Prime

/mf:prime — prime a project for the mindfunnel workflow

Set up the current project's root with a small committed agent-entry-point so that every contributor — with or without the mindfunnel plugin installed — sees a clean project-scoped AGENTS.md on clone:

• AGENTS.md — project-scoped stub (copied from templates/project-AGENTS.md), real file, committed. Maintainers extend it per-project as the project grows.
• CLAUDE.md — intra-repo symlink to ./AGENTS.md, committed. Explicit Claude Code compatibility.
• PROJECT.md — real file, empty by default, committed. Holds project-specific deep context.

Nothing per-project points into ~/.mindfunnel/ anymore. The maintainer's user-global engineering style (~/.mindfunnel/AGENTS.md) is loaded independently via the ~/.claude/CLAUDE.md / ~/.codex/instructions.md symlinks that /mf:setup manages; it is not conflated with each project's AGENTS.md. Likewise, SOUL.md and USER.md are user-global files reached via ~/.claude/ and ~/.codex/ symlinks and are never stamped into a project.

Run once per project, from the project root. Idempotent: re-running after the upgrade cleans up legacy pre-0.3.0 symlinks and legacy .gitignore lines automatically.

Important

1. Run from the project root. The skill writes into the current working directory. Confirm with pwd before acting if there's any doubt.
2. Never overwrite a pre-existing regular file. A hand-authored ./AGENTS.md or ./CLAUDE.md always wins over the stub; leave it alone and flag in the report.
3. ~/.mindfunnel/ must already be set up. If it isn't, stop and tell the user to run /mf:setup first. (The stub template lives inside the plugin, not in ~/.mindfunnel/, but /mf:setup is still the prerequisite for the rest of the workflow.)
4. .gitignore edits are minimal, targeted, and one-way. /mf:prime strips AGENTS.md and CLAUDE.md lines from .gitignore if they're there (required — leaving them would prevent the new committed files from staging). It does not touch the legacy SOUL.md line (harmless, orthogonal to this change).

Instructions

Step 1: Verify ~/.mindfunnel/ is ready

[ -r "$HOME/.mindfunnel/AGENTS.md" ] && echo ready || echo missing

If missing, stop with:

~/.mindfunnel/ isn't set up yet. Run /mf:setup first, then re-run /mf:prime.

Do not proceed.

Step 2: Stamp ./AGENTS.md from the stub

For ./AGENTS.md in the cwd, classify and act:

• regular file (real content, possibly hand-authored) → leave alone. Do not overwrite under any circumstance. Flag in the report as "kept (existing hand-authored file)".
• legacy symlink pointing at ~/.mindfunnel/CLAUDE.md, ~/.mindfunnel/AGENTS.md, or local ./CLAUDE.md → remove the symlink, then copy the stub.
• absent → copy the stub.
• other symlink (pointing somewhere unknown) → leave alone, flag, ask the user whether to replace. Only proceed on an explicit yes.

Shell form for the happy path:

if [ -L AGENTS.md ]; then
    target="$(readlink AGENTS.md)"
    case "$target" in
        "$HOME/.mindfunnel/CLAUDE.md"|"$HOME/.mindfunnel/AGENTS.md"|CLAUDE.md)
            rm -f AGENTS.md
            ;;
    esac
fi

if [ ! -e AGENTS.md ]; then
    cp "${CLAUDE_PLUGIN_ROOT}/templates/project-AGENTS.md" AGENTS.md
fi

Step 3: Create the project-local CLAUDE.md symlink

CLAUDE.md is kept as an intra-repo symlink to ./AGENTS.md for explicit Claude Code compatibility. The symlink is project-local (no user-path dependency), so git tracks it fine and every clone sees the same two-name alias.

• absent → ln -s AGENTS.md CLAUDE.md.
• correct local symlink (readlink CLAUDE.md == AGENTS.md) → no-op.
• legacy symlink pointing at ~/.mindfunnel/CLAUDE.md or ~/.mindfunnel/AGENTS.md → remove, then create the local symlink.
• regular file (hand-authored) → leave alone. Flag in the report.
• other symlink → leave alone, flag, ask before replacing.

if [ -L CLAUDE.md ]; then
    target="$(readlink CLAUDE.md)"
    case "$target" in
        AGENTS.md)                              ;;  # already correct
        "$HOME/.mindfunnel/CLAUDE.md"|"$HOME/.mindfunnel/AGENTS.md")
            rm -f CLAUDE.md
            ln -s AGENTS.md CLAUDE.md
            ;;
    esac
elif [ -e CLAUDE.md ]; then
    :   # hand-authored regular file — leave alone
else
    ln -s AGENTS.md CLAUDE.md
fi

Step 4: Clean up a legacy ./SOUL.md symlink

Earlier versions of /mf:prime (≤ 0.2.2) created ./SOUL.md as a symlink to ~/.mindfunnel/SOUL.md. Starting with 0.3.0, SOUL.md is user-global only (reachable via ~/.claude/SOUL.md and ~/.codex/SOUL.md, managed by /mf:setup) and should not live in the project root.

Remove the legacy symlink automatically — but only if it's exactly that known-safe symlink:

if [ -L SOUL.md ] && [ "$(readlink SOUL.md)" = "$HOME/.mindfunnel/SOUL.md" ]; then
    rm -f SOUL.md
    echo "Removed legacy SOUL.md symlink (pre-0.3.0 prime leftover)"
fi

Rules:

• If ./SOUL.md is a real file — leave alone. The user authored it.
• If ./SOUL.md is a symlink to somewhere other than ~/.mindfunnel/SOUL.md — leave alone. Unknown target, unknown intent.
• If ./SOUL.md is absent — no-op.

Step 5: Touch PROJECT.md if absent

[ -e PROJECT.md ] || touch PROJECT.md

Never overwrite an existing PROJECT.md. If the project already has one, leave it alone.

Step 6: Strip legacy AGENTS.md / CLAUDE.md entries from .gitignore

Earlier primings (≤ 0.2.x) added AGENTS.md and CLAUDE.md to the project's .gitignore because they used to be per-user symlinks. Under the new model they're committed files; those lines would prevent them from staging, so strip them.

This is the one and only forced .gitignore edit in /mf:prime and it exists to make the new model function.

if [ -f .gitignore ] && git rev-parse --git-dir >/dev/null 2>&1; then
    for f in AGENTS.md CLAUDE.md; do
        if grep -qx "$f" .gitignore; then
            # Strip the exact-match line in place.
            tmp="$(mktemp)"
            grep -vx "$f" .gitignore > "$tmp" && mv "$tmp" .gitignore
            echo "Removed $f from .gitignore (now committed under the new model)"
        fi
    done
fi

Leaves the SOUL.md line alone. It's harmless (guards against a future hand-authored project-local SOUL.md being committed by accident) and orthogonal to this change.

Note: this step only strips exact-match lines. It does not touch pattern entries (e.g. *.md, AGENTS.*) or lines with comments / trailing whitespace. If someone hand-edited the gitignore in a non-standard way, the line stays and the user can clean it up.

This step does not git rm --cached anything. If the project previously committed AGENTS.md or CLAUDE.md as broken symlinks (see troubleshooting below for the < 0.2.2 state), that's still the user's problem to untrack — a destructive history op.

Step 7: Report

Emit a short summary, ≤ 10 lines. For each file / action:

• AGENTS.md — created from stub / kept (existing file) / replaced legacy symlink
• CLAUDE.md — created / already correct / repointed from legacy / kept (hand-authored)
• SOUL.md — removed legacy symlink / absent (no-op)
• PROJECT.md — created empty / already present
• .gitignore — stripped AGENTS.md + CLAUDE.md / nothing to strip

Skip lines that resolved to no-op.

Examples

Example 1: Clean project, first prime

AGENTS.md   created from stub
CLAUDE.md   created → AGENTS.md
PROJECT.md  created (empty)

Example 2: Project already primed under 0.3.0, re-run

AGENTS.md   kept (existing file)
CLAUDE.md   already correct
PROJECT.md  present
Nothing to do.

Example 3: Project primed under ≤ 0.2.2, re-run after upgrade

AGENTS.md   replaced legacy symlink with stub
CLAUDE.md   repointed from ~/.mindfunnel/CLAUDE.md → AGENTS.md
SOUL.md     removed legacy symlink (pre-0.3.0)
PROJECT.md  present
.gitignore  stripped AGENTS.md, CLAUDE.md (now committed; SOUL.md line left alone)

Example 4: Project has a hand-authored AGENTS.md

AGENTS.md   kept (existing hand-authored file, 2.3 KB)
CLAUDE.md   created → AGENTS.md
PROJECT.md  present
.gitignore  stripped AGENTS.md, CLAUDE.md

The hand-authored AGENTS.md stays; the user gets to commit it under the new model.

Troubleshooting

Error: "~/.mindfunnel/ isn't set up"

Run /mf:setup first. /mf:prime depends on the shared scaffolding existing (even though the stub it stamps lives inside the plugin, not in ~/.mindfunnel/).

Error: user accidentally said "yes" to replacing a real file

The old file is gone. Recover from git (git show HEAD:AGENTS.md > AGENTS.md) if possible. Otherwise, restore from backup or rewrite.

The project's AGENTS.md / CLAUDE.md is a symlink pointing somewhere unexpected

That's an unusual setup — probably a different convention the user is following. Ask, don't replace blindly. The user may want to keep the existing symlink.

Repo was primed under mindfunnel ≤ 0.2.1 and has CLAUDE.md / AGENTS.md committed as symlinks into ~/.mindfunnel/

Symptom: git ls-files shows CLAUDE.md and AGENTS.md tracked in a repo primed by a very old /mf:prime. Other clones on other machines see dangling symlinks because ~/.mindfunnel/ doesn't exist there.

Cause: Versions 0.2.0 and 0.2.1 of /mf:prime only added SOUL.md to .gitignore, so CLAUDE.md and AGENTS.md got committed as broken-elsewhere symlinks.

Solution (user-driven, never automated by /mf:prime):

# in each previously-primed project root, after upgrading to 0.3.0:
git rm --cached CLAUDE.md AGENTS.md     # untrack the broken symlinks (keeps the on-disk files)
/mf:prime                                # stamps real AGENTS.md + intra-repo CLAUDE.md symlink, strips .gitignore lines
git add AGENTS.md CLAUDE.md .gitignore   # stage the real files and the .gitignore diff
git commit -m "mindfunnel: move to 0.3.0 split AGENTS.md model"

git rm --cached is deliberately NOT automated — untracking already-committed files is a destructive operation on shared history and wants explicit user intent.

Anti-patterns

• Don't run from anywhere but the project root. Writes in the wrong cwd cause silent confusion later.
• Don't replace a pre-existing non-symlink AGENTS.md or CLAUDE.md without explicit approval. The user's hand-written file always wins over the stub.
• Don't create PROJECT.md with placeholder content. It's created empty on purpose; the user fills it in as the project develops. A non-empty default encourages copy-paste that never gets edited.
• Don't add anything new to .gitignore. /mf:prime only strips old entries under the new model; it never adds.
• Don't auto-remove the legacy SOUL.md line from .gitignore. It's harmless and touching a tracked file unprompted is out of scope beyond the forced AGENTS.md / CLAUDE.md cleanup.
• Don't git rm --cached already-committed symlinks during prime. That's a destructive operation on shared history — flag it, point the user at the troubleshooting entry, let them drive it.
• Don't auto-run /mf:setup if ~/.mindfunnel/ is missing. Ask the user; doing it silently hides the coupling.
• Don't create a project-root SOUL.md or USER.md. Those are user-global; /mf:setup manages them in ~/.claude/ and ~/.codex/. Stamping them per-project was the pre-0.3.0 behaviour for SOUL.md and is no longer correct — see Step 4 for the legacy cleanup.
• Don't symlink AGENTS.md into ~/.mindfunnel/. The maintainer's user-global engineering style is a separate file with a separate load path (~/.claude/CLAUDE.md); a project's AGENTS.md is a committed, project-scoped file owned by the project. Conflating them was the pre-0.3.0 design.