Network 101
Security-audited skills for Claude, Codex & Claude Code. One-click install, quality verified.
npx -y skills add aiskillstore/marketplace --skill network-101Assembled from the repository path, not quoted from the project. Check it against their README if it does not work.
One thing to look at
- no licenseNo license file was found in the repository. Code published without one is not open source by default, so using it at work is a question for whoever answers licensing questions where you are.
What its author says it does
Copied from the file, not written here
This skill should be used when the user asks to "set up a web server", "configure HTTP or HTTPS", "perform SNMP enumeration", "configure SMB shares", "test network services", or needs guidance on configuring and testing network services for penetration testing labs.
SKILL.md
7.3 KB, as published. Nobody here has run it
Network 101
Purpose
Configure and test common network services (HTTP, HTTPS, SNMP, SMB) for penetration testing lab environments. Enable hands-on practice with service enumeration, log analysis, and security testing against properly configured target systems.
Inputs/Prerequisites
- Windows Server or Linux system for hosting services
- Kali Linux or similar for testing
- Administrative access to target system
- Basic networking knowledge (IP addressing, ports)
- Firewall access for port configuration
Outputs/Deliverables
- Configured HTTP/HTTPS web server
- SNMP service with accessible communities
- SMB file shares with various permission levels
- Captured logs for analysis
- Documented enumeration results
Core Workflow
1. Configure HTTP Server (Port 80)
Set up a basic HTTP web server for testing:
Windows IIS Setup:
- Open IIS Manager (Internet Information Services)
- Right-click Sites → Add Website
- Configure site name and physical path
- Bind to IP address and port 80
Linux Apache Setup:
# Install Apache
sudo apt update && sudo apt install apache2
# Start service
sudo systemctl start apache2
sudo systemctl enable apache2
# Create test page
echo "<html><body><h1>Test Page</h1></body></html>" | sudo tee /var/www/html/index.html
# Verify service
curl http://localhost
Configure Firewall for HTTP:
# Linux (UFW)
sudo ufw allow 80/tcp
# Windows PowerShell
New-NetFirewallRule -DisplayName "HTTP" -Direction Inbound -Protocol TCP -LocalPort 80 -Action Allow
2. Configure HTTPS Server (Port 443)
Set up secure HTTPS with SSL/TLS:
Generate Self-Signed Certificate:
# Linux - Generate certificate
sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
-keyout /etc/ssl/private/apache-selfsigned.key \
-out /etc/ssl/certs/apache-selfsigned.crt
# Enable SSL module
sudo a2enmod ssl
sudo systemctl restart apache2
Configure Apache for HTTPS:
# Edit SSL virtual host
sudo nano /etc/apache2/sites-available/default-ssl.conf
# Enable site
sudo a2ensite default-ssl
sudo systemctl reload apache2
Verify HTTPS Setup:
# Check port 443 is open
nmap -p 443 192.168.1.1
# Test SSL connection
openssl s_client -connect 192.168.1.1:443
# Check certificate
curl -kv https://192.168.1.1
3. Configure SNMP Service (Port 161)
Set up SNMP for enumeration practice:
Linux SNMP Setup:
# Install SNMP daemon
sudo apt install snmpd snmp
# Configure community strings
sudo nano /etc/snmp/snmpd.conf
# Add these lines:
# rocommunity public
# rwcommunity private
# Restart service
sudo systemctl restart snmpd
Windows SNMP Setup:
- Open Server Manager → Add Features
- Select SNMP Service
- Configure community strings in Services → SNMP Service → Properties
SNMP Enumeration Commands:
# Basic SNMP walk
snmpwalk -c public -v1 192.168.1.1
# Enumerate system info
snmpwalk -c public -v1 192.168.1.1 1.3.6.1.2.1.1
# Get running processes
snmpwalk -c public -v1 192.168.1.1 1.3.6.1.2.1.25.4.2.1.2
# SNMP check tool
snmp-check 192.168.1.1 -c public
# Brute force community strings
onesixtyone -c /usr/share/seclists/Discovery/SNMP/common-snmp-community-strings.txt 192.168.1.1
4. Configure SMB Service (Port 445)
Set up SMB file shares for enumeration:
Windows SMB Share:
- Create folder to share
- Right-click → Properties → Sharing → Advanced Sharing
- Enable sharing and set permissions
- Configure NTFS permissions
Linux Samba Setup:
# Install Samba
sudo apt install samba
# Create share directory
sudo mkdir -p /srv/samba/share
sudo chmod 777 /srv/samba/share
# Configure Samba
sudo nano /etc/samba/smb.conf
# Add share:
# [public]
# path = /srv/samba/share
# browsable = yes
# guest ok = yes
# read only = no
# Restart service
sudo systemctl restart smbd
SMB Enumeration Commands:
# List shares anonymously
smbclient -L //192.168.1.1 -N
# Connect to share
smbclient //192.168.1.1/share -N
# Enumerate with smbmap
smbmap -H 192.168.1.1
# Full enumeration
enum4linux -a 192.168.1.1
# Check for vulnerabilities
nmap --script smb-vuln* 192.168.1.1
5. Analyze Service Logs
Review logs for security analysis:
HTTP/HTTPS Logs:
# Apache access log
sudo tail -f /var/log/apache2/access.log
# Apache error log
sudo tail -f /var/log/apache2/error.log
# Windows IIS logs
# Location: C:\inetpub\logs\LogFiles\W3SVC1\
Parse Log for Credentials:
# Search for POST requests
grep "POST" /var/log/apache2/access.log
# Extract user agents
awk '{print $12}' /var/log/apache2/access.log | sort | uniq -c
Quick Reference
Essential Ports
| Service | Port | Protocol |
|---|---|---|
| HTTP | 80 | TCP |
| HTTPS | 443 | TCP |
| SNMP | 161 | UDP |
| SMB | 445 | TCP |
| NetBIOS | 137-139 | TCP/UDP |
Service Verification Commands
# Check HTTP
curl -I http://target
# Check HTTPS
curl -kI https://target
# Check SNMP
snmpwalk -c public -v1 target
# Check SMB
smbclient -L //target -N
Common Enumeration Tools
| Tool | Purpose |
|---|---|
| nmap | Port scanning and scripts |
| nikto | Web vulnerability scanning |
| snmpwalk | SNMP enumeration |
| enum4linux | SMB/NetBIOS enumeration |
| smbclient | SMB connection |
| gobuster | Directory brute forcing |
Constraints
- Self-signed certificates trigger browser warnings
- SNMP v1/v2c communities transmit in cleartext
- Anonymous SMB access is often disabled by default
- Firewall rules must allow inbound connections
- Lab environments should be isolated from production
Examples
Example 1: Complete HTTP Lab Setup
# Install and configure
sudo apt install apache2
sudo systemctl start apache2
# Create login page
cat << 'EOF' | sudo tee /var/www/html/login.html
<html>
<body>
<form method="POST" action="login.php">
Username: <input type="text" name="user"><br>
Password: <input type="password" name="pass"><br>
<input type="submit" value="Login">
</form>
</body>
</html>
EOF
# Allow through firewall
sudo ufw allow 80/tcp
Example 2: SNMP Testing Setup
# Quick SNMP configuration
sudo apt install snmpd
echo "rocommunity public" | sudo tee -a /etc/snmp/snmpd.conf
sudo systemctl restart snmpd
# Test enumeration
snmpwalk -c public -v1 localhost
Example 3: SMB Anonymous Access
# Configure anonymous share
sudo apt install samba
sudo mkdir /srv/samba/anonymous
sudo chmod 777 /srv/samba/anonymous
# Test access
smbclient //localhost/anonymous -N
Troubleshooting
| Issue | Solution |
|---|---|
| Port not accessible | Check firewall rules (ufw, iptables, Windows Firewall) |
| Service not starting | Check logs with journalctl -u service-name |
| SNMP timeout | Verify UDP 161 is open, check community string |
| SMB access denied | Verify share permissions and user credentials |
| HTTPS certificate error | Accept self-signed cert or add to trusted store |
| Cannot connect remotely | Bind service to 0.0.0.0 instead of localhost |
Gives 0 of the 12 instructions most test skills give
Counted across 964 of the 1,571 authors here whose files we hold, read 2026-08-06
- close the browser when donein 55 of 964, across 12 files
- wait for network idle statein 51 of 964, across 6 files
- launch chromium in headless modein 49 of 964, across 6 files
- use descriptive selectors for elementsin 49 of 964, across 6 files
- run provided scripts with help flag firstin 49 of 964, across 6 files
- add appropriate explicit waitsin 48 of 964, across 5 files
- use bundled scripts as black boxesin 46 of 964, across 3 files
- do not read script source codein 46 of 964, across 3 files
- use sync playwright for scriptsin 46 of 964, across 3 files
- inspect dom before executing actionsin 46 of 964, across 3 files
- run the full test suitein 36 of 964, across 34 files
- write the failing test firstin 25 of 964, across 18 files
Grouped from the skills themselves: near-identical wordings counted once, and counted by distinct author, so one author publishing three of these counts once.