Biome

Biome Setup and Configuration

Expert guidance for setting up and configuring Biome linter and formatter in JavaScript/TypeScript projects, with emphasis on handling unsafe fixes for routine development workflows.

When to Use This Skill

• Setting up Biome in new or existing projects
• Auditing existing Biome configurations
• Checking if Biome config follows best practices
• Configuring Biome for Next.js, React, or vanilla JS/TS projects
• Understanding and applying unsafe fixes
• Migrating from ESLint + Prettier
• Optimizing Biome for team workflows
• Fixing Biome configuration issues
• Reviewing unsafe fix strategy
• Troubleshooting formatting or linting problems

Core Principles

Unsafe fixes in routine workflow - While Biome marks certain fixes as "unsafe" because they may change code semantics, many of these (like removing unused imports/variables) are safe enough for routine development and should be part of standard lint/format workflows.

Single tool simplicity - Biome replaces both ESLint and Prettier with a single, fast tool. Configure once, use everywhere.

Installation

New Projects

For Next.js 16+ projects, use the built-in flag:

pnpm create next-app@latest --biome my-app

Existing Projects

Install with exact version pinning and initialize:

pnpm add -D -E @biomejs/biome
npx @biomejs/biome init

Why these steps:

• -E flag ensures consistent behavior across team members and CI
• init generates biome.json with correct schema version and modern syntax

Then customize the generated config with your project's needs (see Configuration section below).

Configuration File Structure

Biome uses biome.json (or biome.jsonc for comments) in project root.

Basic Configuration

After running biome init and biome migrate, customize the generated config:

{
  "$schema": "https://biomejs.dev/schemas/[VERSION]/schema.json",
  "vcs": {
    "enabled": true,
    "clientKind": "git",
    "useIgnoreFile": true
  },
  "files": {
    "ignoreUnknown": true,
    "includes": ["src/**", "app/**", "lib/**", "*.ts", "*.js"]
  },
  "formatter": {
    "enabled": true,
    "indentStyle": "tab",
    "lineWidth": 100
  },
  "linter": {
    "enabled": true,
    "rules": {
      "recommended": true,
      "correctness": {
        "noUnusedImports": {
          "level": "error",
          "fix": "safe"
        },
        "noUnusedVariables": {
          "level": "error",
          "fix": "safe"
        }
      },
      "style": {
        "useConst": {
          "level": "error",
          "fix": "safe"
        },
        "useTemplate": {
          "level": "error",
          "fix": "safe"
        }
      }
    }
  },
  "javascript": {
    "formatter": {
      "quoteStyle": "double",
      "semicolons": "always",
      "trailingCommas": "all",
      "arrowParentheses": "asNeeded"
    }
  },
  "assist": {
    "enabled": true,
    "actions": {
      "source": {
        "organizeImports": "on"
      }
    }
  }
}

Note: The rule overrides in the linter.rules section change commonly-used rules from "unsafe" to "safe" fixes:

• noUnusedImports - Automatically removes unused imports
• noUnusedVariables - Automatically prefixes unused variables with underscore
• useConst - Automatically changes let to const for never-reassigned variables
• useTemplate - Automatically converts string concatenation to template literals

These fixes will now apply on editor save and during normal --write operations without needing the --unsafe flag. See "Decision Framework" section for details on when to use these overrides.

Understanding Unsafe Fixes

What Makes a Fix "Unsafe"?

Biome marks fixes as unsafe when they might change code semantics or behavior:

• noUnusedImports: Removes unused imports (unsafe because might remove associated comments or affect type-only imports)
• noUnusedVariables: Prefixes unused variables with underscore (unsafe because doesn't remove, just silences)
• Other transformation rules that modify logic

Safe vs Unsafe Philosophy

Safe fixes are guaranteed not to change program behavior and can auto-apply on save.

Unsafe fixes might alter semantics and require the --unsafe flag.

"Safe Enough" Unsafe Fixes

For routine development, these unsafe fixes are typically safe to apply regularly:

1. noUnusedImports - Removing unused imports is almost always desired
2. noUnusedVariables - Flagging unused variables catches bugs
3. organizeImports (via assist) - Sorting imports improves consistency

Package.json Scripts

Recommended Scripts

{
  "scripts": {
    "format": "biome format --write .",
    "lint": "biome lint --write .",
    "check": "biome check --write .",
    "check:ci": "biome ci ."
  }
}

Script purposes:

• format - Format files only (dev workflow)
• lint - Lint and auto-fix issues (dev workflow)
• check - Combined format + lint + organize imports (dev workflow)
• check:ci - CI-safe check that fails without modifying files

Note on removed scripts:

• format:check and lint:check are redundant - biome ci handles all CI checking
• For local read-only checks, use biome ci . directly

With Unsafe Fixes (Optional)

If you haven't configured individual rules as "safe" (see Configuration section), add --unsafe to dev scripts:

{
  "scripts": {
    "lint": "biome lint --write --unsafe .",
    "check": "biome check --write --unsafe ."
  }
}

Only needed if:

• You want unused imports/variables removed automatically
• Rules like noUnusedImports still marked as "unsafe" in your config

Usage Patterns

# Daily development - lint and auto-fix
pnpm lint

# Pre-commit/PR - comprehensive check with all fixes
pnpm check

# CI - verify only, no changes
pnpm check:ci

# Quick format only
pnpm format

Next.js Integration

When using Biome with Next.js, disable ESLint during builds:

// next.config.ts
import type { NextConfig } from 'next';

const nextConfig: NextConfig = {
  eslint: {
    // Using Biome instead of ESLint
    ignoreDuringBuilds: true,
  },
};

export default nextConfig;

Editor Integration

VS Code

Install extension: biomejs.biome

Add to .vscode/settings.json:

{
  "[javascript]": {
    "editor.defaultFormatter": "biomejs.biome",
    "editor.formatOnSave": true
  },
  "[javascriptreact]": {
    "editor.defaultFormatter": "biomejs.biome",
    "editor.formatOnSave": true
  },
  "[typescript]": {
    "editor.defaultFormatter": "biomejs.biome",
    "editor.formatOnSave": true
  },
  "[typescriptreact]": {
    "editor.defaultFormatter": "biomejs.biome",
    "editor.formatOnSave": true
  }
}

Important: Editor integration applies only safe fixes on save. Unsafe fixes require manual CLI execution with --unsafe flag.

Migration from ESLint + Prettier

Step-by-Step

1. Install Biome

   pnpm add -D -E @biomejs/biome
   npx @biomejs/biome init
   

2. Remove old tooling

   pnpm remove eslint prettier eslint-config-next eslint-config-prettier
   

3. Delete config files

   • .eslintrc.json or .eslintrc.js
   • .prettierrc or prettier.config.js
   • .prettierignore

4. Update package.json scripts (see Scripts section above)

5. Format codebase

   pnpm format
   pnpm lint  # includes --unsafe if configured
   

6. Update Next.js config (if applicable, see Next.js Integration)

7. Commit changes

   git add .
   git commit -m "Migrate from ESLint+Prettier to Biome"
   

Decision Framework

When to Use Unsafe Fixes

✅ Use --unsafe flag for:

• Daily development linting (pnpm lint)
• Pre-commit cleanup (pnpm check)
• Removing unused imports/variables
• Team workflows where code review catches issues

❌ Skip --unsafe flag for:

• CI checks (pnpm check:ci)
• Automated tools with no human review
• Generated code
• Legacy code with uncertain test coverage

When to Configure Individual Rule Safety

Recommended: Override common "safe enough" unsafe rules

These rules are marked unsafe by default but are almost always safe to apply automatically:

{
  "linter": {
    "rules": {
      "recommended": true,
      "correctness": {
        "noUnusedImports": {
          "level": "error",
          "fix": "safe"
        },
        "noUnusedVariables": {
          "level": "error",
          "fix": "safe"
        }
      },
      "style": {
        "useConst": {
          "level": "error",
          "fix": "safe"
        },
        "useTemplate": {
          "level": "error",
          "fix": "safe"
        }
      }
    }
  }
}

Impact: These fixes will now apply on editor save and in normal --write operations without needing --unsafe flag.

Why these are safe enough:

• noUnusedImports - Removing unused imports is desired 98% of the time
• noUnusedVariables - Only prefixes with underscore, doesn't remove code
• useConst - Changing let to const for never-reassigned variables improves code quality
• useTemplate - Template literals are preferred modern syntax

Common Patterns

Monorepo Configuration

Root biome.json with shared settings:

{
  "$schema": "https://biomejs.dev/schemas/[VERSION]/schema.json",
  "extends": ["./packages/*/biome.json"],
  "files": {
    "ignoreUnknown": true
  }
}

Package-specific overrides:

{
  "extends": ["../../biome.json"],
  "files": {
    "includes": ["src/**", "test/**"]
  }
}

Project-Specific Ignore Patterns

Use includes with negation patterns (modern syntax):

{
  "files": {
    "includes": [
      "**",
      "!**/node_modules/**",
      "!**/.next/**",
      "!**/dist/**",
      "!**/build/**",
      "!**/coverage/**",
      "!**/*.generated.ts",
      "!**/__snapshots__/**"
    ]
  }
}

Note: The deprecated ignore field will cause configuration errors. Use includes with exclamation mark (!) prefix for exclusions.

Gradual Adoption

Start with recommended rules, then add more as codebase improves:

{
  "linter": {
    "rules": {
      "recommended": true,
      "correctness": {
        "noUnusedImports": "error",
        "noUnusedVariables": "warn"  // Warn first, error later
      }
    }
  }
}

Troubleshooting

Issue: "Found an unknown key ignore" error

Symptom: Biome check/lint/format fails with deserialize error about unknown ignore key.

Cause: Config uses deprecated files.ignore field (pre-2.2 syntax). Modern biome uses files.includes with negation patterns.

Solution - Option 1 (Auto-fix):

# Let biome migrate deprecated syntax automatically
npx @biomejs/biome migrate --write

# Verify config is fixed
npx @biomejs/biome check .

Solution - Option 2 (Manual fix): Update biome.json to use modern syntax:

// OLD (deprecated - causes error)
"files": {
  "ignore": ["node_modules/**", "dist/**"]
}

// NEW (modern - works)
"files": {
  "includes": ["**", "!**/node_modules/**", "!**/dist/**"]
}

When you see this:

• Copying old config examples from Stack Overflow, old docs, etc.
• Using config written for biome < 2.2
• After upgrading biome versions

Issue: Biome not formatting in editor

• Ensure Biome extension installed
• Check .vscode/settings.json has correct defaultFormatter
• Restart editor after installing extension
• Verify biome.json exists and is valid

Issue: Unused imports not being removed

• Check that noUnusedImports is enabled (included in recommended)
• Use --unsafe flag: pnpm biome lint --write --unsafe .
• Verify assist.actions.source.organizeImports is enabled

Issue: Different formatting between CLI and editor

• Ensure exact Biome version pinned with -E flag
• Check no conflicting Prettier extension active
• Run npx @biomejs/biome version to verify version
• Clear editor cache and restart

Issue: Build fails with ESLint errors

• Add eslint: { ignoreDuringBuilds: true } to next.config.js
• Remove ESLint dependencies
• Ensure Biome scripts in package.json

Issue: Git shows too many changes after migration

Expected! Biome has different formatting defaults than Prettier. Do migration in dedicated commit:

pnpm format
pnpm lint --unsafe  # or pnpm check --unsafe
git add .
git commit -m "chore: apply Biome formatting"

Resources

• Official docs: https://biomejs.dev
• Configuration guide: https://next.biomejs.dev/guides/configure-biome/
• Linter rules: https://biomejs.dev/linter/rules/
• Next.js integration: https://next.biomejs.dev/linter/domains/#next

Version Notes

This skill is current as of Biome 2.3+ (November 2025). Check official docs for latest features.