Clean context

Safety check

Run git status. If there is any uncommitted work in the current branch, bail immediately with a warning and do not proceed.

Run git worktree list. Note any dirty worktrees (other than the main one) — these are not an immediate bail condition. Each dirty worktree is evaluated individually in the Merged worktree sweep below: if its branch is merged into main, it will be force-removed with a log line; if its branch is NOT merged (or branch state cannot be determined), the existing bail logic fires at that point.

Only continue when the uncommitted-work check passes.

Scratchpad and temp-artifact archival

Scan for scratchpad_*.md files and temporary build artifacts in the project root and subdirectories.

Also scan for docs/temp-*.md files — this project uses the temp-*.md naming convention under docs/ for sprint plans, interview docs, and other sprint-scoped artifacts. Apply the same lifecycle logic:

• Temp documents (sprint-scoped, disposable after sprint close): move to docs/archive/ or delete per the instructions below.
• Permanent documents: skip entirely — do not archive or delete.

Exclusions (never touch):

• docs/archive/** — already archived; skip.
• docs/context/temp-architectural-assessment.md — permanent artifact despite the temp- prefix; skip.

How to distinguish temp from permanent for docs/temp-*.md files:

• If the file's sprint is closed (sprint appears in docs/context/plan.md Completed Sprint sections OR in docs/archive/plan-docs/), treat as temp → archive to docs/archive/ or delete if content has no residual value.
• If the sprint is still active, or the file cannot be attributed to a sprint, treat as permanent → skip.

Move docs/temp-*.md files for closed sprints to docs/archive/ (creating the directory if absent) or delete them if the project policy is to delete and the file has no useful content. Log each action.

Move scratchpad_*.md files to .agent/archives/ per project policy, or delete if the project has no archive directory and the file has no useful content. Log each action.

Open-PR guard (warn-only)

Belt-and-suspenders check: warn if any pull requests are still open against feature/* branches before the worktree and branch sweeps run. This is a warning only — it never bails and never blocks cleanup, and it degrades silently when GitHub CLI is unavailable.

1. If gh is not installed, skip this section entirely — no output:

   command -v gh >/dev/null 2>&1 || :   # skip silently when gh absent
   

2. Otherwise, query open feature-branch PRs (stderr suppressed so an unauthenticated gh, a repo with no GitHub remote, or any other failure produces no output):

   gh pr list --state open \
     --json number,title,headRefName,url \
     --limit 100 \
     --jq '.[] | select(.headRefName | startswith("feature/")) | "  #\(.number)  \(.headRefName)  —  \(.title)  (\(.url))"' \
     2>/dev/null
   

3. If the command produced no output — emit nothing and continue to the Merged worktree sweep.

4. If the command produced one or more lines, print this warning, then continue (cleanup does NOT stop):

   Warning: the following PRs are still open against feature/* branches. Cleanup will continue, but their branches will not be swept until the PRs are merged or closed:
   
   <captured lines>
   

Merged worktree sweep

For each directory under .claude/worktrees/ (and .worktrees/ if present), check whether its branch is merged into main:

git branch --merged main

For clean (non-dirty) worktrees: if merged, run git worktree remove <path> and log it. If not merged, log and skip.

For dirty worktrees, apply the following three-case logic before taking any action:

1. Determine the worktree's branch. Run git -C <path> branch --show-current to get the branch name.

2. If the branch is in git branch --merged main output (branch is merged): Force-remove the worktree:

   git worktree remove --force <path>
   

   Then emit a mandatory log line in exactly this format:

   force-removed merged worktree: <path> (branch: <branch-name>, last commit: <SHA>)
   

   where <SHA> is the output of git -C <path> rev-parse --short HEAD captured before removal. Continue to the next worktree.

3. If the branch is NOT in git branch --merged main output (branch is not merged): Bail with a warning naming the affected worktree:

   Worktree <path> is dirty and its branch (<branch-name>) is not merged into main. Resolve or commit the work before running /clean-context. Stop the cleanup phase.

4. If branch state cannot be determined (e.g. detached HEAD, git -C <path> branch --show-current returns empty, or the git command errors): Treat as "not merged" and bail per the existing logic above. Do NOT auto-force-remove a worktree whose branch state is ambiguous.

The log line on every force-remove is mandatory. Without it, the user has no audit trail of what was destroyed. Log to stdout so the line appears in the cleanup summary.

Log any skipped worktrees (non-merged or ambiguous) with the reason.

Merged branch sweep

Run git branch --merged main. Delete every feature/* branch that appears:

git branch -d <branch>

Never use -D (force-delete). If a branch is not fully merged, log it and skip.

Bridge file sweep

Delete all files in docs/bridges/ except README.md. Bridge files (both *-bridge.md and *-signoff.md) are working documents — once a sprint is closed and its tracks are merged to main, git history is the complete audit record. No archival is needed; deletion is the policy.

This step runs unconditionally at clean-context time — it does not check sprint boundaries. Any bridge file present at clean-context time is by definition from a closed sprint, because clean-context only runs after sprint close.

Steps:

1. Check that docs/bridges/ exists. If absent, log docs/bridges/ not found — skipping and continue without error.
2. Delete all files in docs/bridges/ except README.md:

   find docs/bridges/ -maxdepth 1 -type f ! -name 'README.md' -delete
   

3. Stage the deletions:

   git add -A docs/bridges/
   

4. Log the count of files deleted. If zero, log docs/bridges/ — no bridge files to delete.

Collapse closed sprint in context files

Run after the Bridge file sweep and before the Memory hygiene scan. This step collapses the just-closed sprint's full content in docs/context/plan.md and docs/context/tracks.md down to one-line pointers, so context files do not accumulate every sprint's full content indefinitely.

1. Find the sprint number. Read docs/context/plan.md and locate the ## Current Sprint: SN — heading. Extract the sprint number N from it (the integer after S).

2. Verify the archive exists. Confirm docs/archive/plan-docs/SN.md exists.

   • If it does NOT exist, bail this step immediately with the warning:

     Sprint SN archive not found at docs/archive/plan-docs/SN.md — cannot collapse context files. Run /clean-context only after the sprint has been archived.
     

     Do not touch either file. Do not stage anything. Continue to the next step of the skill (Memory hygiene scan) — bailing this step does not abort the whole run.

3. If the archive exists, collapse both files:

   a. docs/context/plan.md: Replace the entire ## Current Sprint: SN block — from the ## Current Sprint: SN — heading line through the blank line immediately before the next line that begins with ## or ---, including all goal checkboxes and any trailing content under it — with this single line:

   ## Completed Sprint: SN ✓ — see docs/archive/plan-docs/SN.md
   

   b. docs/context/tracks.md: Replace the entire ## Sprint N Tracks block — from the ## Sprint N Tracks heading line through the blank line immediately before the next line that begins with ## or ---, including all track entries and any trailing content under it — with this single line:

   ## Sprint N Tracks ✓ — see docs/archive/plan-docs/SN.md
   

   Replace only the single named block in each file. Stop at the first boundary (## heading or --- divider). Never delete past it — the Completed-Sprint pointer lines and prior-sprint sections below must be preserved intact.

4. Stage both files:

   git add docs/context/plan.md docs/context/tracks.md
   

5. Log: Collapsed Sprint SN in plan.md and tracks.md

Memory hygiene scan

Run after the merged-branch sweep and before the Context Health update.

Locate the memory directory at ~/.claude/projects/<sanitized-cwd>/memory/ where <sanitized-cwd> is the value of CLAUDE_PROJECT_DIR (or current working directory) with the leading / stripped and all remaining / replaced with -.

If the memory directory does not exist, print Memory hygiene scan: no memory directory found at <path> — skipping and continue without error.

File classification

For each file in the memory directory (excluding MEMORY.md itself), classify by filename prefix:

• reference_* — reference memory (pointers to external systems)
• feedback_* — feedback memory (behavioral rules)
• project_* — project memory (sprint/initiative state)
• unclassified — any file not matching the above prefixes

Per-category staleness policy

reference_* — never auto-flag for prune. Only flag as RETIRE candidate if the concrete artifact referenced in the body no longer exists at that path.

feedback_* — never auto-flag for prune. Only flag as RETIRE candidate if the behavioral rule has been codified verbatim into any claude/agents/*.md or any claude/skills/**/SKILL.md (i.e. the rule is now enforced as a system constraint and the memory file is redundant).

project_* — flag as RETIRE candidate only if BOTH of the following signals are present (two-signal rule):

1. The Created: field is older than 90 days, OR the file's mtime is older than 90 days.
2. The referenced sprint is archived (appears in docs/context/plan.md Completed Sprint sections OR in docs/archive/plan-docs/), OR the file contains no sprint reference AND is not referenced in MEMORY.md's index.

A single signal alone is not sufficient to flag a project_* file. Both signals must be independently satisfied.

If the Created: field is missing, surface the file as stale-undatable — the two-signal rule still applies.

Unclassified — never auto-flag. Surface as manual review required with no action proposed.

Report format

Print findings as a markdown table:

File	Category	Stale signals matched	Action proposed
path/to/file.md — first-line summary	reference / feedback / project / unclassified	explicit list	RETAIN / RETIRE candidate / MERGE candidate (duplicate of X) / manual review required

If no findings: print Memory hygiene scan: no findings — all memory files current.

Hard constraints

Never delete any memory file. This step is read-only with respect to memory file content and existence. The Conductor decides whether to mark a candidate STATUS: retired.

When the Conductor approves a retirement, the skill writes two lines into the file in-place (no deletion):

STATUS: retired — <one-line reason>
Retired: YYYY-MM-DD

The file remains on disk as part of the learning record.

Tombstone retirement workflow

After the report is displayed, ask: "Approve any retirements? (list file numbers, or 'none')"

For each approved file:

1. Write STATUS: retired — <reason from Conductor> and Retired: YYYY-MM-DD as the first content lines.
2. Print confirmation: Retired: <filename>.
3. Do NOT delete the file.

For declined files: log as Retained — Conductor decision.

Canonical file scope

Canonical agent files (claude/agents/*.md) and skill files (claude/skills/*/SKILL.md) are eligible for stale content removal when they contain stale cross-references, dead protocol sections, or redundant content. These files are protected by the hook layer, not by verbosity — removal of outdated content is safe.

Backlog file check

Confirm docs/backlog.md exists. This file is the standalone backlog owned by the orchestrator and Conductor — do not archive or delete it.

If docs/backlog.md is absent, print a warning: docs/backlog.md not found — backlog file is missing. Expected at docs/backlog.md.

If present, log: docs/backlog.md present — no action taken (presence-check only).

Do not modify the file contents. This step is read-only and verification-only.

Context Health update

Open docs/context/tracks.md. Update the "Context Health" status line to reflect the current state (branches pruned, worktrees removed, scratchpads archived, memory hygiene scan run). Record the date.

Push to origin

Run git push origin main. This triggers the distribute workflow on the private repo and syncs the public mirror. If the push fails (e.g. remote has diverged), surface the error to the Conductor — do not force-push.

Verification checklist

• Safety gate fires: skill refuses to proceed when git status shows uncommitted work on the current branch.
• Dirty worktrees whose branch IS merged into main are force-removed with the mandatory log line in the format force-removed merged worktree: <path> (branch: <branch-name>, last commit: <SHA>).
• Dirty worktrees whose branch is NOT merged into main trigger the bail with a warning naming the affected worktree — cleanup stops.
• Dirty worktrees with ambiguous branch state (detached HEAD, empty branch output, or git error) are treated as "not merged" and trigger the bail — cleanup stops.
• scratchpad_*.md files were moved or deleted; .agent/archives/ updated where applicable.
• docs/temp-*.md files for closed sprints were archived to docs/archive/ or deleted; docs/archive/** and docs/context/temp-architectural-assessment.md were never touched.
• Merged worktrees under .claude/worktrees/ (and .worktrees/ if present) were removed; unmerged ones were logged and skipped.
• No feature/* branch that was already merged to main remains; unmerged ones were logged.
• Open-PR guard: warned when open PRs target feature/* branches, or emitted nothing when none matched / gh unavailable; never bailed.
• Memory hygiene scan: the pruning report fired (or "no findings" was printed); no memory file was deleted.
• tracks.md Context Health entry updated with the current date.
• git push origin main was run successfully (or surfaced to Conductor on failure with no force-push attempt).
• docs/bridges/ was swept: all bridge/sign-off files deleted except README.md, and deletions staged with git add -A docs/bridges/ — or docs/bridges/ not found — skipping / no bridge files to delete was logged when applicable.
• docs/context/plan.md current sprint section collapsed to one-line pointer (or bail message printed when archive absent).
• docs/context/tracks.md current sprint tracks section collapsed to one-line pointer (or bail message printed when archive absent).