Cesiumjs time properties

CesiumJS Time, Properties & Animation

Version baseline: CesiumJS v1.143

Covers the temporal data-binding layer: Clock/JulianDate time system, the Property hierarchy that makes entity attributes change over time, interpolation algorithms, splines, and material properties. Properties live here (not with Entities) because SampledProperty and CallbackProperty are meaningless without Clock/JulianDate. The Material class (Fabric) belongs in cesiumjs-materials-shaders.

JulianDate -- The Time Primitive

Stores whole days + fractional seconds separately for precision. Always uses TAI internally.

import { JulianDate } from "cesium";

// Creation: fromIso8601 (most common), fromDate, now
const date = JulianDate.fromIso8601("2025-06-15T12:00:00Z");
const jd = JulianDate.fromDate(new Date("2025-06-15T12:00:00Z"));
const now = JulianDate.now();

// Conversion: toIso8601, toDate, toGregorianDate
const iso = JulianDate.toIso8601(date); // "2025-06-15T12:00:00Z"
const greg = JulianDate.toGregorianDate(date); // {year, month, day, hour, ...}

// Arithmetic -- all require a result parameter to avoid allocations
const r = new JulianDate();
JulianDate.addSeconds(date, 3600, r); // also: addMinutes, addHours, addDays

// Differences and comparisons
const stop = JulianDate.addHours(date, 24, new JulianDate());
JulianDate.secondsDifference(stop, date); // 86400
JulianDate.lessThan(date, stop);          // true
JulianDate.compare(date, stop);           // negative (date < stop)

Clock -- Simulation Time Controller

The Viewer creates a Clock automatically. Configure it to control playback speed and bounds.

import { Viewer, JulianDate, ClockRange, ClockStep } from "cesium";

const viewer = new Viewer("cesiumContainer");
const start = JulianDate.fromIso8601("2025-06-15T00:00:00Z");
const stop = JulianDate.addHours(start, 24, new JulianDate());
viewer.clock.startTime = start.clone();
viewer.clock.stopTime = stop.clone();
viewer.clock.currentTime = start.clone();
viewer.clock.clockRange = ClockRange.LOOP_STOP; // loop at end
viewer.clock.multiplier = 60;                   // 60x real-time
viewer.clock.shouldAnimate = true;
viewer.timeline.zoomTo(start, stop);

viewer.clock.onTick.addEventListener((clock) => { // per-frame callback
  console.log(JulianDate.toIso8601(clock.currentTime));
});

ClockRange	Behavior
UNBOUNDED	Advances forever in both directions
CLAMPED	Stops at start/stop time
LOOP_STOP	Wraps from stop back to start

ClockStep	Behavior
TICK_DEPENDENT	Each tick advances by multiplier seconds (frame-dependent)
SYSTEM_CLOCK_MULTIPLIER	Elapsed wall time x multiplier (default)
SYSTEM_CLOCK	Real-time; ignores multiplier

TimeInterval & TimeIntervalCollection

import { TimeInterval, TimeIntervalCollection, JulianDate } from "cesium";

const interval = TimeInterval.fromIso8601({
  iso8601: "2025-06-15T00:00:00Z/2025-06-16T00:00:00Z",
  data: { phase: "daylight" },  // attach arbitrary data
});
TimeInterval.contains(interval, JulianDate.fromIso8601("2025-06-15T12:00:00Z")); // true

// Used by Entity.availability to cull entities outside the time window
const availability = new TimeIntervalCollection([
  new TimeInterval({
    start: JulianDate.fromIso8601("2025-06-15T00:00:00Z"),
    stop: JulianDate.fromIso8601("2025-06-16T00:00:00Z"),
  }),
]);

Property System -- Time-Varying Values

Every entity attribute is a Property. CesiumJS calls property.getValue(time) each frame.

ConstantProperty

Returns the same value regardless of time. CesiumJS auto-wraps raw values, so explicit use is rare.

import { ConstantProperty, Color } from "cesium";
const prop = new ConstantProperty(Color.RED);
prop.setValue(Color.BLUE); // fires definitionChanged

SampledProperty -- Interpolated Time Series

Stores discrete samples and interpolates. Type can be Number, Cartesian3, Color, or any Packable.

import { SampledProperty, JulianDate, LagrangePolynomialApproximation, ExtrapolationType } from "cesium";

const prop = new SampledProperty(Number);
const t0 = JulianDate.fromIso8601("2025-06-15T00:00:00Z");
prop.addSample(t0, 1.0);
prop.addSample(JulianDate.addSeconds(t0, 60, new JulianDate()), 2.5);
prop.addSample(JulianDate.addSeconds(t0, 120, new JulianDate()), 1.0);
prop.getValue(JulianDate.addSeconds(t0, 30, new JulianDate())); // ~1.75

// Default: LinearApproximation degree 1. Switch to smoother Lagrange:
prop.setInterpolationOptions({ interpolationDegree: 5, interpolationAlgorithm: LagrangePolynomialApproximation });
prop.forwardExtrapolationType = ExtrapolationType.HOLD; // hold last value outside range

SampledPositionProperty -- Interpolated Positions

Specialized for Cartesian3 positions. Supports reference frames (ReferenceFrame.FIXED default, or INERTIAL).

import { SampledPositionProperty, JulianDate, Cartesian3, LagrangePolynomialApproximation, ExtrapolationType } from "cesium";

const position = new SampledPositionProperty();
const start = JulianDate.fromIso8601("2025-06-15T00:00:00Z");
for (let i = 0; i <= 360; i += 45) {
  const rad = (i * Math.PI) / 180;
  position.addSample(
    JulianDate.addSeconds(start, i, new JulianDate()),
    Cartesian3.fromDegrees(-112 + 0.045 * Math.cos(rad), 36 + 0.03 * Math.sin(rad), 2000 + Math.random() * 500),
  );
}
position.setInterpolationOptions({ interpolationDegree: 5, interpolationAlgorithm: LagrangePolynomialApproximation });
position.forwardExtrapolationType = ExtrapolationType.HOLD;

Algorithm	Best For	Degree
LinearApproximation	Fast piecewise-linear	1 (fixed)
LagrangePolynomialApproximation	Smooth curves from sparse samples	1--9
HermitePolynomialApproximation	Smooth curves with velocity derivatives	1--9

CallbackProperty -- Computed on Demand

Evaluates a function every frame. Second argument (isConstant) must be false if value changes.

import { CallbackProperty, Color, JulianDate } from "cesium";

const startTime = JulianDate.now();
const pulse = new CallbackProperty((time, result) => {
  const s = JulianDate.secondsDifference(time, startTime);
  return Color.RED.withAlpha(0.5 + 0.5 * Math.sin(s * 2), result ?? new Color());
}, false);

// Growing polygon -- mutate the array, property auto-updates
const pts = [/* initial Cartesian3[] */];
const dynamicPts = new CallbackProperty(() => pts, false);

CompositeProperty -- Stitching Properties Over Time

Delegates to different sub-properties for different time ranges. Each interval's data is a Property.

import { CompositeProperty, ConstantProperty, SampledProperty, TimeInterval, JulianDate } from "cesium";

const composite = new CompositeProperty();
composite.intervals.addInterval(TimeInterval.fromIso8601({
  iso8601: "2025-06-15T00:00:00Z/2025-06-15T12:00:00Z", data: new ConstantProperty(1.0) }));
const sampled = new SampledProperty(Number);
sampled.addSample(JulianDate.fromIso8601("2025-06-15T12:00:00Z"), 1.0);
sampled.addSample(JulianDate.fromIso8601("2025-06-16T00:00:00Z"), 5.0);
composite.intervals.addInterval(TimeInterval.fromIso8601({
  iso8601: "2025-06-15T12:00:00Z/2025-06-16T00:00:00Z", isStartIncluded: false, data: sampled }));

VelocityOrientationProperty -- Auto-Orient Along Path

Computes Quaternion from a position property's velocity. Essential for vehicles and aircraft.

import { VelocityOrientationProperty, SampledPositionProperty } from "cesium";
const position = new SampledPositionProperty();
// ... add samples ...
viewer.entities.add({
  position, orientation: new VelocityOrientationProperty(position),
  model: { uri: "aircraft.glb", minimumPixelSize: 64 },
});

ReferenceProperty -- Cross-Entity Binding

Links one entity's property to another by ID string ("entityId#propertyPath").

import { ReferenceProperty } from "cesium";
viewer.entities.add({ id: "leader", position: Cartesian3.fromDegrees(-75, 40, 1000) });
viewer.entities.add({ id: "follower",
  position: ReferenceProperty.fromString(viewer.entities, "leader#position"),
  point: { pixelSize: 10 } });

Material Properties

Control entity surface appearance. All options accept raw values or Property instances for time-dynamic behavior. Surface types: ColorMaterialProperty, ImageMaterialProperty, GridMaterialProperty, StripeMaterialProperty, CheckerboardMaterialProperty. Polyline types: PolylineArrowMaterialProperty, PolylineDashMaterialProperty, PolylineGlowMaterialProperty, PolylineOutlineMaterialProperty.

import { ColorMaterialProperty, SampledProperty, Color, JulianDate } from "cesium";

const solid = new ColorMaterialProperty(Color.RED);

// Time-varying color via SampledProperty
const colorProp = new SampledProperty(Color);
const t0 = JulianDate.fromIso8601("2025-06-15T00:00:00Z");
colorProp.addSample(t0, Color.BLUE);
colorProp.addSample(JulianDate.addHours(t0, 6, new JulianDate()), Color.RED);
const animated = new ColorMaterialProperty(colorProp);

Segmented Path Materials (1.143+)

PathMode.WHOLE preserves the original behavior: the material evaluated at the current simulation time colors the entire visible path. Use PathMode.PORTIONS to keep past and future path portions colored by the material at each portion's time.

Prefer interval materials for discrete phases because Cesium splits only at the interval boundaries:

import {
  Color, ColorMaterialProperty, CompositeMaterialProperty,
  PathMode, TimeInterval,
} from "cesium";

const phases = new CompositeMaterialProperty();
phases.intervals.addInterval(TimeInterval.fromIso8601({
  iso8601: "2026-07-15T12:00:00Z/2026-07-15T12:02:00Z",
  isStopIncluded: false,
  data: new ColorMaterialProperty(Color.LIME),
}));
phases.intervals.addInterval(TimeInterval.fromIso8601({
  iso8601: "2026-07-15T12:02:00Z/2026-07-15T12:04:00Z",
  data: new ColorMaterialProperty(Color.ORANGE),
}));

viewer.entities.add({
  position, // a time-dynamic PositionProperty
  path: {
    material: phases,
    materialMode: PathMode.PORTIONS,
    resolution: 30,
    leadTime: 240,
    trailTime: 240,
    width: 6,
  },
});

materialMode is a Property, not only a fixed enum. Use a time-varying mode when the same path should switch rendering strategies during a simulation:

import {
  PathGraphics, PathMode, TimeInterval, TimeIntervalCollectionProperty,
} from "cesium";

const mode = new TimeIntervalCollectionProperty();
mode.intervals.addInterval(TimeInterval.fromIso8601({
  iso8601: "2026-07-15T12:00:00Z/2026-07-15T12:02:00Z",
  isStopIncluded: false,
  data: PathMode.PORTIONS,
}));
mode.intervals.addInterval(TimeInterval.fromIso8601({
  iso8601: "2026-07-15T12:02:00Z/2026-07-15T12:04:00Z",
  data: PathMode.WHOLE,
}));

const path = new PathGraphics({ material: phases, materialMode: mode });
viewer.entities.add({ position, path });

For an interpolated color transition, pass a SampledProperty(Color) to ColorMaterialProperty and keep materialMode: PathMode.PORTIONS. Cesium creates split points at roughly each resolution step. Use the largest step that preserves the intended transition and bound leadTime/trailTime; tiny steps over long windows create many polylines.

• Positive fractional resolutions are valid. In PORTIONS mode, a non-positive resolution safely falls back to 60 seconds.
• Keep the default WHOLE mode for constant materials; segmentation adds no value.
• CesiumJS 1.143 types include materialMode in PathGraphics.ConstructorOptions but omit the instance member. Set it in the constructor/entity object as above for TypeScript; direct runtime mutation is valid JavaScript but needs a narrow local type augmentation or cast.

Splines -- Parametric Curve Interpolation

Splines use unitless parametric time (not JulianDate) for smooth animation curves.

import { HermiteSpline, CatmullRomSpline, Cartesian3 } from "cesium";

// Natural cubic (C2, auto-tangents)
const spline = HermiteSpline.createNaturalCubic({
  times: [0, 1.5, 3, 4.5, 6],
  points: [
    new Cartesian3(1235398, -4810983, 4146266), new Cartesian3(1372574, -5345182, 4606657),
    new Cartesian3(-757983, -5542796, 4514323), new Cartesian3(-2821260, -5248423, 4021290),
    new Cartesian3(-2539788, -4724797, 3620093) ],
});
const point = spline.evaluate(2.0); // evaluate at parametric time t=2

// CatmullRom (C1, auto-tangents from control points)
const catmull = new CatmullRomSpline({ times: [0, 1, 2, 3], points: [p0, p1, p2, p3] });

Spline	Use
LinearSpline	Piecewise-linear (C0), cheapest
HermiteSpline	Cubic with tangents (C1+); factories: createNaturalCubic, createClampedCubic, createC1
CatmullRomSpline	Auto-tangents from control points (C1)
QuaternionSpline	Rotation interpolation via SLERP (C1)
ConstantSpline	Single value for all times
SteppedSpline	Holds value until next control point
MorphWeightSpline	glTF morph target weights (C1)

CZML Temporal Data

CZML streams time-dynamic data. The document packet sets the clock; entity packets use epoch + offset arrays for compact positions. Position format: [secondsFromEpoch, lon, lat, alt, ...].

import { Viewer, CzmlDataSource } from "cesium";
const czml = [
  { id: "document", version: "1.0", clock: {
      interval: "2025-06-15T00:00:00Z/2025-06-15T06:00:00Z",
      currentTime: "2025-06-15T00:00:00Z", multiplier: 60,
      range: "LOOP_STOP", step: "SYSTEM_CLOCK_MULTIPLIER" } },
  { id: "aircraft", availability: "2025-06-15T00:00:00Z/2025-06-15T06:00:00Z",
    position: { epoch: "2025-06-15T00:00:00Z",
      cartographicDegrees: [0,-75,40,10000, 10800,-88,42,11000, 21600,-118,34,9000],
      interpolationAlgorithm: "LAGRANGE", interpolationDegree: 5 },
    point: { pixelSize: 10, color: { rgba: [255,255,0,255] } } },
];
const ds = await CzmlDataSource.load(czml);
const viewer = new Viewer("cesiumContainer", { shouldAnimate: true });
viewer.dataSources.add(ds);
viewer.zoomTo(ds);

CZML accepts the enum name directly. To retain phase colors along a path, set path.materialMode to "PORTIONS" and provide path.material as an array of interval-tagged material packets. Keep "WHOLE" or omit the field for legacy whole-path behavior.

EasingFunction -- Camera Flight Curves

Constants for camera.flyTo timing (not Property interpolation). Common values: LINEAR_NONE, CUBIC_IN_OUT, QUADRATIC_IN_OUT. Full set includes QUARTIC, QUINTIC, SINUSOIDAL, EXPONENTIAL, CIRCULAR, ELASTIC, BACK, BOUNCE variants (each with _IN, _OUT, _IN_OUT).

import { EasingFunction, Cartesian3 } from "cesium";
viewer.camera.flyTo({
  destination: Cartesian3.fromDegrees(-75, 40, 50000),
  duration: 3.0,
  easingFunction: EasingFunction.CUBIC_IN_OUT,
});

Putting It Together: Animated Flight

Combines Clock, SampledPositionProperty, VelocityOrientationProperty, and availability.

import {
  Viewer, JulianDate, ClockRange, SampledPositionProperty, VelocityOrientationProperty,
  TimeIntervalCollection, TimeInterval, Cartesian3, LagrangePolynomialApproximation,
} from "cesium";

const viewer = new Viewer("cesiumContainer", { shouldAnimate: true });
const start = JulianDate.fromIso8601("2025-06-15T16:00:00Z");
const stop = JulianDate.addSeconds(start, 360, new JulianDate());
viewer.clock.startTime = start.clone();
viewer.clock.stopTime = stop.clone();
viewer.clock.currentTime = start.clone();
viewer.clock.clockRange = ClockRange.LOOP_STOP;
viewer.clock.multiplier = 10;
viewer.timeline.zoomTo(start, stop);

const position = new SampledPositionProperty();
for (let i = 0; i <= 360; i += 45) {
  const r = (i * Math.PI) / 180;
  position.addSample(JulianDate.addSeconds(start, i, new JulianDate()),
    Cartesian3.fromDegrees(-112 + 0.045 * Math.cos(r), 36 + 0.03 * Math.sin(r), 2000));
}
position.setInterpolationOptions({ interpolationDegree: 5, interpolationAlgorithm: LagrangePolynomialApproximation });

viewer.trackedEntity = viewer.entities.add({
  availability: new TimeIntervalCollection([new TimeInterval({ start, stop })]),
  position, orientation: new VelocityOrientationProperty(position),
  model: { uri: "aircraft.glb", minimumPixelSize: 64 },
  path: { resolution: 1, width: 10 },
});

Performance Tips

1. Prefer SampledPositionProperty over CallbackProperty for positions -- binary search is faster than per-frame callbacks.
2. Keep interpolationDegree at 5 or below; higher risks Runge's phenomenon with sparse data.
3. Reuse JulianDate result parameters in loops to avoid GC pressure.
4. Set entity availability to cull entities outside the current time window.
5. In CallbackProperty, return the result object to avoid allocations.
6. Load bulk temporal data via CzmlDataSource -- optimized for batch sample insertion.
7. Use ExtrapolationType.HOLD instead of duplicate trailing samples.
8. Use ClockStep.TICK_DEPENDENT for deterministic replay; SYSTEM_CLOCK_MULTIPLIER varies with frame rate.
9. Minimize CallbackProperty count -- each runs its function every frame.
10. Prefer interval-based PORTIONS path materials; sampled materials trade smoother transitions for approximately one segment per resolution step.

Key Enums

ClockRange: UNBOUNDED, CLAMPED, LOOP_STOP. ClockStep: TICK_DEPENDENT, SYSTEM_CLOCK_MULTIPLIER, SYSTEM_CLOCK. ExtrapolationType: NONE, HOLD, EXTRAPOLATE. PathMode (v1.143+): WHOLE, PORTIONS. TimeStandard: UTC, TAI. ReferenceFrame: FIXED, INERTIAL. TrackingReferenceFrame (v1.124+): AUTODETECT, ECI, ECEF, INERTIAL, ENU.

See Also

• cesiumjs-entities -- Entity, Graphics types, DataSources (consumers of properties)
• cesiumjs-viewer-setup -- Viewer, ClockViewModel, Timeline widget
• cesiumjs-models-particles -- Model, ModelAnimation (uses time system for playback)