Statusline config

statusline-config — guided layout setup

You configure what the statusline shows by editing statusline_config.json. You set layout only: which lines exist, which element blocks appear, the usage display style, the context-gauge form, weather, and emoji_width.

You do NOT touch colors. The colors block is owned entirely by /statusline-theme. Leave colors exactly as you found it (preserve it byte-for-byte). If the user asks about colors/themes/palettes, tell them to run /statusline-theme and do not edit colors here.

Never present {peak_label} as an option — Anthropic removed peak-hour limits; it exists only for back-compat. Only emit placeholders from the list below. English only.

---

Step 1 — Locate the ACTIVE statusline and read its config

You edit the ACTIVE statusline — the one Claude Code is really running. That is usually the DEPLOYED copy (e.g. ~/.claude/statusline.py and ~/.claude/statusline_config.json), NOT the repo copy. Do not assume the repo. Resolve the active target with the shared helper that lives beside this file, statusline_io.py:

python statusline_io.py locate

(Run it with the absolute path to statusline_io.py in this skill's own directory; fall back to python3 if python is unavailable.) It prints a single JSON object:

{"statusline_py": <abs or null>, "config_path": <abs or null>,
 "settings_json": <path or null>, "launcher": <str or null>,
 "source": "pointer"|"settings"|"none",
 "pointer_path": <abs path where the pointer would live>,
 "notes": <short human string>}

Use config_path as the file you will write back to, and statusline_py as the renderer. Handle source as follows:

• pointer — a saved pointer resolved the target. Use it as-is.
• settings — resolved by parsing the active settings.json (statusLine.command). Use it, then OFFER to save a pointer so future runs are instant:

  python statusline_io.py save-pointer --statusline-py <statusline_py> --config <config_path> [--settings <settings_json>] [--launcher <launcher>]
  

• none — nothing resolvable. ASK the user where their statusline is installed (the path to the active statusline.py); the config is statusline_config.json beside it unless they set STATUSLINE_CONFIG. Then OFFER to save-pointer with those values.

Always make clear to the user that you are editing the ACTIVE (often deployed ~/.claude) config, not the repo copy. Never write to a directory the renderer will not read from.

Now read the resolved config_path. If it is missing or invalid JSON, note that you'll start from built-in defaults (the bar always renders even with no config). Then summarize what is currently active:

• Which templates keys start with line (those are ON, in order) vs _disabled_*/_* (those are OFF).
• Which element blocks each active line contains (session header / weather / git / usage / status incident indicator).
• Which usage style is in use, if any ({usage_bars}+{usage_resets} / {usage_micro} / {compact_usage_micro} / none).
• Which context-gauge form is in use ({ctx_micro} inline / bare {ctx_bar} / {ctx_bar:N} / just {ctx}/{ctx_percent}).
• emoji_width, and weather name + show_* flags.
• Whether a status block is present and whether any active line uses a status placeholder ({status}, {status:N}, {status_icon}, {status_header}).

---

Step 2 — Gather choices (use the AskUserQuestion tool)

Fast path first

Offer the user a choice up front:

• Start from a preset (recommended) — pick one of the four presets below, then optionally tweak.
• Customize (ask me everything) — go through the custom rounds.

Presets (mirror the repo's examples/):

Preset	Lines	What it shows
Minimal (1 line)	line1	model + context label/percent + inline ctx micro. No weather, no usage, no git.
Two-line (weather + compact usage)	line1, line2	sun + time + model + effort + ctx percent on line1; weather + {compact_usage_micro} on line2.
Three-line (context bar + git)	line1, line2, line3	header on line1; weather + big auto-aligned {ctx_bar} on line2; path/git/changes on line3.
Four-line (full usage)	line1..line4	header on line1; path/git on line2; {usage_bars} on line3; {usage_resets} on line4.

The exact preset templates are in the Preset templates section near the end of this file — copy them verbatim when a preset is chosen.

Custom rounds (only if the user picked "customize")

Ask in clear, separate rounds:

1. Element blocks (multiSelect): session header, weather, git, usage, status (incident indicator — zero-cost when nothing is active; the whole line is suppressed automatically).
2. Usage style (single select — pick at most ONE, never mix):
   • Full bars (2 lines) — {usage_bars} on one line, {usage_resets} on the next. Most detail; costs two lines.
   • Micro (1 line) — {usage_micro}: one line, full-word labels ("session 41%…").
   • Compact micro (1 line) — {compact_usage_micro}: one line, terse ("s 41%…w 63%…").
   • None — no usage segment.
3. Context gauge (single select):
   • Inline micro — append {ctx_micro} to line1 (tiny ▕<cell>▏).
   • Big auto-aligned bar — bare {ctx_bar} on its own line (see composition rule).
   • Fixed N-cell — {ctx_bar:N} (ask N, e.g. 28); sits anywhere.
   • Percent text only — just {ctx} and/or {ctx_percent}, no gauge.
4. Weather (only if weather chosen): ask the city (free text), then which parts to show (multiSelect over show_name, show_icon, show_temp, show_humidity, show_wind), then sun glyph on/off ({sun}).
5. Emoji width (single select): 2 (default; most terminals) or 1 (tip: choose 1 if emoji render single-width and the bar looks shifted).

---

Step 3 — Geocode the city (only if weather is ON)

Resolve the city name to coordinates via the Open-Meteo geocoding endpoint (this is separate from the forecast call statusline.py makes):

GET https://geocoding-api.open-meteo.com/v1/search?name=<CITY>&count=1&language=en&format=json

Read results[0]: use .latitude, .longitude, and .name (and .country to confirm). Write name/latitude/longitude into the weather block and confirm the resolved city + country with the user before composing. If geocoding returns no results, ask the user to refine the city name.

Do NOT ship a config that uses {weather}/{sun} without a geocoded weather block — if latitude/longitude are missing the renderer falls back to the default placeholder location (Newyork / 56.25 / -5.2833) and shows bogus weather.

---

Step 4 — Compose the templates

Build the active line1..lineN from the chosen modules using the Fragment recipes below, then enforce the composition rules.

Placeholders (the COMPLETE list — emit nothing else)

Color/format:  {c.NAME}  {r}
Session:       {time} {version} {model} {effort}
Context:       {ctx} {ctx_percent} {ctx_bar} {ctx_bar:N} {ctx_micro} {align_pad}
Tokens:        {total} {input} {output} {cached}
Usage gauges:  {usage_bars} {usage_resets} {usage_micro} {compact_usage_micro}
Path/git:      {path} {branch} {added} {removed}
Weather:       {weather} {sun}
Status:        {status} {status:N} {status_icon} {status_header}

{effort} renders like (high) or empty when unsupported. Do not use {peak_label}.

{status:N} caps the label+title at N characters (0 = unlimited), exactly like {ctx_bar:N}. All four status placeholders render empty (and suppress their whole line) when no incident is active — the RSS feed is fetched only when a rendered line actually uses one of them.

Fragment recipes (module → fragment)

Module	Fragment
session header	{sun} {c.time}[{time}]{r} {c.version}{version}{r} {c.model}{model}{r}{c.effort}{effort}{r} Ctx:{ctx} {c.ctx_percent}({ctx_percent}%){r}
inline ctx micro (append to header)	{ctx_micro}
weather line	{c.weather}{weather}{r}
git line	{c.path}{path}{r} {c.git_icon}(git)/{r}{c.branch}{branch}{r} ({c.output}+{added}{r},{c.input}-{removed}{r})
usage full (two lines)	line A = {usage_bars} ; line B = {usage_resets}
usage micro line	{usage_micro}
usage compact line	{compact_usage_micro}
weather + compact usage on one line	{c.weather}{weather}{r} {compact_usage_micro}
status indicator	{status} (or {status:N} to cap width)
status icon only	{status_icon}
status header banner	{status_header} — on its OWN line, ABOVE the line containing {status}; appears only when an incident is active

If the user chose the inline-micro gauge and no {sun} glyph, drop the leading {sun} from the header. Include {sun} only when the user opted into it.

Usage display styles (pick exactly ONE — never mix)

• (a) FULL BARS → two lines: {usage_bars} then {usage_resets}.
• (b) MICRO → one line: {usage_micro}.
• (c) COMPACT → one line: {compact_usage_micro}.
• or none.

A config must use at most one of these. Never combine (a)+(b), (b)+(c), etc.

Context-gauge forms (3) + composition rules

1. INLINE MICRO — append {ctx_micro} to line1.
2. BIG AUTO-ALIGNED {ctx_bar} — on its OWN line. It auto-sizes to align under the line1 segment that starts at {effort}. THEREFORE line1 MUST contain {effort}, and the bar line MUST include {align_pad} before the opening bracket:
   • without weather: {align_pad}{c.ctx_bracket}▐{r}{ctx_bar}{c.ctx_bracket}▌{r}
   • with weather: {c.weather}{weather}{r}{align_pad}{c.ctx_bracket}▐{r}{ctx_bar}{c.ctx_bracket}▌{r}
3. FIXED {ctx_bar:N} — fixed N cells, sits anywhere, no {align_pad}, e.g. {c.ctx_bracket}▐{r}{ctx_bar:28}{c.ctx_bracket}▌{r}
4. Just text — {ctx} and/or {ctx_percent}.

Line ordering and disabling

Order lines sensibly: header → weather/usage → git (gauge line usually right after the header). Assign active lines as line1, line2, … in display order.

Status incident lines follow a special rule: {status_header} MUST appear on its OWN line placed ABOVE the line that contains {status}. Both lines vanish together when no incident is active. The shipped config already contains a ready-to-enable pair — enable both by renaming them from _disabled_* to line* keys:

"_disabled_status_header": "{status_header}",
"_disabled_status_line":   "{status}"

Rename _disabled_status_header to line_status_header (or similar) and _disabled_status_line to line_status — or insert them as line2/line3 etc. in the display order. Never place {status_header} on the same line as {status}.

To turn OFF an existing line without deleting it, rename its key to _disabled_<name> (keys not starting with line are ignored). Preserve every existing _comment* key. Do NOT alter the colors block.

---

Step 5 — Show a unified DIFF

Present a unified diff of the old statusline_config.json vs the new one so the user sees exactly what changes (templates, weather, emoji_width). Confirm colors is unchanged.

---

Step 6 — Validate

Before rendering, check ALL of:

• JSON parses.
• Every {placeholder} used appears in the placeholder list above (no {peak_label}).
• emoji_width is 1 or 2.
• At least one active line (a key starting with line).
• Usage style is not mixed (at most one of full/micro/compact).
• Big-bar rule: if any line uses bare {ctx_bar}, then line1 contains {effort} and that bar line contains {align_pad}.
• If any active line uses {weather} or {sun}, the weather block has a geocoded name/latitude/longitude (not the default placeholder).
• If any active line uses {status}, {status:N}, {status_icon}, or {status_header}: no special config is required (the status block has sensible defaults and is optional); the RSS fetch happens only when these placeholders appear in a rendered line. If {status_header} is used, confirm it is on a separate line placed ABOVE the line containing {status}.
• colors block is byte-for-byte unchanged; _comment* keys preserved.

Fix any failure before proceeding.

---

Step 7 — Test-render with the sample input

Render the new config against assets/sample_input.json (bundled with this skill). Point STATUSLINE_CONFIG at a temp copy of the new config so the user's live file is untouched until they confirm — the live config is never written until Step 8's commit.

Use the statusline_py path you resolved in Step 1 (from the helper's locate JSON) wherever <statusline.py> appears below — the absolute path to the active renderer (the deployed copy, e.g. ~/.claude/statusline.py, or wherever locate reported). Do not hardcode any particular machine's path. Write the candidate config to a temp path (e.g. the OS temp dir), then:

PowerShell:

$env:STATUSLINE_CONFIG="<temp-config>"; Get-Content <skill>/assets/sample_input.json | uv run <statusline.py>

(fallback: replace uv run with python)

bash:

STATUSLINE_CONFIG=<temp-config> uv run <statusline.py> < <skill>/assets/sample_input.json

(fallback: python3 instead of uv run)

A non-empty colored line = success. Show the rendered bar to the user.

---

Step 8 — Confirm, then commit (history-aware)

Only on explicit user confirmation (after the Step 5 diff, Step 6 validate, and Step 7 test-render), install the new config. Otherwise iterate from Step 2. Never write the live config without confirmation.

Never write the live config directly. Instead, write the fully-built new config object (comments / _disabled_* / colors preserved exactly as required above) to a temp file, then hand that file to the shared helper, which snapshots the about-to-be-replaced config and records a human changelog entry next to the active config:

python statusline_io.py commit --config <config_path> --new <temp-new-config> \
    --skill statusline-config \
    --summary "<what changed, e.g. switched to three-line preset; added weather + big ctx bar>" \
    --why "<the user's intent in their words>" \
    --diff "<the key changes, e.g. the unified diff from Step 5>"

• <config_path> is the ACTIVE config resolved in Step 1.
• <temp-new-config> is the temp file holding your fully-formed new config (the same content you test-rendered in Step 7 — reuse that temp file).
• The helper validates the temp file parses as JSON before touching anything, snapshots the current config into .statusline-config-history/YYYYMMDD-hhmm.json next to the active config, writes the new bytes to the active config, and appends to .statusline-config-history/YYYYMMDD.md.

It prints {"snapshot": <path or null>, "changelog": <path>, "config_path": <abs>}. Report the snapshot and changelog paths to the user so they know where the previous version and the change note were saved.

---

Preset templates (copy verbatim when a preset is chosen)

Set the listed templates, weather, and emoji_width fields; keep the existing colors block and all _comment* keys untouched. (The presets below show emoji_width: 1 to match examples/; if the user's emoji render 2-wide, use 2.)

For any preset that uses {weather}/{sun} you MUST first run Step 3 geocoding and fill the weather block's name/latitude/longitude with the resolved values before writing — do not ship the placeholders shown below.

Minimal (1 line): (no weather)

"emoji_width": 1,
"templates": {
  "line1": "{c.model}{model}{r}  {c.ctx_label}Ctx{r} {c.ctx_value}{ctx}{r} {c.ctx_percent}({ctx_percent}%){r} {ctx_micro}"
}

Two-line (weather + compact usage): (replace the weather placeholders with the Step 3 geocoded city)

"emoji_width": 1,
"weather": {
  "name": "<geocoded name>", "latitude": <lat>, "longitude": <lon>,
  "show_name": true, "show_icon": true, "show_temp": true,
  "show_humidity": true, "show_wind": true
},
"templates": {
  "line1": "{sun} {c.time}[{time}]{r} {c.model}{model}{r}{c.effort}{effort}{r}  {c.ctx_label}Ctx{r} {c.ctx_percent}({ctx_percent}%){r}",
  "line2": "{c.weather}{weather}{r}   {compact_usage_micro}"
}

Three-line (context bar + git): (replace the weather placeholders with the Step 3 geocoded city)

"emoji_width": 1,
"weather": {
  "name": "<geocoded name>", "latitude": <lat>, "longitude": <lon>,
  "show_name": false, "show_icon": true, "show_temp": true,
  "show_humidity": false, "show_wind": false
},
"templates": {
  "line1": "{c.time}[{time}]{r} {c.version}{version}{r} {c.model}{model}{r}{c.effort}{effort}{r} Ctx:{ctx} {c.ctx_percent}({ctx_percent}%){r}",
  "line2": "{c.weather}{weather}{r}{align_pad}{c.ctx_bracket}▐{r}{ctx_bar}{c.ctx_bracket}▌{r}",
  "line3": "{c.path}{path}{r} {c.git_icon}(git)/{r}{c.branch}{branch}{r} ({c.output}+{added}{r},{c.input}-{removed}{r})"
}

Four-line (full usage): (no weather)

"emoji_width": 1,
"templates": {
  "line1": "{c.time}[{time}]{r} {c.model}{model}{r}{c.effort}{effort}{r} Ctx:{ctx} {c.ctx_percent}({ctx_percent}%){r}",
  "line2": "{c.path}{path}{r} {c.git_icon}(git)/{r}{c.branch}{branch}{r} ({c.output}+{added}{r},{c.input}-{removed}{r})",
  "line3": "{usage_bars}",
  "line4": "{usage_resets}"
}

---

Status config block

The status block is optional — if absent, all status placeholders use these defaults. Add or edit the block to override specific keys; the rest remain at their defaults.

"status": {
  "show_icon":             true,   // show the incident emoji in {status}
  "show_label":            true,   // show the status label (Investigating / Identified / Monitoring …)
  "show_title":            true,   // show the incident title text
  "show_count":            true,   // show "(+N)" hint when multiple incidents are active
  "show_header":           true,   // allow {status_header} to render
  "include_maintenance":   false,  // also surface scheduled / in-progress maintenance events
  "max_len":               48,     // global char cap for {status} (0 = unlimited)
  "max_age_hours":         48,     // only incidents updated within this many hours count (0 = no limit)
  "title": "⚠️ Claude have some issues"  // banner text shown by {status_header}
}

Key notes:

• max_len is the global cap for {status}; {status:N} overrides it per-line (0 = unlimited for that line).
• include_maintenance: false (default) hides scheduled/in-progress maintenance events; set to true to surface them alongside incidents.
• max_age_hours: 0 disables the age filter — every parsed incident counts regardless of when it was last updated.
• A leading emoji in title is auto-spaced from the words; no manual spacing needed.
• The status block does not live inside colors — it is a sibling of templates, weather, and emoji_width.
• Color keys for the status indicator (status_investigating, status_identified, status_monitoring, status_maintenance, status_default, status_title, status_count, status_header) live in the colors block and are owned by /statusline-theme; do not touch them here.