Skip to the rows

agentsclimarketplace

Adapter trimming

Skill BioTender-max/awesome-bio-agent-skills/skills/bioskills/adapter-trimming

A curated collection of AI agent skills for biomedical research, covering genomics, proteomics, single-cell analysis, clinical AI, and protein design.

Install

npx -y skills add BioTender-max/awesome-bio-agent-skills --skill adapter-trimming

Assembled from the repository path, not quoted from the project. Check it against their README if it does not work.

One thing to look at

no licenseNo license file was found in the repository. Code published without one is not open source by default, so using it at work is a question for whoever answers licensing questions where you are.

What its author says it does

Copied from the file, not written here

Remove sequencing adapters from FASTQ files using Cutadapt and Trimmomatic. Supports single-end and paired-end reads, Illumina TruSeq, Nextera, and custom adapter sequences. Use when FastQC shows adapter contamination or before alignment of short reads.

SKILL.md

5.8 KB, as published. Nobody here has run it

Version Compatibility

Reference examples tested with: FastQC 0.12+, Trimmomatic 0.39+, cutadapt 4.4+, fastp 0.23+

Before using code patterns, verify installed versions match. If versions differ:

CLI: <tool> --version then <tool> --help to confirm flags

If code throws ImportError, AttributeError, or TypeError, introspect the installed package and adapt the example to match the actual API rather than retrying.

Adapter Trimming

Remove sequencing adapters from reads using Cutadapt (precise, flexible) or Trimmomatic (paired-end optimized).

"Trim adapters from reads" → Remove sequencing adapter sequences from FASTQ reads to prevent adapter contamination in downstream alignment.

CLI: cutadapt -a ADAPTER -o out.fq in.fq or trimmomatic PE with ILLUMINACLIP
CLI: fastp -i in.fq -o out.fq (auto-detects adapters)

Common Adapter Sequences

Platform/Kit	Adapter	Sequence
Illumina TruSeq	Read 1 3'	AGATCGGAAGAGCACACGTCTGAACTCCAGTCA
Illumina TruSeq	Read 2 3'	AGATCGGAAGAGCGTCGTGTAGGGAAAGAGTGT
Nextera	Transposase	CTGTCTCTTATACACATCT
Small RNA	3' adapter	TGGAATTCTCGGGTGCCAAGG
Poly-A	Poly-A tail	AAAAAAAAAAAAAAAA

Cutadapt

Single-End Reads

# 3' adapter (most common)
cutadapt -a AGATCGGAAGAGC -o trimmed.fastq.gz sample.fastq.gz

# 5' adapter
cutadapt -g ACGTACGT -o trimmed.fastq.gz sample.fastq.gz

# Both ends
cutadapt -a ADAPTER1 -g ADAPTER2 -o trimmed.fastq.gz sample.fastq.gz

# Multiple adapters (tries each)
cutadapt -a ADAPTER1 -a ADAPTER2 -a ADAPTER3 -o trimmed.fastq.gz sample.fastq.gz

Paired-End Reads

# Basic paired-end
cutadapt -a AGATCGGAAGAGCACACGTCTGAACTCCAGTCA \
         -A AGATCGGAAGAGCGTCGTGTAGGGAAAGAGTGT \
         -o trimmed_R1.fastq.gz -p trimmed_R2.fastq.gz \
         sample_R1.fastq.gz sample_R2.fastq.gz

# Short form for Illumina TruSeq (auto-detect)
cutadapt -a AGATCGGAAGAGC -A AGATCGGAAGAGC \
         -o trimmed_R1.fastq.gz -p trimmed_R2.fastq.gz \
         sample_R1.fastq.gz sample_R2.fastq.gz

Adapter Options

# Error rate (default 0.1 = 10% mismatches allowed)
cutadapt -a ADAPTER -e 0.15 -o out.fq in.fq

# Minimum overlap (default 3)
cutadapt -a ADAPTER -O 5 -o out.fq in.fq

# No indels in adapter alignment
cutadapt -a ADAPTER --no-indels -o out.fq in.fq

# Trim Ns from ends
cutadapt --trim-n -o out.fq in.fq

# Anchored adapters (must be at end)
cutadapt -a ADAPTER$ -o out.fq in.fq

Linked Adapters

# 5' adapter followed by 3' adapter (same read)
cutadapt -a ADAPTER1...ADAPTER2 -o out.fq in.fq

# Anchored 5' linked to 3'
cutadapt -a ^ADAPTER1...ADAPTER2 -o out.fq in.fq

Filtering After Trimming

# Minimum length (discard shorter)
cutadapt -a ADAPTER -m 20 -o out.fq in.fq

# Maximum length
cutadapt -a ADAPTER -M 150 -o out.fq in.fq

# Maximum N content
cutadapt -a ADAPTER --max-n 0.1 -o out.fq in.fq

# Discard trimmed reads
cutadapt -a ADAPTER --discard-trimmed -o out.fq in.fq

# Discard untrimmed reads
cutadapt -a ADAPTER --discard-untrimmed -o out.fq in.fq

Paired-End Filtering

# Both reads must pass minimum length
cutadapt -a ADAPT1 -A ADAPT2 -m 20 \
         -o R1.fq -p R2.fq in_R1.fq in_R2.fq

# Output too-short reads separately
cutadapt -a ADAPT1 -A ADAPT2 -m 20 \
         --too-short-output short_R1.fq --too-short-paired-output short_R2.fq \
         -o R1.fq -p R2.fq in_R1.fq in_R2.fq

Action Options

# Mask adapter instead of trim (replace with N)
cutadapt -a ADAPTER --action=mask -o out.fq in.fq

# Retain adapter but lowercase
cutadapt -a ADAPTER --action=lowercase -o out.fq in.fq

# Just find adapters, don't modify
cutadapt -a ADAPTER --action=none -o out.fq in.fq

Trimmomatic

Single-End Mode

trimmomatic SE -phred33 \
    input.fastq.gz output.fastq.gz \
    ILLUMINACLIP:adapters.fa:2:30:10

Paired-End Mode

trimmomatic PE -phred33 -threads 4 \
    input_R1.fastq.gz input_R2.fastq.gz \
    output_R1_paired.fastq.gz output_R1_unpaired.fastq.gz \
    output_R2_paired.fastq.gz output_R2_unpaired.fastq.gz \
    ILLUMINACLIP:TruSeq3-PE-2.fa:2:30:10

ILLUMINACLIP Parameters

ILLUMINACLIP:<fastaWithAdapters>:<seed>:<palindrome>:<simple>

# Parameters:
# seed - max mismatches in 16bp seed (usually 2)
# palindrome - threshold for palindrome match (usually 30)
# simple - threshold for simple match (usually 10)

# Example with all options
ILLUMINACLIP:adapters.fa:2:30:10:2:keepBothReads

Built-in Adapter Files

Trimmomatic includes adapter files:

TruSeq2-SE.fa - TruSeq v2 single-end
TruSeq2-PE.fa - TruSeq v2 paired-end
TruSeq3-SE.fa - TruSeq v3 single-end
TruSeq3-PE.fa - TruSeq v3 paired-end
TruSeq3-PE-2.fa - TruSeq v3 PE (palindrome mode)
NexteraPE-PE.fa - Nextera paired-end

Find Trimmomatic Adapters

# Find adapter directory
TRIMMOMATIC_JAR=$(which trimmomatic | xargs dirname)/../share/trimmomatic-*/adapters/

# Or with conda
ls $CONDA_PREFIX/share/trimmomatic-*/adapters/

Performance

# Cutadapt with multiple cores
cutadapt -j 8 -a ADAPTER -o out.fq in.fq

# Trimmomatic threads
trimmomatic PE -threads 8 ...

Verify Trimming

# Check adapter removal with FastQC
fastqc trimmed.fastq.gz

# Count reads before/after
zcat input.fastq.gz | wc -l
zcat trimmed.fastq.gz | wc -l

Related Skills

quality-reports - Check adapter content with FastQC
quality-filtering - Quality trimming after adapter removal
fastp-workflow - Combined adapter and quality trimming

Keep looking

Skills are one crate of 328,083. Ordering is by how many stacks a row turns up in, so the top of any crate is what has actually been picked rather than what has the most stars.