Rat p1p3 spec uarch policy

Spec-to-μArch Policy

Core Principles

Hierarchical Spec Compliance

Lower phases MUST NOT violate upper phase specifications: Spec → Architecture → μArch Each phase strictly adheres to decisions made in all preceding phases. Deletion, reduction, or modification of features for convenience is FORBIDDEN. If a change is needed, control returns to the upper phase for approval.

Design Priority Order

1. Functional Correctness (highest) — Every required feature works exactly
2. Interface Compliance — Ports, protocols, timing match Architecture
3. Timing/Performance — Throughput, latency targets met
4. Area/Power (lowest)

Cascading Quality

Higher abstraction levels demand MORE iterative refinement. Dynamic convergence with graduated minimums: Phase 1 (Research): min 3 rounds (chief-coordinated, fixed — P1 is the quality foundation) Phase 2 (Architecture): min 2, max 5 rounds — memory, performance, ref model consistency Phase 3 (μArch): min 2, max 5 rounds — performance, interface, memory optimization

P2/P3 use convergence criteria (finding_delta < 0.1, critical resolved, wonder stable). Principle: refine thoroughly at the top, execute efficiently at the bottom.

Document-as-Memory

Design artifacts serve as persistent memory. Each phase reads upstream documents and writes downstream documents. State at .rat/state/rat-p1p3-spec-uarch-state.json.

Execution Rules

Dual-Layer Phase Gates

Every phase transition requires BOTH:

1. Artifact Gate: Required files exist
2. Quality Gate: Reviewer(s) verify quality AND hierarchical spec compliance

Gate Retry Policy

• Artifact Gate failure: retry phase once, then escalate to user
• Quality Gate failure: pass findings to worker, re-run gate. Max 2 retries
• Upper-spec violation: IMMEDIATE STOP, return to violated upper phase

Context Preload

Before each phase, verify required upstream files exist (specific file lists defined inline in orchestrator steps).

Scratchpad Convention

During iterative review rounds: .rat/scratch/phase-{N}/round-{R}-{agent}.md Coordinator reads all round files to aggregate feedback. On phase gate PASS: consolidated review saved to reviews/, scratch cleaned.

Termination

After Phase 3 Quality Gate PASS, generate summary + ADR, then STOP. Do NOT proceed to Phase 4.

Phase Gate Definitions

Phase 1→2 (Research → Architecture)

Artifact Gate: iron-requirements.json (required; open-requirements.json optional) + io_definition.json + timing_constraints.json + domain-analysis.md exist Quality Gate:

• 3-round chief review converged (or gaps escalated and user-approved)
• Ambiguity Gate passed: ambiguity_score ≤ 0.5 (BLOCK if > 0.5)
• spec-analyst self-reviews iron-requirements.json and open-requirements.json if present (completeness, consistency)
  • Save: reviews/phase-1-research/research-review.md
• arch-designer evaluates implementation feasibility
• Per-round review artifacts: reviews/phase-1-research/research-review-r1.md, r2.md, r3.md (mandatory)
• docs/phase-1-research/ambiguity-assessment.md exists with per-axis scores
• Verdict: PASS if 3-round review converged AND ambiguity gate passed AND all requirements clear, consistent, and implementable

Summary Validation: docs/phase-1-research/phase-1-summary.md

Phase 2→3 (Architecture → μArch)

Artifact Gate: architecture.md (with D2 block diagram) + refc//.c exist Quality Gate:

• Dynamic convergence review converged (min 2 rounds, or user-approved)
• Feature Coverage: 100% REQ-NNN mapped to architecture blocks
  • Save: reviews/phase-2-architecture/feature-coverage.md
• Memory access review PASS
• Architecture ↔ ref model consistency PASS
• Architecture Diagram saved
• Wonder log: all High-risk assumptions resolved (docs/phase-2-architecture/wonder-log.md)
• Per-round review artifacts: reviews/phase-2-architecture/architecture-review-r1.md, r2.md (minimum), additional rounds if needed
• Save: reviews/phase-2-architecture/architecture-review.md
• Verdict: PASS if 100% feature coverage AND no structural defects AND review converged AND wonder stable

Phase 2 Iterative Review (dynamic convergence, coordinated by rtl-architect):

• Parallel reviewers: rtl-architect + vcodec-architecture-expert + ref-model-dev
• Each round: review → wonder step → rebuttal (designer accepts/rejects each finding with rationale) → targeted revision (only accepted findings applied; rejections recorded in per-round artifact)
• Last round (converged or max): cross-block interface audit + memory conflict analysis
• Convergence: finding_delta < 0.1, all critical resolved, wonder stable (min 2, max 5 rounds)
• After max_rounds not converged → escalate to user

Summary + ADR: phase-2-summary.md + 3-5 ADRs in docs/decisions/

Phase 3 Completion (μArch → Human Review)

Artifact Gate: docs/phase-3-uarch/*.md + bfm/ directory exist Quality Gate:

• Dynamic convergence review converged (min 2 rounds, or user-approved)
• Feature Preservation: 100% of architecture features preserved in μArch
  • Save: reviews/phase-3-uarch/feature-preservation.md
• Block boundary alignment: 1:1 with architecture.md
• μArch ↔ ref model consistency PASS
• Pipeline Diagram saved
• Wonder log: all High-risk assumptions resolved (docs/phase-3-uarch/wonder-log.md)
• Upstream feedback report generated (docs/phase-3-uarch/upstream-feedback-report.md)
• Per-round review artifacts: reviews/phase-3-uarch/uarch-review-r1.md, r2.md (minimum), additional rounds if needed
• Save: reviews/phase-3-uarch/uarch-review.md
• Verdict: PASS if 100% preservation AND timing reasonable AND review converged AND wonder stable

Phase 3 Iterative Review (dynamic convergence, coordinated by rtl-architect):

• Parallel reviewers: rtl-architect + timing-advisor + vcodec-architecture-expert + ref-model-dev
• Each round: review → wonder step → rebuttal (designer accepts/rejects each finding with rationale) → targeted revision (only accepted findings applied; rejections recorded in per-round artifact)
• Last round (converged or max): model consistency matrix + cross-module interface audit
• Convergence: finding_delta < 0.1, all critical resolved, wonder stable (min 2, max 5 rounds)
• After max_rounds not converged → escalate to user

Summary + ADR: phase-3-summary.md + 3-5 ADRs in docs/decisions/

Phase Feedback Loop Protocol

Forward Flow (Normal)

P1 → P2 → P3: Each phase reads upstream artifacts, writes downstream.

Backward Flow (Coherence Failure)

When P3 discovers P1 requirement gaps:

1. P3 generates requirement-delta.md (Step 4.5 of spec-to-uarch-orchestrator)
2. If delta contains MODIFY, ADD, or DROP actions: a. Orchestrator sets upper_spec_blocking: true b. User is consulted via AskUserQuestion c. If user approves revision: P1 re-runs with delta as input d. P2 re-runs reading updated P1 artifacts e. P3 re-runs reading updated P2 artifacts
3. Maximum feedback iterations: 2 (then escalate to user regardless)
4. Each iteration records generation number for traceability

Requirement Similarity Convergence

After feedback loop iteration:

• requirement_similarity ≥ 0.95 (P3 barely changes P1) → converged
• architecture_similarity ≥ 0.95 (P3 barely changes P2) → converged
• Otherwise → another iteration (up to max 2)

Review Convergence Criteria

Review rounds within P2 and P3 use dynamic convergence instead of fixed 3 rounds:

Parameter	Value	Rationale
min_rounds	2	Minimum for meaningful review
max_rounds	5	Prevent infinite loops
finding_delta_threshold	0.1	< 10% new findings = stable
critical_resolution	ALL	All Critical/High must be resolved
wonder_stability	true	No new High-risk assumptions

Handoff Checklist (to rat-p4p5-impl-verify)

• Phase 3 summary exists: docs/phase-3-uarch/phase-3-summary.md
• All μArch specs exist: docs/phase-3-uarch/{module}.md for each module
• Phase 3 review passed: reviews/phase-3-uarch/uarch-review.md verdict=PASS
• Feature preservation verified: reviews/phase-3-uarch/feature-preservation.md
• State file updated: .rat/state/{module}-phase-3-complete.json
• Context preload files verified: Phase 4 required upstream files exist

Escalation & Stop Conditions

• Phase 1 Quality Gate fails after 2 retries → ask user to clarify/refine spec
• Phase 2 Quality Gate fails after 2 retries → ask user for architecture direction
• Phase 3 Quality Gate fails after 2 retries → ask user for μArch decisions
• Upper-spec violation detected → STOP and report to user immediately
• Missing information → use AskUserQuestion

Coding Convention Summary

• Port prefix: i_, o_, io_. Clock: {domain}_clk. Reset: {domain}_rst_n
• snake_case or ALL_CAPS only. Parameters ALL_CAPS, localparam L_ prefix
• Instance u_, generate gen_, logic only
• SV RTL: IEEE 1800-2009. C ref model: C11

Final Checklist

• Phase 1: iron-requirements.json (open-requirements.json optional), io_definition.json, timing_constraints.json, domain-analysis.md exist
• Phase 1: research-review.md verdict=PASS, per-round reviews (r1-r3) saved, phase-1-summary.md generated
• Phase 1: ambiguity-assessment.md saved with ambiguity_score ≤ 0.5
• Phase 2: architecture.md with proper naming, refc//.c exist
• Phase 2: architecture-review.md PASS, per-round reviews (r1-r3) saved, feature-coverage.md 100%
• Phase 2: phase-2-summary.md generated, ADRs recorded
• Phase 3: docs/phase-3-uarch/*.md exist, bfm/ directory exists
• Phase 3: uarch-review.md PASS, per-round reviews (r1-r3) saved, feature-preservation.md 100%
• Phase 3: phase-3-summary.md generated, ADRs recorded
• Phase 3: wonder-log.md exists, upstream-feedback-report.md generated
• Phase 3: requirement-delta.md generated (Phase Coherence Check Step 4.5)
• Phase Coherence Check passed (all REQs implementable or user-approved deltas)
• Scratch directories cleaned
• State file updated with all phases completed
• Pipeline did NOT proceed to Phase 4