: multiqc
• Input requirements: Output files from bioinformatics tools (FastQC .zip, samtools .flagstat, STAR Log.final.out, etc.) — MultiQC finds them automatically
• Environment: Python 3.8+

Check before installing: The tool may already be available in the current environment (e.g., inside a pixi / conda env). Run command -v multiqc first and skip the install commands below if it returns a path. When running inside a pixi project, invoke the tool via pixi run multiqc rather than bare multiqc.

pip install multiqc

# Verify
multiqc --version
# MultiQC v1.25.0

# With conda (recommended for bioinformatics)
conda install -c bioconda multiqc

Workflow

Step 1: Generate Tool-Specific QC Files

MultiQC aggregates existing output — first run your QC tools.

# FastQC on all FASTQ files
mkdir -p qc/fastqc
fastqc data/*.fastq.gz -o qc/fastqc/ -t 8

# samtools flagstat on all BAM files
for bam in results/*.bam; do
    samtools flagstat $bam > qc/$(basename $bam .bam).flagstat
done
echo "QC files generated: $(ls qc/ | wc -l)"

Step 2: Run MultiQC on a Directory

MultiQC recursively scans for recognized QC files.

# Basic run: scan current directory recursively
multiqc .

# Specify output directory and report name
multiqc . -o reports/ -n project_qc_report

# Scan specific subdirectories only
multiqc qc/fastqc/ results/star/ logs/trimming/ -o reports/

# Output: reports/project_qc_report.html
echo "Report: reports/project_qc_report.html"

Step 3: Configure Report Behavior

Use multiqc_config.yaml to set custom thresholds, sample naming, and module order.

# multiqc_config.yaml — place in working directory
title: "RNA-seq QC Report — Project X"
subtitle: "Analysis date: 2026-02"
intro_text: "Quality control summary for all 48 samples."

# Sample name cleaning: remove path prefixes and suffixes
fn_clean_exts:
  - ".fastq.gz"
  - "_R1"
  - ".sorted"

# Thresholds for pass/warn/fail coloring
general_stats_addcols:
  FastQC:
    pct_duplication:
      max: 40
      warn: 30

# Module run order
module_order:
  - fastqc
  - trimgalore
  - star
  - featurecounts
  - samtools

# Run with config file
multiqc . --config multiqc_config.yaml -o reports/

Step 4: Use MultiQC Modules and Filters

Control which tools and samples are included.

# Run only specific modules
multiqc . --module fastqc --module samtools

# Exclude specific modules
multiqc . --exclude fastqc

# Include only files matching a pattern
multiqc . --filename "*.flagstat" --filename "*_fastqc.zip"

# Ignore specific directories or files
multiqc . --ignore "tmp/" --ignore "*.bam"

# Add sample name regex substitution
multiqc . --replace-names "sample_" ""

Step 5: Export Data for Downstream Analysis

Extract machine-readable statistics from the MultiQC report.

# Export data tables (CSV, JSON, YAML, TSV)
multiqc . -o reports/ --data-format json
# Generates: reports/multiqc_data/multiqc_data.json

# Export flat CSV tables per tool
multiqc . -o reports/ --export
ls reports/multiqc_data/
# multiqc_fastqc.txt, multiqc_samtools_stats.txt, ...

# Extract general stats as pandas DataFrame
python3 - << 'EOF'
import json
import pandas as pd
with open("reports/multiqc_data/multiqc_general_stats.json") as f:
    data = json.load(f)
df = pd.DataFrame(data).T
print(df.head())
print(f"Shape: {df.shape}")
EOF

Step 6: Automate in Pipeline Scripts

Integrate MultiQC as the final step of any QC pipeline.

#!/bin/bash
# Complete RNA-seq QC pipeline → MultiQC summary
SAMPLES=(ctrl_rep1 ctrl_rep2 treat_rep1 treat_rep2)
OUTDIR="pipeline_output"
mkdir -p $OUTDIR/{fastqc,star,featurecounts,flagstat}

for sample in "${SAMPLES[@]}"; do
    # FastQC
    fastqc data/${sample}.fastq.gz -o $OUTDIR/fastqc/ -t 4
    # STAR alignment
    STAR --runThreadN 8 --genomeDir refs/star_index \
         --readFilesIn data/${sample}.fastq.gz \
         --outSAMtype BAM SortedByCoordinate \
         --outFileNamePrefix $OUTDIR/star/${sample}/
    # samtools flagstat
    samtools flagstat $OUTDIR/star/${sample}/Aligned.sortedByCoord.out.bam \
        > $OUTDIR/flagstat/${sample}.flagstat
done

# Final MultiQC report
multiqc $OUTDIR/ -o $OUTDIR/qc_report/ -n "full_pipeline_qc"
echo "Report ready: $OUTDIR/qc_report/full_pipeline_qc.html"

Key Parameters

Parameter	Default	Range/Options	Effect
-o, --outdir	.	directory path	Output directory for report and data
-n, --filename	multiqc_report	any string	Report filename (without extension)
-m, --module	all	tool name	Run only specified module(s)
--ignore	—	glob pattern	Ignore matching files or directories
--export	False	flag	Export flat tab-delimited data files
--data-format	tsv	tsv, json, yaml	Format for exported data files
--config	auto-detected	YAML file path	Custom config file with thresholds and naming
--replace-names	—	regex, replacement	Clean sample names in report
--fn_clean_exts	(built-in)	list in config	File extensions to strip from sample names
--profile-runtime	False	flag	Show per-module runtime profiling

Common Recipes

Recipe: Add MultiQC to a Snakemake Pipeline

# In Snakefile: collect all QC outputs, then run MultiQC
rule multiqc:
    input:
        expand("qc/fastqc/{sample}_fastqc.zip", sample=SAMPLES),
        expand("qc/flagstat/{sample}.flagstat", sample=SAMPLES)
    output:
        html="reports/multiqc_report.html",
        data=directory("reports/multiqc_data")
    shell:
        "multiqc qc/ -o reports/ -n multiqc_report"

Recipe: Parse MultiQC Output in Python

import json
import pandas as pd

# Load general stats from JSON export
with open("reports/multiqc_data/multiqc_general_stats.json") as f:
    stats = json.load(f)

df = pd.DataFrame(stats).T
print(f"Samples: {len(df)}")
print(f"Metrics: {list(df.columns[:5])}")

# Flag samples with low mapping rate
if "STAR_mqc-generalstats-star-uniquely_mapped_percent" in df.columns:
    low_mapping = df[df["STAR_mqc-generalstats-star-uniquely_mapped_percent"] < 70]
    print(f"Samples with <70% mapping: {list(low_mapping.index)}")

Recipe: Compare QC Before and After Trimming

# Run FastQC on raw and trimmed reads, then combine in one report
mkdir -p qc/{raw,trimmed}

fastqc data/*.fastq.gz -o qc/raw/ -t 8
trim_galore data/*.fastq.gz --paired -o trimmed/
fastqc trimmed/*_trimmed.fastq.gz -o qc/trimmed/ -t 8

multiqc qc/raw/ qc/trimmed/ \
    -o reports/ -n raw_vs_trimmed \
    --dirs --dirs-depth 1  # use directory names in sample labels

Expected Outputs

Output	Format	Description
multiqc_report.html	HTML	Interactive report with all plots and tables
multiqc_data/multiqc_general_stats.txt	TSV	Per-sample summary statistics (all tools)
multiqc_data/multiqc_*.txt	TSV	Per-tool detailed statistics tables
multiqc_data/multiqc_data.json	JSON	Full data (if --data-format json)
multiqc_data/multiqc_sources.txt	TSV	Mapping of source files to samples

Troubleshooting

Problem	Cause	Solution
Empty report (no modules found)	QC files not in scanned directories	Specify directories explicitly: multiqc qc/ logs/ results/
Wrong sample names in report	File extensions or paths not cleaned	Add fn_clean_exts to config or use --replace-names
Module missing from report	Log file format changed in tool version	Update MultiQC: pip install --upgrade multiqc; check GitHub issues
Duplicate sample names	Multiple files map to same sample name	Use --sample-names or fix fn_clean_exts in config
Report very slow to open	Too many samples (>500) in one report	Split by project or condition; use --flat for simpler rendering
FastQC data not parsed	FastQC ZIP not in expected location	Run MultiQC from root of project; ensure *_fastqc.zip files exist
ModuleNotFoundError	Missing optional module dependencies	pip install multiqc[all] for all extras

References

• MultiQC documentation — official user guide and module list
• GitHub: ewels/MultiQC — source code and community modules
• Ewels et al. (2016) "MultiQC: summarize analysis results for multiple tools and samples in a single report" — Bioinformatics 32(19)
• MultiQC supported tools — full list of 150+ supported modules