Skf update skill

Update Skill

Overview

Surgically updates existing skills when source code changes, preserving all [MANUAL] developer content while re-extracting only affected exports with full provenance tracking. Only changed exports are re-extracted — unchanged content is never touched. Every regenerated instruction must trace to code with file:line citations. Stack skills (skill_type: "stack" in metadata.json) are not supported by surgical update — use skf-create-stack-skill to re-compose from updated constituents. If a stack skill is provided, this workflow exits with a redirect message.

Conventions

• Bare paths (e.g. references/<name>.md) resolve from the skill root.
• Module-level path exception: bare paths beginning with knowledge/ or shared/ resolve from the SKF module root ({project-root}/_bmad/skf/ installed, src/ in dev), not the skill root — stage files reference knowledge/version-paths.md and knowledge/tool-resolution.md, and the terminal step chains to shared/health-check.md.
• references/ holds prompt content carved out of SKILL.md (workflow stages chained via frontmatter nextStepFile, plus static reference docs); scripts/ and assets/ hold deterministic helpers and templates.
• {skill-root} resolves to this skill's installed directory (where customize.toml lives, if present).
• {project-root}-prefixed paths resolve from the project working directory.
• {skill-name} resolves to the skill directory's basename.
• Cross-skill data coupling: stages in this workflow load four shared assets from skf-create-skill to keep extraction semantics aligned between create and update — re-extract.md pulls extraction-patterns.md, extraction-patterns-tracing.md, and tier-degradation-rules.md from skf-create-skill/references/; remote-source-resolution.md references source-resolution-protocols.md; write.md reads skill-sections.md from skf-create-skill/assets/. Update-skill assumes these files are present at install time and that their semantics are stable across the two skills' versions.

Role

You are a precision code analyst operating in Ferris Surgeon mode. This is a surgical operation, not an exploratory session. You bring AST-backed structural analysis and provenance-driven change detection expertise, while the source code provides the ground truth.

Workflow Rules

These rules apply to every step in this workflow:

• Never hallucinate — every statement must have AST provenance
• [MANUAL] sections survive regeneration with zero content loss
• Only load one step file at a time — never preload future steps
• Always communicate in {communication_language}
• If {headless_mode} is true, auto-proceed through confirmation gates with their default action and log each auto-decision

Stages

#	Step	File	Auto-proceed
1	Initialize & Load	references/init.md	No (confirm)
2	Detect Changes	references/detect-changes.md	Yes
3	Re-Extract	references/re-extract.md	Yes
4	Merge	references/merge.md	Yes
5	Validate	references/validate.md	Yes
6	Write	references/write.md	Yes
7	Report	references/report.md	Yes
8	Workflow Health Check	references/health-check.md	Yes

Invocation Contract

Aspect	Detail
Inputs	skill_name [required]
Flags	--headless / -H (auto-resolve all gates); --from-test-report (gap-driven mode); --allow-workspace-drift (gap-driven only — bypass §0.a pinning guard); --allow-degraded (headless only — pre-authorize the lossy degraded full re-extraction when the provenance map is missing, instead of halting blocked; init.md §4); --detect-only (run detect-changes only, exit before re-extract; envelope status="detect-only"); --dry-run (run detect-changes + re-extract, exit before merge/write; envelope status="dry-run" describes what would change). If both --detect-only and --dry-run are passed, --detect-only wins.
Gates	step 1: Confirm Gate [C]
Outputs	Updated SKILL.md, metadata.json, provenance-map.json, evidence-report.md (none when --detect-only or --dry-run is set — those modes are read-only inspection paths)
Concurrency	Two simultaneous real-update runs against the same skill would corrupt provenance. init.md §1b acquires a PID-file lock at {forge_data_folder}/{skill_name}/.skf-update.lock before any artifact read; live-PID collisions halt with status: "halted-for-concurrent-run". Stale locks (dead PID) are cleared silently with a warning. The lock is released by the terminal health-check step (step 8) on the normal path and by the two init-stage headless halts (§4/§6); mid-workflow halts leave it for the next run's stale-lock self-heal (see init.md §1b Release contract). Read-only modes (--detect-only, --dry-run) skip the lock entirely — they're safe alongside a concurrent real update.
Headless	All gates auto-resolve with default action when {headless_mode} is true. Each auto-resolved gate appends a {gate, default_action, taken_action, reason, evidence?} entry to headless_decisions[], surfaced in step 7's SKF_UPDATE_RESULT_JSON envelope so non-interactive runs can be audited post-hoc. A HALT reached in headless mode emits its own SKF_UPDATE_RESULT_JSON at the halt site (the site's status code plus an error: {phase, path?, reason} object) and exits — halts do not fall through to step 7. Pipeline branches on the envelope's top-level status field (success, no-changes, detect-only, dry-run, or one of the documented halted-for-*/blocked codes). The first four are successful exits — pipelines treating non-success as failure must include them in the success set. The status enum is defined once in src/shared/scripts/schemas/skf-update-result-envelope.v1.json.

On Activation

1. Load config from {project-root}/_bmad/skf/config.yaml and resolve:

   • project_name, output_folder, user_name, communication_language, document_output_language
   • skills_output_folder, forge_data_folder, sidecar_path

2. Resolve {headless_mode}: true if --headless or -H was passed as an argument, or if headless_mode: true in preferences.yaml. Default: false.

3. Resolve workflow customization. Run:

   python3 {project-root}/_bmad/scripts/resolve_customization.py \
       --skill {skill-root} --key workflow
   

   This merges the three layers per bmad-customize rules (scalars override, arrays append): {skill-root}/customize.toml (bundled defaults), _bmad/custom/<skill-name>.toml under {project-root} (team overrides), and _bmad/custom/<skill-name>.user.toml under {project-root} (personal overrides). If the script is missing or fails, read {skill-root}/customize.toml directly.

   Apply the resolved values so no surface is a silent no-op: execute each entry in workflow.activation_steps_prepend in order now; treat every entry in workflow.persistent_facts as standing context for the whole run (entries prefixed file: are paths or globs whose contents load as facts — the bundled default loads any project-context.md under {project-root}); resolve {onCompleteCommand} ← workflow.on_complete if non-empty, else empty string, and stash it in workflow context (references/report.md §5b invokes it after the result contract is written; empty string = the hook is a no-op). After activation completes, execute each entry in workflow.activation_steps_append in order before init.md runs.

4. Load, read the full file, and then execute references/init.md to begin the workflow.