Agent continuity harness

Agent Continuity Harness (ACH)

Agent Continuity Harness is the formal project name, with agent-continuity-harness as the repository slug. Use ach as its short invocation name.

ACH routes long-running AI collaboration through two internal modes:

• guard-mode: lightweight drift control, boundary stabilization, and minimal readback for normal multi-turn work.
• continuity-mode: formal state, handoff, recovery, and cross-window continuation when chat history is no longer enough.

Do not ask the user to choose between internal modules unless they explicitly ask about internals.

Default Routing

1. Start in guard-mode when the task has no formal state root, recovery dependency, migration, binding, or window handoff requirement.
2. Use references/adg/guard.md for guard-mode behavior.
3. Enter continuity-mode when the task depends on formal state, recovery, .cca-bindings.json, state migration, or a cross-window handoff.
4. Use references/cca/entry.md for continuity-mode startup.
5. Return to guard-mode when formal continuity is no longer needed and the preserved state is sufficient for future recovery.

Continuity Rules

When entering continuity-mode:

• Read the workspace .cca-bindings.json before assuming a state root.
• Reuse an existing valid formal state root when one exists.
• Create a new formal state root only when the task actually needs durable continuation and no valid root exists.
• Keep current-goal, confirmed-constraints, pending-items, and decisions distinct.
• Treat unresolved assumptions as assumptions, not confirmed facts.

Use assets/state-templates/ only as templates for new formal state roots. The templates are not themselves live state.

Use references/cca/outer.md for formal state write decisions, externalization gates, and state-effect rules. Use references/architecture-branch-map.md and references/design-constraints.md when changing ACH architecture branches, scoped design constraints, or public-project positioning.

User-Facing Status Rendering

When the user asks for current status, progress, what to do next, or to continue a bound task, recover from ACH state internally but answer in a user-facing status view by default.

When a formal state root is bound and the CLI is available, prefer ach status <task-key> --json as the mechanical source for this view instead of manually reconstructing current route, blockers, artifacts, and read order from state files.

Default status answers should show only:

• current route or active mouth
• current usable state
• active rules or constraints that affect the next step
• current blockers or open decisions
• the next suggested action

Do not show formal state root mechanics, manifest details, supplemental document inventory, validator internals, or a full recovery-core dump unless the user explicitly asks for audit detail, handoff detail, internals, or the raw state view.

In Codex usage, the chat viewport is the user-facing status surface. CLI status output is a backend extraction payload for the skill, not the raw user-facing view.

State-Effect Router

When the user asks to record, externalize, checkpoint, continue from, pause, or correct durable task state, route the state effect to the smallest appropriate ACH state target. Do not ask the user to choose a file unless the state effect is ambiguous and cannot be inferred from the current state root.

Use this routing before editing state:

• route, mouth, current entry, or current valid artifacts changed: update active-context when present; update current-goal if the recovery core would otherwise become stale
• confirmed active rule or constraint changed: update confirmed-constraints; also update active-context when it affects immediate recovery
• branch tried, rejected, downgraded, or preserved as diagnostic: update branch-attempt-ledger when present, or reference the branch outcome from decisions when no supplemental layer is active
• reusable chart, config, workbook output, script, generated table, or summary created: update artifact-provenance-index when present
• dependency, conflict, supersession, invalidation, inverted constraint, or impact relation matters for future reasoning: update state-relation-index when present
• ordinary unresolved next step or non-blocking follow-up: update pending-items

After choosing the write target, close the write-to-use loop. A state write is not complete merely because content was added to a file; it is complete only when a future session can recover and use the intended effect from state.

For every durable state edit, check:

• current recovery: if the edit changes what should be treated as current, update active-context or the four-file recovery core so compact recovery and user-facing status can see it
• read path: if the edit changes what should be read next, update read order, current artifacts, current blockers, or the relevant read_when surface
• validity relations: if the edit changes old state validity, mark the old item as superseded, diagnostic, rejected, or with a replacement/relation instead of leaving competing states active
• artifact linkage: if the edit creates or updates reusable artifacts, connect depends_on and source_paths when available and distinguish active evidence from diagnostic evidence
• user-facing effect: if the user would expect this edit to affect "what is current", make sure the user-facing status answer would include the effect without relying on chat memory
• validation: run the affected task's ACH validation when practical; if validation cannot run, say so explicitly

When a formal state root is bound and the CLI is available, use ach check-write <task-key> --json after durable state edits to mechanize this closure check. Use ach add-supplemental and ach artifact add/check for standard supplemental document and artifact-index maintenance instead of manually editing manifest entries when those commands cover the needed change.

If an edit is useful only as cold evidence and should not affect current recovery or user-facing status, keep it out of the default read path and mark the condition under which it should be read.

Only create or expand supplemental layers when the corresponding complexity risk exists, such as branch conflict, current-route ambiguity, reusable artifacts, correction impact, inverted constraints, or cross-window recovery. For ordinary tasks, keep the four-file recovery core sufficient.

Intent Workflow Presets

ACH should feel like a default workflow, not a set of commands the user must assemble. When the user uses natural task-control language, translate the intent into the corresponding ACH workflow without asking them to name ACH internals or choose files.

Use these presets by default:

• continue, resume, next, or keep going on a bound task: resolve the binding, run ach preflight <task-key> --json or ach resume <task-key> --json when practical, use ach status <task-key> --json for the current user-facing state view, read only the additionally required state files, then continue the work
• record, externalize, checkpoint, remember, or lock this in: route the state effect through State-Effect Router, use ach record <task-key> when the effect is a supported structured append, close the write-to-use loop, validate the affected task root when practical, then report only the user-visible effect
• correct, revise, rollback an assumption, or self-check for drift: identify the changed assumption, scan affected constraints, routes, artifacts, and pending items, downgrade or supersede stale state, update the current recovery path, validate when practical, then continue from the corrected state
• pause, stop here, hand off, or prepare for next window: update current goal, pending items, and active-context when present, ensure current artifacts and blockers are named, prefer ach pause <task-key> when practical, then provide a compact resume summary rather than a raw state dump
• status, progress, what next, or where are we: recover from ACH state internally, prefer ach status <task-key> --json when available, and render the user-facing status view; do not expose manifest, validator, or supplemental-document mechanics by default

If no bound formal state root exists, remain in guard-mode unless durable continuation, recovery, or cross-window handoff is actually needed. Create or bind a formal state root only when the workflow would otherwise depend on chat memory.

CLI commands are verifier and recovery tools inside these workflows, not the user-facing workflow itself. Prefer executing the needed ACH commands directly over instructing the user to run them. If a CLI command fails or is unavailable, fall back to reading and editing the formal state root directly, and say which mechanical check could not be automated.

Use ach list for routine task discovery because it stays usable when old bindings are invalid. Use ach health when the goal is strict workspace health. Use ach repair <task-key> --safe only for mechanical state-root repairs; never use it to rewrite user intent, design conclusions, or project-domain content.

Public Boundary

• Present Agent Continuity Harness as the formal project identity and ach as the invocation shorthand.
• Treat guard-mode and continuity-mode as internal operating modes.
• Do not publish adg or cca as separate user choices in normal answers.
• Do not create a second state protocol outside .cca-bindings.json and the formal state root.
• Capability packs may extend ACH, but they must not rewrite routing or state-root rules.