Roadmap management

roadmap-manager

When to use

Use this skill when:

• Creating a new roadmap (/roadmap:create command)
• Executing a roadmap (/roadmap:process-step|phase|full commands)
• Checking roadmap progress
• Updating roadmap status after completing work

Do NOT use when:

• Small tasks that don't span multiple steps
• One-off questions or fixes

⚠ Dashboard sync — non-negotiable

agents/roadmaps-progress.md is auto-generated and must reflect the live state in real time. After any checkbox edit ([x], [~], [-], [ ]) or phase add/rename/remove in a roadmap file, regenerate the dashboard in the same response.

Completion = archival. If an edit takes a roadmap to count_open == 0 (pure [x], or [x] + [~]/[-]), git mv it into agents/roadmaps/archive/ before regenerating — see the auto-archive decision table under "Check completion status" below. A 100%-complete roadmap left in agents/roadmaps/ makes the next reader think work is still open.

This is enforced by the roadmap-progress-sync rule. Batching multiple edits in one response is fine — one final regeneration before replying is enough. But the response must not end without it.

Archival — preferred sweep, untracked-safe manual fallback

The robust path is the archive_completed_roadmaps --all sweep: it detects a completed roadmap (count_open == 0, count_deferred == 0), moves it to agents/roadmaps/archive/ — git mv in a tracked repo, a plain mv in a pre-first-commit / untracked one — rewrites inbound refs, and regenerates the dashboard. It is PR-independent: it does not need /create-pr to have run.

Manual fallback — script-less consumer (the sweep is not vendored). Do it by hand, in the same response, and never leave a 100 %-complete roadmap in the active tree because git mv failed:

1. mkdir -p agents/roadmaps/archive.
2. Move the file — git mv agents/roadmaps/<x>.md agents/roadmaps/archive/<x>.md in a tracked repo; a plain mv if the file is untracked or the repo has no commits (git mv errors there).
3. Rewrite inbound full-path references agents/roadmaps/<x>.md → agents/roadmaps/archive/<x>.md across the tree — on the working tree, not just the git index, when untracked.
4. Regenerate agents/roadmaps-progress.md.

Procedure: Manage a roadmap

1. Identify need — Is this a multi-step change that spans sessions or agents?
2. Create or locate — Create new roadmap in agents/roadmaps/ or find existing one.
3. Update progress — Mark completed steps with [x], add notes for blockers, then regenerate the dashboard in the same response (enforced by roadmap-progress-sync).
4. Verify — Confirm all steps reflect current state, no stale information.

A roadmap is a structured .md file in agents/roadmaps/ that describes a multi-step change (refactoring, feature, migration). It ensures work can be picked up across sessions and by different agents.

Roadmap locations

Location	Scope
agents/roadmaps/	Project-wide roadmaps
{module_root}/{Module}/{agent_folder}/roadmaps/	Module-specific roadmaps (see note)
{package-root}/agents/roadmaps/	Package-specific roadmaps

Module path resolution. {module_root} and {agent_folder} come from modules.root_paths and modules.agent_folder in .agent-project-settings.yml — see layered-settings. Common shapes:

• Laravel — app/Modules/{Module}/agents/roadmaps/
• Symfony bundles — src/Bundle/{Bundle}/agents/roadmaps/
• Node / Python / Go monorepo packages — packages/{Pkg}/agents/roadmaps/

Use scripts/_lib/agent_settings.ts::enumerate_modules() to discover the actual paths in the current project; never assume app/Modules/.

The file .augment/templates/roadmaps.md defines the canonical structure. Always read it first before creating or modifying roadmaps.

Roadmap structure

Every roadmap follows this structure:

# Roadmap: {Short descriptive title}

> {One sentence: What is the expected outcome?}

## Prerequisites

- [ ] Read `AGENTS.md` and relevant docs
- [ ] {specific prerequisites}

## Context

{Why this roadmap exists. Which module/domain. Links to Jira tickets.}

## Phase 1: {Phase name}

- [ ] **Step 1:** {Clear, actionable instruction}
- [ ] **Step 2:** {Next step — reference files/classes}
- [ ] ...

## Phase 2: {Phase name}

- [ ] **Step 1:** {description}
- [ ] ...

## Acceptance Criteria

- [ ] {Observable, testable criterion}
- [ ] All quality gates pass — the project's type-checker, auto-fixer, linter, and full test suite (see the `quality-tools` skill for stack-specific invocations)

## Notes

{Edge cases, decisions, links}

Key rules for roadmaps

Checkboxes — mandatory, not decorative

• Every active roadmap MUST contain at least one - [ ] per non-intro phase. Decision tables, ICE matrices, and block-sequencing tables are valid rationale, but they do not satisfy this rule on their own — pair them with a ## Phase N or ## Implementation Checklist section whose checkboxes execute the decision. A roadmap without checkboxes is invisible to agents/roadmaps-progress.md and violates roadmap-progress-sync Iron Law #2.
• Every actionable step uses - [ ] (unchecked) or - [x] (completed).
• Mark steps as [x] immediately after completing them.
• Never remove completed steps — they serve as history.
• Status is binary: ready (default, implicit) or draft. New roadmaps are created ready unless the user explicitly says otherwise — ready is implicit and need not be written. A roadmap that is still being authored, awaiting upstream decisions, or capturing options without a worked plan declares status: draft in YAML frontmatter at the top of the file. Drafts are hidden from agents/roadmaps-progress.md until the flag is removed or flipped to ready. There are no other status values; legacy banners (**Status: directional**, Status: capture-only, mode: feedback) are removed.

Phases

• Group related steps into phases (e.g. "Preparation", "Migration", "Cleanup").
• Complete one phase before starting the next (unless steps are independent).
• After completing a phase, summarize what was done.

Quality gates

Every roadmap implicitly includes the project's quality pipeline (static analysis, autofixes, tests). Whether the agent runs it locally at all is gated by quality.local_auto_run: false or missing (the default) → the agent never runs the pipeline locally; the user runs it manually and remote CI on the PR is the authoritative gate (run-end report: "quality gates delegated to remote CI"; new-gate carve-out steps still run once). When local_auto_run: true, when the pipeline runs during /roadmap:process-step|phase|full is controlled by roadmap.quality_cadence in .agent-settings.yml:

Cadence	Pipeline runs (local_auto_run: true only)	Trade-off
end_of_roadmap (default)	Once before archiving	Fastest, fewest tokens; errors compound across phases
per_phase	After every completed phase + final	Balanced; catches drift at phase boundaries
per_step	After every completed step + final	Legacy verbose; highest token cost

The default is end_of_roadmap because most steps are checkbox-only content edits and a final pipeline run is the cheapest way to satisfy verify-before-complete. Switch to per_phase for risky migrations or unfamiliar codebases.

Always-on, regardless of cadence:

• Step checkboxes flip [ ] → [x] and the dashboard regenerates same response (enforced by roadmap-progress-sync).
• Before any "roadmap complete" claim or archival, the pipeline runs fresh (enforced by verify-before-complete).

Step granularity

• Each step should be completable in one session (< 1 hour of work).
• If a step is too large, break it down into sub-steps.
• Steps should reference specific files/classes when possible.

Language

• Roadmap files are written in English (per project convention).
• Step descriptions should be precise and actionable, not vague.

Working with roadmaps

Creating a roadmap

1. Ask the user for goal, context-create, and phases.
2. Use the template structure from .augment/templates/roadmaps.md.
3. Review with the user iteratively until approved.
4. Branch & release questions — at most once, only if genuinely useful. Default: stay on the current branch, no version numbers in the roadmap. Only propose a separate branch when there is concrete, evidence-based reason (e.g. risky migration benefits from a spike). Never include release versions, deprecation dates, or git tags in the roadmap text. If the user declines, do not re-propose during /roadmap:process-*. Decline = silence. See scope-control.
5. Save with a kebab-case filename (e.g. optimize-webhook-jobs.md). Before writing, scan the entire roadmap namespace for a collision — active, archive/, skipped/, and nested subdirs — with find agents/roadmaps -type f -iname "<name>.md". If any hit comes back, stop and ask the user to rename, open the existing file, or abort. Never silently overwrite an archived or skipped roadmap. Detailed prompt in commands/roadmap/create.md step 6.
6. Regenerate the dashboard so the new roadmap is included.

Executing a roadmap

0. Read execution.mode from the roadmap frontmatter (autonomous | phase-checkpoints | interactive; absent = interactive). Under /roadmap:process-* the mode selects the interaction pattern via the run-start execution contract — see roadmap-execution-contract. The manual flow below describes interactive; under autonomous / phase-checkpoints step 4's per-step ask is replaced by the accepted contract. Mode never changes archival semantics — glyph counting, the closure decision table, and the Iron Law 3 deferred-resolution gate below apply identically in every mode.
1. Read the full roadmap.
2. Find the next unchecked step (- [ ]).
3. Summarize what needs to be done.
4. Ask the user before implementing (numbered options: implement / adjust / skip).
5. After implementation: mark [x], run quality gates, then regenerate the dashboard.
6. Move to the next step.

Resuming a roadmap

When picking up a roadmap in a new session:

1. Read the roadmap to understand the full context.
2. Check which steps are already completed ([x]).
3. Summarize progress to the user.
4. Continue from the next open step.

Completing, archiving & skipping a roadmap

Every roadmap ends in exactly one of four states:

State	Folder	Trigger
Active	agents/roadmaps/	Work in progress or planned and workable now
Archived	agents/roadmaps/archive/	Work was done (fully or partially) and no more work is planned
Skipped	agents/roadmaps/skipped/	Decision against pursuit — superseded, scope rejected, wrong direction. Typically 0 items [x]
Later	agents/roadmaps/later/	Open work remains but is blocked-for-later — gated on an external trigger or a decision, will resume when unblocked. Set frontmatter status: later + a Blocked until / Trigger resume line. Excluded from the dashboard and /roadmap:process-* (parked, not abandoned).

Active vs. Later — the test: can the agent make progress on this roadmap now, autonomously? If every open item is gated on something outside this roadmap (a real consumer repo, a benchmark re-open, host-model access, a kernel soak, a pruning track, a human decision), it is not active — move it to later/ with its resume condition. A blocked roadmap left in the active tree silently lies to the dashboard and to /roadmap:process-*, which will keep trying to execute it. The lint_roadmap_later_disposition guard enforces the placement↔status: later contract.

After the last step of a roadmap is done, check completion status:

1. Scan the file for all checkbox markers: - [x], - [ ], - [~], - [-].

2. Classify:

   • [x] = completed
   • [ ] = open (not done)
   • [~] = deferred (intentionally pushed out, may come back)
   • [-] = cancelled (individual item dropped)

3. Decision rule — count_open == 0 means the roadmap has no active work left. [x], [-] are final states. [~] deferred items block silent closure — they carry plans the user has not consented to drop (enforced by roadmap-progress-sync Iron Law 3).

   count_x	count_open	count_deferred	count_cancelled	Action
   ≥ 1	0	0	0	Auto-archive (silent) — pure completion
   ≥ 1	0	0	≥ 1	Auto-archive (silent) — done with explicit drops
   ≥ 1	0	≥ 1	≥ 0	STOP — Iron Law 3 flow. Surface deferred items, present follow-up options, wait. See step 4b.
   0	0	≥ 1	≥ 0	STOP — Iron Law 3 flow. Was this a scope-drop or deferred-to-later? Same options as 4b.
   0	0	0	≥ 1	Auto-skip (silent) — no work, all cancelled
   ≥ 0	≥ 1	≥ 0	≥ 0	Ask the user — open work remains (step 4a)

   Show on auto-move:

   • Archive: ✅ Roadmap archived → agents/roadmaps/archive/{filename}
   • Skip: ⏭️ Roadmap skipped → agents/roadmaps/skipped/{filename}
   • Later: 🕒 Roadmap parked for later → agents/roadmaps/later/{filename}

   [-] cancelled items remain searchable inside the archived file — they were explicit drops. [~] deferred items, by contrast, may not silently follow the file into archive: they represent work the user planned and would lose track of. Step 4b is the gate.

4a. Open items remain (count_open ≥ 1) → Ask the user. Show what's incomplete:

📋 Roadmap completion check:

  ✅  Completed: {count_x}
  ⬜  Open:      {count_open}  — {list of open items, 1 line each}
  ⏭️  Deferred:  {count_deferred}  — {list of deferred items, 1 line each}
  ❌  Cancelled: {count_cancelled} — {list of cancelled items, 1 line each}

> 1. Archive — mark open items as cancelled [-] and archive now
> 2. Keep active — I want to finish the open items
> 3. Mark open items as deferred [~] and archive (triggers Iron Law 3 flow)
> 4. Skip — move to skipped/ (no meaningful work done, not pursuing)
> 5. Later — park in later/ (open work is blocked on an external trigger / decision but will resume)

Option 4 is only appropriate when count_x == 0 or the completed items were trivial (e.g. prerequisites only). If the user picks 4 despite meaningful work being done, confirm once — archive is usually the right choice. Picking option 3 does NOT archive immediately — it converts open → deferred and re-enters the count_deferred > 0 branch, which runs step 4b.

Option 5 (Later) is the right choice when the open items are real but cannot proceed now — gated on an external trigger or a decision. Set the roadmap's frontmatter status: later, ensure it carries a Blocked until / Trigger resume line, git mv it to agents/roadmaps/later/, migrate any inbound references to the new path, and regenerate the dashboard. The open [ ] items stay open (they are not cancelled or deferred) — the roadmap is parked whole, ready to resume when the trigger fires. Roadmaps with open tasks deferred for later are always moved to later/, never left to rot in the active tree.

4b. Deferred items present (count_deferred ≥ 1, count_open == 0) — Iron Law 3 flow. The archive is blocked until the user resolves the deferrals. Surface the plan and ask:

📋 Roadmap closure check — deferred items must resolve before archive:

  ✅  Completed: {count_x}
  ⏭️  Deferred:  {count_deferred}
  {for each deferred item:}
    - Phase {N}: {step text}  {<!-- deferred: <annotation> --> if present}

These items carry plans you would lose to a silent archive.

> 1. Spawn follow-up roadmap as DRAFT
>    → agents/roadmaps/road-to-{auto-slug}.md, status: draft,
>      parent_roadmap: {this-slug}. Hidden from the dashboard until
>      you flip status to "ready".
> 2. Spawn follow-up roadmap as READY (with blocked-until note)
>    → status: ready (default), parent_roadmap: {this-slug}, plus
>      a `> Blocked until <condition>` line in the body. Visible
>      in the dashboard; execution waits on the condition.
> 3. Keep deferred items in this archive — confirm "no follow-up"
>    is an intentional drop. Items stay searchable in archive/.
> 4. Restore selected items to [ ] — finish them here before archive.
> 5. Convert selected items to [-] cancelled — drop with rationale.

Picks 1 or 2 → see "Spawn follow-up from deferred items" procedure below. Picks 3, 4, or 5 → apply the change in this roadmap; re-evaluate the decision table; archive when the gate clears.

Spawn follow-up from deferred items (procedure)

When the user picks option 1 or 2 in step 4b:

1. Derive the slug. Default <parent-slug>-followup (e.g. road-to-x.md → road-to-x-followup.md). If a user-supplied slug was given in the picker, use that. Avoid collisions with agents/roadmaps/ (active + archive/ + skipped/).

2. Write the new file at agents/roadmaps/<slug>.md:

   ---
   complexity: lightweight            # bump if the parent was structural
   status: draft                      # option 1; omit for option 2 (= ready)
   parent_roadmap: <parent-slug>      # back-link to source
   ---
   
   # Roadmap: Follow-up to <parent-title>
   
   > <One sentence stating the carried-over outcome.>
   
   ## Context
   
   This roadmap collects items deferred from
   [`agents/roadmaps/archive/<parent-slug>.md`](archive/<parent-slug>.md).
   See the parent's archive entry for the original rationale.
   
   ## Prerequisites
   
   - [ ] Read `AGENTS.md` and the parent archive entry.
   {parent prerequisites still relevant, copied verbatim}
   
   <!-- Option 2 only — body note, NOT a frontmatter key: -->
   > Blocked until <condition>. Execution starts when the condition clears.
   
   ## Phase 1: <name carried from parent>
   
   - [ ] {deferred step text, copied verbatim with parent-phase pointer}
   {repeat per deferred item, regrouped by parent phase}
   
   ## Acceptance Criteria
   
   - [ ] {restate or adjust per the deferred scope}
   - [ ] All quality gates pass — see `quality-tools`.
   

3. In the parent roadmap (still in the working tree), append a line at the bottom (above any final ---):

   <!-- Deferred items migrated to agents/roadmaps/<followup-slug>.md on YYYY-MM-DD -->
   

   Do not delete the [~] lines — keep them visible in the archived parent so the trail stays grep-able. The follow-up carries forward the executable copy.

4. Regenerate the dashboard. The follow-up appears (draft hidden, ready visible) and the parent — once moved — drops off.

5. Archive the parent (git mv → archive/) and regen one more time per roadmap-progress-sync Iron Laws 1 + 3.

6. Move the file with git mv so history is preserved:

   # Archive (work was done)
   git mv agents/roadmaps/{file} agents/roadmaps/archive/{file}
   
   # Skipped (not pursuing)
   git mv agents/roadmaps/{file} agents/roadmaps/skipped/{file}
   

7. Regenerate the dashboard (see "Command" below). The moved roadmap is excluded from the active set once it sits in archive/ or skipped/.

When to use skipped/ vs archive/

Situation	Destination
Finished all phases	archive/
Finished some phases, rest deferred/cancelled on purpose	archive/
Whole roadmap deferred or cancelled (no [x] at all)	skipped/
Never started, scope decision reversed	skipped/
Superseded by another roadmap	skipped/ — add a pointer line at the top: > Superseded by agents/roadmaps/{other}.md
Research proved the direction wrong	skipped/ — add a 1-line reason at the top

If in doubt: archive beats skipped. skipped/ is reserved for roadmaps where no meaningful work was invested and the scope itself was rejected.

Progress dashboard — agents/roadmaps-progress.md

A generated dashboard aggregates progress across every open roadmap. It sits at agents/roadmaps-progress.md (outside roadmaps/ to keep the folder clean) and is rewritten by .augment/scripts/update_roadmap_progress.ts.

Always regenerate in the SAME response after any of the following (enforced by roadmap-progress-sync):

• Creating a new roadmap (/roadmap:create)
• Marking a step [x], [~], or [-] during /roadmap:process-*
• Archiving or moving a roadmap to skipped/
• Adding, renaming, or removing a phase

Command:

./agent-config roadmap:progress           # rewrite the dashboard
./agent-config roadmap:progress-check     # CI: fail if stale

The ./agent-config wrapper lives in the project root (written by the package installer, gitignored) and delegates to the master CLI inside node_modules/@event4u/agent-config/ or vendor/event4u/agent-config/. No global tooling required.

The dashboard is a read-only snapshot. Do not edit it by hand — regenerate it.

Blockers on the dashboard

The overview table's Blocker column counts each roadmap's open ## Blockers entries (or the legacy > Blocked until note) and links to the per-roadmap breakdown, which lists every open blocker with owner, blocked scope, and full instructions. Authoring shape: templates/roadmaps.md rule 20; authoring guidance: roadmap-writing § 5b. Clearing a blocker flips its Status: resolved and regenerates the dashboard in the same reply, same cadence as a checkbox flip.

Rubric pass (optional, surfacing-only)

After producing a roadmap, run judge-artifact-completeness with rubric roadmap-score to surface missing dimensions (risk, tests per step, migration, maintainability). The score is a recommendation; it never blocks the roadmap from shipping. Invoke only when the user wants a completeness check — not on every roadmap creation by default.

Output format

1. Roadmap file in agents/roadmaps/ with ordered phases and tasks
2. Progress tracking with checkbox status
3. agents/roadmaps-progress.md regenerated on every change

Auto-trigger keywords

• roadmap
• roadmap creation
• phase tracking
• step completion

Gotcha

• Roadmap files go in agents/roadmaps/ — don't create them in other directories.
• Don't mark phases complete without running verification (tests, quality checks) — the verify-before-complete rule applies.
• The model tends to skip phases it deems "simple" — every phase must be explicitly completed.
• Auto-archive is allowed when count_open == 0 AND count_deferred == 0. [-] cancelled items archive silently (explicit drops). [~] deferred items block silent archive — they trigger the Iron Law 3 flow (see step 4b).
• archive/ and skipped/ are distinct — archive/ = work happened, skipped/ = no meaningful work, not pursuing. Create either directory if it doesn't exist.
• Use git mv (not mv) so history follows the file.

Do NOT

• Do NOT skip quality gates between steps.
• Do NOT mark steps as done without actually completing them.
• Do NOT modify completed steps (only add notes if needed).
• Do NOT create roadmaps for trivial changes (single-file fixes don't need a roadmap).
• Do NOT commit or push — only local changes.
• Do NOT archive roadmaps with open [ ] items without asking the user.
• Do NOT delete roadmaps — always move to archive/ or skipped/.
• Do NOT use skipped/ as a dumping ground for partially-finished work — that is what archive/ with deferred items is for.
• Do NOT assign version numbers, git tags, deprecation dates, or release identifiers to phases. Roadmaps plan work; releases and tags are decided by the user separately. Hard rule — see scope-control.
• Do NOT propose a branch switch while executing a roadmap. The branch question is settled at creation time; if the user already declined (or you never asked because it wasn't sensible), stay silent. See scope-control.