Intake

Intake

Turn a ticket reference into a planning-ready context brief before /flagrare:atdd-plan runs. The goal: every relevant fact is on the table and every ambiguity is resolved before a single line of implementation is planned.

---

Lock the goal first (anti-stall): do this before Step 0

Hard requirement. Before any other tool call, you (the executing model) MUST call /goal yourself, unless you were invoked through /flagrare:work-prep (see the skip rule below). This is not a suggestion to the user.

Why: intake's most common failure is stopping after it emits the context brief and never reaching the clarifying questions. Emitting a large artifact reads as "turn complete," and the only forcing function downstream (the AskUserQuestion call in Step 5) sits two steps past that natural stop. A /goal is a session-scoped Stop-hook: after every turn a fast evaluator checks your condition against the conversation and, if unmet, makes you continue instead of yielding. Set it before the brief exists, so it is already holding you in place when you emit it. (Grounded in docs/research/2026-06-11-claude-code-goal-anti-stall.md.)

Call /goal with a condition phrased as something your own output demonstrates, the evaluator cannot run tools or read files, it only judges what you have surfaced in the conversation:

The ticket and every referenced link have been read; a codebase-grounded context brief has been produced (with ## Codebase Findings populated); the 3-5 most blocking clarifying questions have been asked via the AskUserQuestion tool and answered (or the brief had no blocking ambiguity and a short overview was presented instead); and either /flagrare:atdd-plan has been invoked with the brief as input, or the user has explicitly chosen "Stop here". Stop after 12 turns if not met.

After setting the goal, create a Todo list (TodoWrite), one item per remaining step (read ticket, follow references, synthesise brief, ground in codebase, ask questions, hand off). The todo list tracks coverage; the goal prevents the harness from letting you stop. Both are required.

Skip rule (nested under work-prep): if the args passed to this skill start with [work-prep], do NOT call /goal, /flagrare:work-prep already set a session-spanning goal, and only one goal can be active per session (a second would silently replace the first). Still create the Todo list.

If /goal is unavailable (it reports the workspace is untrusted, or disableAllHooks / allowManagedHooksOnly is set): proceed without it, but treat the no-yield notes in Steps 4-5 as mandatory rather than belt-and-suspenders.

---

Step 0: Inventory available tools

Before anything else, check what tools and MCPs are available in this session. List every MCP whose name contains any of: linear, jira, asana, shortcut, trello, notion, figma, drive, github, gitlab, confluence, browser, playwright, puppeteer, fetch, web, obsidian.

Build a capability map:

available MCPs:   [list every matched tool]
available CLIs:   run `which linear jira shortcut gh glab notion 2>/dev/null`, note which exist
browser tools:    [any MCP or tool that can load a URL with JS/auth, playwright, puppeteer, browser MCP]
file system:      [local Obsidian vault paths if known]

Use this map to pick the best tool for every fetch in Steps 2-3. A browser/automation MCP beats WebFetch for pages behind login. A first-party MCP beats a browser tool. An authenticated CLI beats an unauthenticated API call.

---

Step 1: Parse the input

Accept any of:

• A bare ticket ID: INT-42, ch12345, PROJ-99
• A full URL: https://linear.app/…, https://company.atlassian.net/…
• A plain-text description pasted inline, treat as the ticket body directly, skip Steps 2-3

Identify the platform:

Signal	Platform
linear.app URL or [A-Z]{2,}-[0-9]+	Linear
atlassian.net/jira URL	Jira
app.asana.com URL	Asana
app.shortcut.com URL or ch[0-9]+	Shortcut
trello.com URL	Trello

If the platform is ambiguous, ask before proceeding.

---

Step 2: Read the ticket

When to call directly vs. spawn a subagent: If the platform MCP is available in your session (e.g. you can call mcp__jira__getIssue yourself), call it directly -- there is no benefit to adding a subagent layer for a single tool call you already have access to. The subagent path exists for two cases: (1) the ticket has a large comment history that would bloat your context, or (2) the MCP is unavailable and the agent needs to walk a fallback chain (CLI, then WebFetch). Use judgement: small ticket + MCP available = call directly; large ticket or no MCP = subagent.

Direct path (when MCP is available)

Call the platform MCP tool directly. Extract: title, description, acceptance criteria, labels/tags, priority, assignee, linked issues, attached files, and every URL mentioned in the body or comments. Keep the raw structured output for Steps 3-4.

Subagent path (when MCP is unavailable or response would be very large)

Spawn a Ticket Reader subagent with model: "sonnet" and this brief:

Read the full ticket [ID/URL] and return: title, description, acceptance criteria, labels/tags, priority, assignee, linked issues, attached files, and every URL mentioned in the body or comments.

Use the best available tool in this order:

1. MCP tool for the platform (e.g. mcp__linear__getIssue, mcp__jira__getIssue, mcp__asana__getTask, mcp__shortcut__getStory)
2. Platform CLI (linear, jira, shortcut), check if available with which <cli>
3. WebFetch on the ticket URL directly

Return raw structured output. Do not summarise or interpret.

Wait for the subagent. If it returns an error (no MCP, no CLI, auth required), surface it and ask the user to paste the ticket body manually before continuing.

---

Step 3: Follow all references in parallel

Parse the ticket output for every linked resource. Spawn one Reference Reader subagent per resource, all in parallel, using model: "sonnet". Each subagent uses the best tool from the capability map built in Step 0:

Resource type	Preferred tool	Fallback
Another ticket (same or different platform)	Ticket Reader subagent (as in Step 2)	,
Notion page	mcp__notion__* MCP	Browser MCP → WebFetch
Figma file / frame	mcp__figma__* MCP	Browser MCP → WebFetch
GitHub PR / issue / file	gh CLI or mcp__github__*	WebFetch
GitLab MR / issue	glab CLI or mcp__gitlab__*	WebFetch
Google Drive / Docs	mcp__drive__* MCP	Browser MCP → WebFetch
Confluence page	mcp__confluence__* MCP	Browser MCP → WebFetch
Obsidian note	Read from local filesystem path	WebFetch if it is a published URL
Any other URL (articles, docs, specs, API refs)	Browser MCP (handles JS-heavy pages)	WebFetch

Pass each subagent the relevant section of the capability map so it knows what is available without re-discovering it.

Each Reference Reader subagent brief:

Fetch [URL / reference] and return the content most relevant to a software engineering planning session. Extract: key decisions, requirements, constraints, design specs, open questions. Summarise to ≤300 words, keep specifics (names, numbers, states) verbatim; cut filler.

Collect all results. If a resource is inaccessible (auth wall, 404, private), note it explicitly rather than silently skipping.

---

Step 4: Synthesise the context brief (without questions yet)

Merge ticket + all reference content into this structure:

Context Brief, [Ticket ID]: [Title]

Platform: [Linear / Jira / …]    Priority: [P0-P3 / Critical / …]    Assignee: [name]

## What
[1-3 sentences: what is being built or fixed]

## Why
[1-2 sentences: business or user motivation from ticket + linked docs]

## Acceptance Criteria
[Verbatim or lightly cleaned list. If absent, flag as ⚠ undefined, do not invent.]

## Constraints & Dependencies
[Technical constraints, blocked-by tickets, platform requirements, performance budgets]

## Referenced Material
[One line per followed reference: what it contributed]

## Codebase Findings
[Populated by Step 4.5 below, leave empty for now]

## Open Questions  (internal working list: NOT a deliverable)
[Everything underspecified, contradictory, or missing. These feed Step 5's AskUserQuestion call. Do NOT print them to the user as a prose list and then wait, listing them reads as "asked" and is the exact behaviour that stalls intake.]

Do not end your turn after emitting the brief. The brief is internal scaffolding, not a finished deliverable, continue straight into Step 4.5 in the same turn. Emitting the brief and stopping is this skill's single most common failure; the /goal set at the top exists to catch it, but do not rely on the goal alone.

---

Step 4.5: Ground the brief in the codebase

Before asking questions, see what the code actually says. Questions asked without codebase grounding are abstract; questions asked after exploration are specific and unblock real ambiguities ("the utility you'd want already exists at src/x.ts, extend it or replace it?").

When to skip

Skip codebase grounding when any of these is true:

• git rev-parse --show-toplevel fails, not in a repo
• The repo has no source files (docs-only, empty, pre-code project). Heuristic: git ls-files | grep -vE '\.(md|txt|json|ya?ml|toml|gitignore|cff)$' | head -1 returns nothing
• The user explicitly says "skip exploration" / "rough intake only"
• The ticket is purely process (e.g. [INFRA] rotate AWS keys) and exploration adds no value

Otherwise

Invoke /flagrare:codebase-explore with the ## What section as input plus a one-paragraph summary derived from the brief. Capture the returned findings -- file paths with line numbers, existing utilities, prior branches/PRs, related patterns.

Hard requirement: use the skill, not a substitute. Do not replace this with a generic Explore agent or manual grep commands. /flagrare:codebase-explore encodes a specific methodology (prior-branch check, convention mapping, utility inventory, dependency tracing) and produces output in the structure that /flagrare:atdd-plan expects downstream. A custom Explore prompt may cover similar ground but skips steps and produces findings in an unpredictable shape, which degrades plan quality.

Populate the brief's ## Codebase Findings section with the most planning-relevant items (≤8 bullets, full exploration output is fine for the consuming skill but the brief stays scannable).

If the exploration surfaces new ambiguities (e.g., "two utilities do similar things, which is canonical?"), add them to ## Open Questions.

---

Step 5: Ask codebase-informed clarifying questions

From Open Questions, select the 3-5 most blocking: things that, if unanswered, would force the plan to make assumptions or revisit scope mid-build.

Now that the brief is codebase-grounded, prefer concrete questions over abstract ones:

• "I see src/billing/quote.ts:84 already handles the discount math, should the new flow extend it or fork it?" (not: "where should the discount logic live?")
• "The Figma spec shows a 3-step wizard but src/onboarding/wizard.tsx is currently 2 steps, adapt the existing component or build new?"
• "INT-41 (which this depends on) is not merged yet, plan against current API or the incoming one in branch feat/int-41?"

Do not ask about things inferable from the ticket. Do not ask for information already in the brief or codebase findings.

How to ask: use the AskUserQuestion tool, never freeform narration

REQUIRED: when you have blocking questions, ask them via the AskUserQuestion tool, not as prose. Freeform "I'd like to confirm X..." text leaves the user without a clear answering surface and frequently results in the model stopping with no answer received.

Batch all 3-5 questions into a single AskUserQuestion invocation. For each question, supply 2-4 distinct options when the choice is genuinely bounded (e.g., "extend the existing utility / fork it / wrap it / replace it"). Open-ended judgement calls without obvious options should be phrased as a question with one most-likely option plus alternatives.

After the user answers, fold answers into the brief and clear Open Questions before proceeding to Step 6.

If there are no blocking questions

If the codebase-grounded brief is complete and no blocking ambiguity remains, do not silently proceed. Present a short overview to the user, 4-6 lines summarising what the ticket is, what the code currently does in that area, and what the plan will most likely need to build, and then explicitly prompt for the next step (see Step 6).

---

Step 6: Present overview and prompt for next step

Once the brief is complete (Open Questions resolved, or explicitly deferred by the user), always end intake with a tool-driven next-step prompt: exactly like plan mode ends with an accept/reject tool, not prose.

Present:

1. Overview: 4-6 lines: what the ticket is, the codebase context the plan will work within, and what's now resolved. Skip if the user just answered clarifying questions (they have the context fresh; don't repeat it).

2. Next-step prompt: issue an AskUserQuestion tool call. This is the same interaction shape as plan-mode's accept-plan tool: the user gets a discrete set of buttons, picks one, and the flow continues without freeform typing. Do NOT phrase this as a prose question, that produces ambiguity and frequently ends the turn with no answer captured.

   Intake's natural successor is /flagrare:atdd-plan. The brief is built specifically to be planning input, so the prompt is a simple two-way:

   • Proceed to /flagrare:atdd-plan (Recommended): pass the brief as opening context. The plan skill runs its own /flagrare:codebase-explore pass; intake's findings are additive input.
   • Stop here: return control to the user with the brief saved/printed for later use.

   Do NOT offer /flagrare:ticket-creator or /flagrare:tdd-writer here, those run before intake in different workflows (decomposing specs into tickets, drafting design docs for new multi-week projects). They are not downstream of a single-ticket intake.

If invoked through /flagrare:work-prep, skip the prompt and proceed directly to /flagrare:atdd-plan, work-prep already decided the next step. Detect this by checking whether the args passed to this skill started with [work-prep]. If so, do NOT issue an AskUserQuestion, instead, immediately invoke /flagrare:atdd-plan via the Skill tool, passing the complete context brief as the args parameter.

Never end intake with a context dump and silence. The user should always know what happens next and have a button to direct it, same UX contract as the plan-mode accept tool.

---

Anti-patterns

• Don't skip the /goal step (unless nested under /flagrare:work-prep, which owns the goal). Without a durable goal, intake reliably stalls after the brief and never asks the clarifying questions, the exact failure this skill is built to avoid.
• Don't set a second /goal when invoked with the [work-prep] prefix. Only one goal can be active per session; a second silently replaces work-prep's session-spanning goal and breaks the downstream handoff.
• Don't summarise the ticket without reading it, "I assume this means X" is not intake.
• Don't spawn a subagent per sentence, one per distinct resource (ticket, Notion page, Figma frame, article).
• Don't skip inaccessible references silently, note them, they may be critical.
• Don't ask more than 5 clarifying questions, prioritise the blockers; defer the rest to /flagrare:atdd-plan's gap review.
• Don't proceed to /flagrare:atdd-plan if Acceptance Criteria are still ⚠ undefined, resolve them first.
• Don't invent acceptance criteria to fill the gap, flag the absence and ask.
• Don't ask clarifying questions as prose. Use the AskUserQuestion tool with options. Prose questions cause the turn to end with no answer captured.
• Don't end intake with a context dump and silence. Always close with a tool-driven next-step prompt, same UX contract as plan mode's accept tool. The user must have a button, not a typing prompt.

---

Flow position

/flagrare:intake [ticket ID or URL]
     ↓ /goal locked (anti-stall; skipped when nested under work-prep)
     ↓ subagents read ticket + all references in parallel
     ↓ /flagrare:research-catalog  ← log every external source before synthesising
     ↓ context brief synthesised (without questions)
     ↓ /flagrare:codebase-explore  ← ground the brief in actual code
     ↓ codebase-informed clarifying questions answered
     ↓
/flagrare:atdd-plan  ← receives the codebase-grounded context brief
     ↓ /flagrare:codebase-explore  ← runs its own thorough pass (stays standalone-callable)
     ↓ ATDD plan produced
     ↓
[implementation]
     ↓
/flagrare:staleness-audit
     ↓
/flagrare:implementation-review
     ↓
git commit
     ↓
/flagrare:release-check