agentsclimarketplace

Energy audit

Skill idfkit/idfkit-plugin/skills/energy-audit

Compare two EnergyPlus model variants to quantify energy savings from proposed changes (e.g., envelope upgrades, HVAC replacements, lighting retrofits)From its SKILL.md

Install
npx -y skills add idfkit/idfkit-plugin --skill energy-audit

Assembled from the repository path, not quoted from the project. Check it against their README if it does not work.

One thing to look at

  • 1 stars1 stars. Stars are a popularity signal and not a quality one, but at this level it is likely that nobody has read this closely except its author, and you would be relying on your own review.

SKILL.md

2.0 KB, as published. Nobody here has run it

Energy Audit — Baseline vs. Proposed Comparison

Compare models: $ARGUMENTS

Steps

  1. Load baseline — Use load_model to open the baseline (existing conditions) model. Read the idfkit://model/summary resource to document its configuration.

  2. Document baseline — Record key properties:

    • Envelope: wall/roof/window U-values and SHGC (inspect Construction and Material objects)
    • HVAC: system types and efficiencies
    • Lighting: power densities per zone
    • Schedules: occupancy and operating hours
    • Weather file and location
  3. Simulate baseline — Run run_simulation and read the idfkit://simulation/results resource. Use analyze_peak_loads for peak decomposition. Record:

    • Annual energy by end-use (heating, cooling, lighting, equipment, fans, pumps)
    • Peak heating and cooling loads with component breakdown
    • Unmet hours
  4. Load proposed — Clear session with clear_session, then load_model the proposed model. Read the idfkit://model/summary resource.

  5. Document changes — Compare key differences from baseline:

    • What was changed (insulation, windows, HVAC equipment, controls, etc.)
    • Quantify the parameter changes
  6. Simulate proposed — Run run_simulation and read the idfkit://simulation/results resource. Use analyze_peak_loads.

  7. Compare and report:

    • Energy savings: kWh and % reduction by end-use category
    • Peak load reduction: kW reduction in heating/cooling peaks
    • Unmet hours: Ensure comfort is maintained
    • Cost implications: If utility rates are known, estimate annual savings
    • Simple payback: If measure costs are provided

Present results in a clear comparison table format.

Keep looking

Skills are one crate of 608,475. Ordering is by how many stacks a row turns up in, so the top of any crate is what has actually been picked rather than what has the most stars.