Ffmpeg bitstream

Ffmpeg Bitstream

Context: $ARGUMENTS

Quick start

• MP4 H.264 → TS/HLS: -bsf:v h264_mp4toannexb → Step 3, recipe A
• MP4 HEVC → TS: -bsf:v hevc_mp4toannexb → Step 3, recipe A
• TS AAC → MP4: -bsf:a aac_adtstoasc → Step 3, recipe B
• Old DivX/XviD packed B-frames: -bsf:v mpeg4_unpack_bframes → Step 3, recipe D
• Rewrite H.264 level / VUI: -bsf:v h264_metadata=... → Step 3, recipe E
• Strip SEI / AUD / filler NALs: -bsf:v filter_units=remove_types=6 → Step 3, recipe F
• Dump extradata into every keyframe (streaming recovery): -bsf:v dump_extra=freq=k
• Zero-base timestamps without re-encoding: -bsf:v setts=ts=PTS-STARTPTS
• Debug NAL/SPS/PPS structure: -bsf:v trace_headers

When to use

• Container mux fails with Malformed AAC bitstream detected / H.264 bitstream not in Annex-B format.
• Need to remux MP4 ↔ TS / HLS / MKV with -c copy (no re-encode, no quality loss).
• Change H.264/HEVC level, profile, color primaries, or VUI flags without touching pixels.
• Split a stream into segments that need keyframe-carried SPS/PPS for mid-stream joins.
• Strip SEI/AUD NAL units a downstream decoder chokes on.
• Rewrite PTS/DTS on the packet level (e.g. zero-base timestamps, offset by N).
• Pull SPS/PPS out of a file for a hardware pipeline.
• Fix broken old MP4s with packed B-frames (DivX/XviD era).
• For re-encode workflows use ffmpeg-transcode; for trimming use ffmpeg-cut-concat; for pure container inspection use ffmpeg-probe.

Step 1 — Identify the mux / codec mismatch

Probe first — bsf choice depends on codec + source container + target container:

ffprobe -v error -show_entries stream=index,codec_type,codec_name,profile -of json "$IN"

What to look at:

• Video codec_name = h264 → pick h264_mp4toannexb or h264_metadata.
• Video codec_name = hevc / h265 → pick hevc_mp4toannexb or hevc_metadata.
• Audio codec_name = aac coming from mpegts → need aac_adtstoasc for MP4.
• Source container = .mp4 / .mov (AVCC / length-prefixed NAL) vs .ts / .flv (Annex-B / start-code NAL) — this is the framing that bsf rewrites.

Container ↔ framing cheat-sheet (H.264 / HEVC):

Source container	Framing	Target container	Required -bsf:v
.mp4 / .mov	AVCC	.ts / HLS / .flv	h264_mp4toannexb / hevc_mp4toannexb
.ts / .flv	Annex-B	.mp4 / .mov	none (ffmpeg converts back automatically)
.mkv	either	.mp4 / .ts	usually none (mkv stores extradata out-of-band)

Audio (AAC):

Source container	Framing	Target container	Required -bsf:a
.ts / .aac	ADTS	.mp4 / .mov	aac_adtstoasc
.mp4 / .mkv	ASC	.ts / .flv	none (auto)

Step 2 — Pick the right bsf

Conversion filters (change framing / headers):

• h264_mp4toannexb — MP4 AVCC → Annex-B. Required for MP4 → TS/HLS/FLV with -c copy. No options needed.
• hevc_mp4toannexb — same, for H.265/HEVC.
• aac_adtstoasc — ADTS → MP4 AudioSpecificConfig. Required for TS AAC → MP4 -c copy.
• mpeg4_unpack_bframes — fix old DivX/XviD MP4s that packed a B-frame inside the preceding P-frame. Transparent no-op on normal MP4.
• mjpeg2jpeg — split an MJPEG video stream into individual JPEG packets (use with -c copy -f image2 to write frame_%04d.jpg).

Metadata rewriters (change header fields only):

• h264_metadata, hevc_metadata, av1_metadata — edit SPS/VPS/PPS/OBU fields: level, profile, tier, aud, sample_aspect_ratio, video_format, colour_primaries, transfer_characteristics, matrix_coefficients, chroma_sample_loc_type, tick_rate, crop_{left,right,top,bottom}, fixed_frame_rate_flag, overscan_appropriate_flag.

Extradata manipulation:

• extract_extradata — emit codec extradata (SPS/PPS) as side-data packets.
• dump_extra=freq=k — repeat extradata before every keyframe (makes segments independently decodable; costs a few bytes per IDR).
• remove_extra=freq=k — inverse — strip extradata from keyframes.

NAL-unit surgery:

• filter_units=remove_types=6 — drop NAL units by type (see Step 3 recipe F and references/filters.md for the type table).
• filter_units=pass_types=... — whitelist mode.
• filter_units=discard_flags=... — drop packets with a given flag.

Timing / debugging / fuzz:

• setts=ts=... / pts=... / dts=... — expression-based PTS/DTS rewrite. Expression vocab: PTS, DTS, STARTPTS, STARTDTS, PREV_INPTS, PREV_OUTPTS, PREV_INDTS, PREV_OUTDTS, N (packet index), TB (timebase).
• trace_headers — pretty-print SPS/PPS/slice headers to stderr. Read-only.
• noise — random byte fuzzing for robustness testing. amount, drop, dropamount.

Step 3 — Apply with -c copy

-bsf:v and -bsf:a only fire when the stream is copied. Any -c:v libx264 / -c:a aac re-encode rewrites extradata itself — the bsf is silently ignored.

Recipe A — MP4 H.264/HEVC → TS / HLS:

# H.264
ffmpeg -i in.mp4 -c copy -bsf:v h264_mp4toannexb out.ts

# HEVC
ffmpeg -i in.mp4 -c copy -bsf:v hevc_mp4toannexb out.ts

Modern ffmpeg auto-inserts these when muxing mpegts from mp4 — but passing the flag explicitly is always safe and portable across older builds.

Recipe B — TS (AAC) → MP4:

ffmpeg -i in.ts -c copy -bsf:a aac_adtstoasc out.mp4

Unlike the video bsf, ffmpeg does NOT always auto-insert aac_adtstoasc. Always pass it when targeting MP4 from a TS/FLV/raw-AAC source.

Recipe C — HLS segment with keyframe-carried extradata (mid-segment joinable):

ffmpeg -i in.mp4 -c copy \
  -bsf:v "h264_mp4toannexb,dump_extra=freq=k" \
  -f mpegts segment.ts

Chain multiple bsf with a comma inside the same -bsf:v argument.

Recipe D — Fix packed B-frames in old DivX/XviD MP4s:

ffmpeg -i old.avi -c copy -bsf:v mpeg4_unpack_bframes -f mp4 fixed.mp4

Symptom you're fixing: player shows "warning: Invalid and inefficient vfw-avi packed B-frames detected" or every other frame is black.

Recipe E — Rewrite H.264 metadata (level, VUI, SAR) in place:

# Claim Level 4.1 so a hardware decoder that refuses 4.2 will accept it:
ffmpeg -i in.mp4 -c copy -bsf:v "h264_metadata=level=4.1" out.mp4

# Tag BT.709 color primaries + transfer + matrix (HD):
ffmpeg -i in.mp4 -c copy \
  -bsf:v "h264_metadata=colour_primaries=1:transfer_characteristics=1:matrix_coefficients=1" \
  tagged.mp4

# Fix square-pixel signalling (SAR 1:1):
ffmpeg -i in.mp4 -c copy -bsf:v "h264_metadata=sample_aspect_ratio=1/1" out.mp4

HEVC/AV1 equivalents: hevc_metadata=..., av1_metadata=.... Same field names.

Recipe F — Strip NAL unit types (SEI, AUD, filler):

# H.264: strip SEI (type 6) — fixes some broadcast players that choke on timecode SEI:
ffmpeg -i in.mp4 -c copy -bsf:v "filter_units=remove_types=6" out.mp4

# Strip SEI + AUD + filler:
ffmpeg -i in.mp4 -c copy -bsf:v "filter_units=remove_types=6|9|12" out.mp4

H.264 NAL types you care about: 5=IDR, 6=SEI, 7=SPS, 8=PPS, 9=AUD, 12=filler. HEVC types live in a different range — see references/filters.md.

Recipe G — Zero-base timestamps:

# Reset PTS/DTS so the file starts at 0, preserving spacing:
ffmpeg -i in.mp4 -c copy \
  -bsf:v "setts=ts=PTS-STARTPTS" \
  -bsf:a "setts=ts=PTS-STARTPTS" \
  zeroed.mp4

# Offset video by +2s (shift audio-video sync):
ffmpeg -i in.mp4 -c copy -bsf:v "setts=ts=PTS+2/TB" out.mp4

Remember: setts expressions run in the packet timebase — multiply seconds by 1/TB (or equivalently, divide by TB).

Recipe H — Extract SPS/PPS (extradata) as side-data:

ffmpeg -i in.mp4 -c:v copy -bsf:v extract_extradata -f null -
# Combined with ffprobe -show_packets -show_data to read the side-data bytes.

For most practical needs use ffprobe directly — extract_extradata is mostly a building block for piping to another tool.

Recipe I — MJPEG video stream → individual JPEG files:

ffmpeg -i in.avi -c:v copy -bsf:v mjpeg2jpeg frame_%04d.jpg

Recipe J — Debug / inspect headers:

ffmpeg -i in.mp4 -c:v copy -bsf:v trace_headers -f null - 2>&1 | less

Dumps every SPS / PPS / slice header field in human-readable form. Needs a build with CBS (coded-bitstream) support — almost every modern ffmpeg has it.

Step 4 — Verify

# Container + streams sane:
ffprobe -v error -show_streams -show_format -of json "$OUT"

# For MP4-from-TS: confirm moov atom is present and AAC audio decodes:
ffprobe -v error -select_streams a:0 -show_entries stream=codec_name,sample_rate,channels "$OUT"

# For TS-from-MP4: confirm packets are Annex-B — first video packet should start 0x00 0x00 0x00 0x01:
ffmpeg -i "$OUT" -map 0:v:0 -c copy -f h264 - 2>/dev/null | xxd | head -1
#                                       ^^^ raw Annex-B H.264

Playback test: open in VLC or ffplay. A bad bsf → corrupt / garbled video but valid container structure (ffprobe will say "OK", playback will say "no").

Available scripts

• scripts/bsf.py — subcommand-driven runner for the common bsf tasks (mp4-to-ts, ts-to-mp4, fix-packed-bframes, level, strip-sei, trace, zero-ts). Auto-detects H.264 vs HEVC via ffprobe and picks the matching *_mp4toannexb filter.

Workflow

# Convert MP4 to TS (auto-detects codec):
uv run ${CLAUDE_SKILL_DIR}/scripts/bsf.py mp4-to-ts --input in.mp4 --output out.ts

# Convert TS to MP4 with aac_adtstoasc:
uv run ${CLAUDE_SKILL_DIR}/scripts/bsf.py ts-to-mp4 --input in.ts --output out.mp4

# Fix packed B-frames:
uv run ${CLAUDE_SKILL_DIR}/scripts/bsf.py fix-packed-bframes --input old.avi --output fixed.mp4

# Rewrite H.264 level to 4.1:
uv run ${CLAUDE_SKILL_DIR}/scripts/bsf.py level --input in.mp4 --output out.mp4 --level 4.1

# Strip SEI:
uv run ${CLAUDE_SKILL_DIR}/scripts/bsf.py strip-sei --input in.mp4 --output out.mp4

# Zero-base PTS/DTS on both streams:
uv run ${CLAUDE_SKILL_DIR}/scripts/bsf.py zero-ts --input in.mp4 --output out.mp4

# Dump headers:
uv run ${CLAUDE_SKILL_DIR}/scripts/bsf.py trace --input in.mp4 --stream v:0

All subcommands accept --dry-run (print the command, do not run) and --verbose (pass -loglevel info to ffmpeg).

Reference docs

• Read references/filters.md for: the full bsf reference table, codec ↔ bsf matrix, container-conversion cheat-sheet, H.264 / HEVC NAL-unit type numbers, setts expression grammar, and the full option catalog for h264_metadata / hevc_metadata / av1_metadata / filter_units.

Gotchas

• bsf only works with -c copy. Any re-encode path rewrites extradata itself and silently ignores the bsf. If your level-rewrite doesn't "stick", check you didn't accidentally pass -c:v libx264.
• Applying h264_mp4toannexb to an already-Annex-B stream used to corrupt output; ffmpeg 4.x+ auto-detects framing and becomes a no-op, but explicitly doing so on older builds is a footgun. When in doubt, probe source container first.
• MP4 → TS/HLS may be auto-handled. Modern ffmpeg inserts h264_mp4toannexb / hevc_mp4toannexb automatically when the mpegts muxer sees AVCC input. Explicit is still safer for older builds and scripting reproducibility.
• TS AAC → MP4 is NOT auto-handled. aac_adtstoasc must be passed explicitly in most builds — otherwise you get Malformed AAC bitstream detected or silent unplayable audio in the MP4.
• dump_extra=freq=k slightly inflates bitrate (SPS+PPS are tens of bytes per IDR), but it's what makes HLS / live segments joinable mid-stream.
• filter_units=remove_types= takes NAL unit type NUMBERS, not names. See references/filters.md for the table. Multiple types are |-separated.
• h264_metadata only works on H.264 streams — not HEVC, not AV1. Use the matching hevc_metadata / av1_metadata filter.
• Chain multiple bsf with comma inside the same -bsf:v flag: -bsf:v "h264_mp4toannexb,dump_extra=freq=k". Order matters — framing conversion first, then extradata manipulation, then metadata rewrite.
• bsf argument syntax uses = to separate the filter name from options, and : between options — always quote: -bsf:v "h264_metadata=level=4.1:aud=insert".
• Stream specifiers matter: -bsf:v targets video streams, -bsf:a audio, -bsf:s subtitles. Use -bsf:v:0 to target only the first video stream in a multi-stream file.
• setts expressions run in packet timebase, NOT seconds. To add 2 seconds use ts=PTS+2/TB, not ts=PTS+2. Use ffprobe -show_streams | grep time_base if unsure.
• trace_headers requires CBS support compiled into your ffmpeg build. Homebrew, Debian, and static builds from johnvansickle all ship it; some minimal stripped builds don't.
• noise is destructive — intended for robustness testing of decoders, not for production use.
• mpeg4_unpack_bframes is safe on non-packed MP4s. It detects the absence of packed B-frames and passes through untouched, so it's cheap to apply prophylactically when batch-normalising old video libraries.

Examples

Example 1: Recorded .ts won't mux to .mp4 ("Malformed AAC bitstream")

ffmpeg -i recording.ts -c copy -bsf:a aac_adtstoasc recording.mp4

Example 2: Convert MP4 to HLS segments joinable mid-stream

ffmpeg -i movie.mp4 -c copy \
  -bsf:v "h264_mp4toannexb,dump_extra=freq=k" \
  -f hls -hls_time 6 -hls_segment_type mpegts out.m3u8

Example 3: Old DivX AVI has packed B-frames, fix without re-encoding

ffmpeg -i old_divx.avi -c copy -bsf:v mpeg4_unpack_bframes -f mp4 fixed.mp4

Example 4: Claim lower H.264 Level for a picky hardware decoder

ffmpeg -i in.mp4 -c copy -bsf:v "h264_metadata=level=4.0" decoderfriendly.mp4

Example 5: Strip all SEI (timecode / closed-captions metadata) NAL units

ffmpeg -i in.mp4 -c copy -bsf:v "filter_units=remove_types=6" stripped.mp4

Example 6: Zero-base PTS/DTS on a trimmed clip

ffmpeg -ss 00:01:30 -i src.mp4 -c copy -t 30 \
  -bsf:v "setts=ts=PTS-STARTPTS" -bsf:a "setts=ts=PTS-STARTPTS" \
  clip.mp4

Troubleshooting

Error: Malformed AAC bitstream detected: use the audio bitstream filter 'aac_adtstoasc'

Cause: muxing ADTS AAC (TS/FLV source) into MP4 without the bsf. Solution: -bsf:a aac_adtstoasc.

Error: H.264 bitstream malformed, no startcode found, use the video bitstream filter 'h264_mp4toannexb'

Cause: copying AVCC-framed H.264 from MP4 into TS/FLV without converting framing. Solution: -bsf:v h264_mp4toannexb.

Error: Bitstream filter 'h264_metadata' not found

Cause: your ffmpeg build was compiled without CBS support (rare — check ffmpeg -bsfs). Solution: install a standard build (Homebrew / static johnvansickle / Debian ffmpeg).

Output has visual glitches after applying h264_mp4toannexb

Cause: source was already Annex-B (e.g. .ts), filter applied to already-converted stream. Solution: probe source container first. On modern ffmpeg the filter no-ops safely, but you may be on an older build — remove the flag when source is .ts / .flv.

-bsf:v appears to do nothing (e.g. level stays the same)

Cause: an -c:v ... re-encoder is active and overriding extradata. Solution: use -c copy (or -c:v copy). bsf only runs on copied streams.

filter_units=remove_types= drops too much / too little

Cause: passing a type name instead of the numeric type, or using H.264 numbers against HEVC (type spaces are different). Solution: check references/filters.md for the type tables.

setts produces out-of-order DTS

Cause: expression doesn't preserve the DTS ≤ PTS invariant. Solution: rewrite both — setts=pts=PTS-STARTPTS:dts=DTS-STARTDTS — and avoid expressions that can push DTS past PTS on B-frame streams.